James O'Shannessy
26811ad46d
AP_Landing: Autoenable fence if required when landing was aborted
2021-03-05 14:52:46 +11:00
James O'Shannessy
269fa5cbe2
AutoTest: Copter remove FENCE_AUTOENABLE tests
...
Addresses comments made in review, removes the FENCE_AUTOENABLE param for copter.
No param means no tests required.
2021-03-05 14:52:46 +11:00
James O'Shannessy
d055d7a581
ArduCopter: Cleanup - removes autoenabling of fence with AC_Fence parameter
2021-03-05 14:52:46 +11:00
James O'Shannessy
8ef68c8fb0
AC_Fence: Send text to gcs when fence is auto-enabled
2021-03-05 14:52:46 +11:00
James O'Shannessy
b4bf41c6f9
AC_Fence: Adjustments to default parameters for addition to plane
2021-03-05 14:52:46 +11:00
James O'Shannessy
5dd40afe0a
ArduPlane: Retrigger fence breach if mode
...
ArduPlane: Move auto enabling code to common fence library
2021-03-05 14:52:46 +11:00
James O'Shannessy
2c66e164d0
ArduPlane: Improvements to parameter upgrading between versions
2021-03-05 14:52:46 +11:00
James O'Shannessy
dac5996d93
AutoTest: Fix autotest conflicts after rebase on upstream
2021-03-05 14:52:46 +11:00
James O'Shannessy
e16bbe6e18
AutoTest: Ensure fence state is disabled at end of test
...
This appears to be another case of the fence state carrying over from one test to another. Disabling the fence at the end of the test appears to have fixed this problem
2021-03-05 14:52:46 +11:00
James O'Shannessy
31462418c6
AutoTest: Ensure Copter can RTL and Land even when Fence Floor has not been auto disabled
2021-03-05 14:52:46 +11:00
James O'Shannessy
f14e1c2799
ArduCopter: Ensure fence has opportunity to auto disable for landing
2021-03-05 14:52:46 +11:00
James O'Shannessy
cfb648e1c5
ArduRover: Remove fence_checks in AP_Arming because they are common across all vehicles now
2021-03-05 14:52:46 +11:00
James O'Shannessy
8ab1cf869d
ArduCopter: Remove fence_checks in AP_Arming because they are common across all vehicles now
2021-03-05 14:52:46 +11:00
James O'Shannessy
fa7be629e5
AutoTest: Make fence tests flake8 compliant
2021-03-05 14:52:46 +11:00
James O'Shannessy
af733b2f09
ArduPlane: Convert and remap old parameters
2021-03-05 14:52:46 +11:00
James O'Shannessy
01b27bdb61
AutoTest: revert change that breaks quadplane
2021-03-05 14:52:46 +11:00
James O'Shannessy
2353b55452
AutoTest: Address race conditions in changes to fence tests
2021-03-05 14:52:46 +11:00
James O'Shannessy
76a2a76b54
AutotTest: Adds autotests for Plane to test RetRally flag added to AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
f774196b52
ArduPlane: Cleanup of unnecessary comments in fence logic
2021-03-05 14:52:46 +11:00
James O'Shannessy
8545715837
AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence
2021-03-05 14:52:46 +11:00
James O'Shannessy
c316711351
ArduPlane: Add conversion from ArduPlane geofence param to AC_Fence param
2021-03-05 14:52:46 +11:00
James O'Shannessy
6f7ba3b037
AutoTest: Ensure fence is disabled at end of throttle_failsafe_fence test
2021-03-05 14:52:46 +11:00
James O'Shannessy
6251b6eead
AutoTest: Rebase and carry across changes from autotest
2021-03-05 14:52:46 +11:00
James O'Shannessy
254c28f142
AC_Fence: Improve auto enable documentation
2021-03-05 14:52:46 +11:00
James O'Shannessy
a88f2721a8
ArduCopter: Use auto enable and auto disable from AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
8a99d9dd00
ArduPlane: Use auto enable and auto disable from AC_Fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
b6d29d746b
AC_Fence: Add common auto enable and auto disable
2021-03-05 14:52:46 +11:00
James O'Shannessy
2a9affe517
ArduCopter: Remove unused fence floor enable function
2021-03-05 14:52:46 +11:00
James O'Shannessy
b2346ef6df
AutoTest: Adds additional tests to ArduCopter to test autoenable and floor
...
Adds tests for:
* Testing auto-enable disabled (when no autoenabling of the fence is required)
* Test auto-enabled always after takeoff (when takeoff complete condition met)
* Test auto-enabled disable floor only (when land sequence begins)
* Test auto- on arm/disarm (when vehicle is armed/disarmed)
* Tests ability to land when fence is breached
2021-03-05 14:52:46 +11:00
James O'Shannessy
e4f1e26b5c
AC_Fence: Disable fence floor when disabling the rest of the fence
2021-03-05 14:52:46 +11:00
James O'Shannessy
f228adfa75
ArduCopter: Improve auto-enable/disable of fence
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
dd5ede0fe0
autotest: small comment improvements
2021-03-05 14:52:46 +11:00
James O'Shannessy
bbd606b8b5
AutoTest: Corrections to autotests
2021-03-05 14:52:46 +11:00
Steven Josefs
c783410494
AC_Fence: adjusted AP_GROUPINFO to contain all copters
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
22bdc3e54c
AC_Fence: extend pre-arm checks
...
Fix comments
2021-03-05 14:52:46 +11:00
James O'Shannessy
a3efc9ad98
AutoTest: Fix MAVlite test allowing plane fence to be enabled
2021-03-05 14:52:46 +11:00
James O'Shannessy
47e76a1807
AutoTest: Move fence enable/disable to common location
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
528defd560
Autotest: activate the fence via a mavlink command
...
This should not be required in the future, please fix this and revert this commit
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
92122e5133
Copter: automatically enable and disable floor fence on automated takeoff and landing
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
2e422f249a
AC_Fence: small comment improvements. Do not call the same function four times
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
15e95be7d7
AC_Fence: do not delete the FENCE_ENABLE parameter. It would confuse many users.
...
Talked to Randy about this. The consensus was not to delete the parameter
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
8d8753b14c
Autotest: fix two copter tests after parameter rename
...
I'm not sure if a better fix would be to remove the set_parameter() call
2021-03-05 14:52:46 +11:00
James O'Shannessy
215901be30
Autotest: Correct the logic for fence based autotest functions
...
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
James O'Shannessy
783a4b7965
AC_Fence: Change logic to fence enable and sys_status reporting
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
4f7ffc5eb1
Plane: move fence disable code to a function to enable reusability
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
fef8b37b11
Plane: Address Randy review comments
2021-03-05 14:52:46 +11:00
James O'Shannessy
aae092b88f
ArduPlane: Remove all unused geofence capability
...
ArduPlane: Remove missed geofence logic
2021-03-05 14:52:46 +11:00
James O'Shannessy
a23e8d46da
AP_Vehicle: Add additional fence mode change reason
2021-03-05 14:52:46 +11:00
James O'Shannessy
8ca69c2e89
AP_Logger: Add support for fence floor events
2021-03-05 14:52:46 +11:00
James O'Shannessy
1a3e168ced
Autotest: Fence is present, but test looking for not present
...
Autotest: Remove ties to mavlink FENCE_ACTION
Autotest: Add ArduPlane autotest to test ceiling and floor
Adds a test to ensure the vehicle reverts to RTL when breaching a ceiling or floor.
Autotest: Progress the test once we reach takeoff complete and fence enable
Autotest: Use RC_OPTION for Aux Switch functionality
Autotest: Enable fence last
2021-03-05 14:52:46 +11:00