Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
8,375 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

3457 Commits

Author SHA1 Message Date
rmackay9 073e2c9f15 ACMotors: bug fix to yaw limit 2013-07-05 13:51:59 -10:00
John Boiles bb2a6b8a22 HAL_SITL: Fixing SITL build for OSX. 2013-07-05 22:36:57 +10:00
Paul Riseborough a694b781c7 AP_TECS: Add non airspeed sensor pitch to throttle mode lost during integration 2013-07-05 22:16:39 +10:00
Andrew Tridgell 25f8983383 HAL_AVR: don't initialise TWBR twice 2013-07-05 12:59:14 +10:00
Andrew Tridgell 87f6cc715d AP_TECS: fixed parameter doc formatting 2013-07-04 17:52:40 +10:00
Paul Riseborough 8082122053 TECS-WIP : Fixed bug in initialisation of DT value 2013-07-04 16:57:50 +10:00
Andrew Tridgell 904e6b5b8f AP_TECS: for _DT to at most 0.1 2013-07-04 16:56:57 +10:00
Andrew Tridgell 68232a10f9 AP_TECS: updates to use new aircraft parameter structure 2013-07-04 16:56:57 +10:00
Andrew Tridgell 89271b7774 AP_SpdHgtControl: added speed/height control interface 
this will be used by TECS
 2013-07-04 16:56:57 +10:00
Andrew Tridgell 80e0f8044c AP_AHRS: added airspeed_sensor_enabled() function 2013-07-04 16:56:57 +10:00
Paul Riseborough 5b0129e02b AP_TECS: first implemention of TECS altitude control library 2013-07-04 16:56:56 +10:00
Paul Riseborough 7bdb098e77 AP_Baro: added get_EAS2TAS() 
this provides the scaling factor between equivalent and true airspeed
based on altitude
 2013-07-04 16:56:56 +10:00
Andrew Tridgell 61361dac9b AP_Baro: added units to baro documentation 2013-07-04 16:56:56 +10:00
Paul Riseborough 3b98bbd159 AP_Baro: more precise altitude calculation on PX4 
if not using an AVR CPU then use a more computationally expensive
altitude calculation, which is more precise at higher altitudes
 2013-07-04 16:56:56 +10:00
Andrew Tridgell fff777bda2 MAVLink: update to latest upstream message defintions XML 
this adds new HIL support for airspeed, and common SIM_STATE and
RADIO_STATUS messages
 2013-07-01 15:38:45 +10:00
Andrew Tridgell 6b7b69a048 RC_Channel: added secondary rudder support 
this is used when nose wheel steering needs different reverse/range
from rudder
 2013-06-29 17:31:03 +10:00
Randy Mackay b16ce5e523 AVR I2C: bug fix 
Fix provided by both Jason Short and lucafedechen independently
 2013-06-28 07:09:05 -10:00
phokur b00e5d95c9 Update AnalogIn.cpp 
Fixed AnalogIn.cpp:42: undefined references

Full error msgs:
/cygdrive/c/MAVPRO~1/ardupilot/libraries/AP_HAL_Empty/AnalogIn.cpp:42: undefined reference to `Empty::EmptyAnalogSource::set_stop_pin(unsigned char)'
/cygdrive/c/MAVPRO~1/ardupilot/libraries/AP_HAL_Empty/AnalogIn.cpp:42: undefined reference to `Empty::EmptyAnalogSource::set_settle_time(unsigned short)'
 2013-06-26 23:22:08 -10:00
Craig@3DR 1a3ed2d80b AP_Compass: Corrected COMPASS_ORIENT Parameter Description 2013-06-26 19:14:24 -07:00
Randy Mackay 6cd18868c2 AirSpeed: fix example sketch compile error 2013-06-25 22:45:30 +09:00
Randy Mackay 20ed00dcc9 AP_InertialSensor: relax accel offset sanity check 2013-06-25 14:19:42 +09:00
Andrew Tridgell 7d42a0562d AP_AHRS: cope better with large GPS yaw changes 
this should cope better with bungee launches when using only GPS for
yaw.
 2013-06-25 12:44:26 +10:00
Andrew Tridgell 169b5a30a5 AP_Camera: added CAM_TRIGG_DIST parameter 
for triggering every N meters of GPS distance travelled
 2013-06-25 12:44:26 +10:00
Andrew Tridgell 7902d57877 AP_Relay: added RELAY_PIN parameter 
makes it easier to choose a pin
 2013-06-24 22:39:18 +10:00
Paul Riseborough 2204b30e66 Plane: Added APM_Control integrator limits to table used to covert old PID values 2013-06-22 21:59:47 +10:00
Paul Riseborough 147856e73c APM_Control: Added integrator limiting adjustable by an advanced user parameter 
this is compatible with the old IMAX settings
 2013-06-22 21:55:27 +10:00
Paul Riseborough d8dab7b5c7 APM_Control: Pitch Control - Reduced the speed below which the integrator is locked 
This is to allow for slow speed flare manoeuvres in FBW modes
 2013-06-22 21:49:40 +10:00
Randy Mackay aa2b10f044 AP_Baro: TEMP parameter comment fix 2013-06-18 11:28:36 +09:00
Randy Mackay dde19c9585 WPNav: add acceleration parameter 
WP_ACCEL added to allow user control of acceleration during missions.
Loiter acceleration made to be half of loiter max speed
 2013-06-16 11:40:51 +09:00
Randy Mackay 272f0e5032 Copter: reduce twitch when entering CIRCLE mode 
Set loiter target and prev iterations velocity when circle mode is
started
Start circling from projected stopping point
 2013-06-15 18:18:30 +09:00
Andrew Tridgell d7d87f827e HAL_PX4: support voltage monitoring on multi-connector pin 5 2013-06-05 08:24:20 +10:00
Paul Riseborough 3ad35363be Plane : APM_Control : Removed scaler incorrectly applied to the integrator path 2013-06-04 18:09:06 +10:00
Andrew Tridgell f44f7308e8 AP_Param: we don't need to avoid writes in AP_Param now 
now handled in the HAL
 2013-06-04 14:02:49 +10:00
Andrew Tridgell 2316c3bd11 AP_HAL: make storage->write_block() take a const pointer 2013-06-04 14:02:13 +10:00
Andrew Tridgell 3c9d45d7d0 HAL_AVR: avoid writing bytes to EEPROM that are already correct 
this speeds up writing of waypoint data, reducing latency
 2013-06-04 13:33:41 +10:00
Andrew Tridgell 02252b5387 RC_Channel: removed reference to dip switches 2013-06-03 17:49:56 +10:00
Andrew Tridgell aaaa5247e3 AP_AHRS: make it possible to setup board orientation at runtime 2013-06-03 16:52:28 +10:00
Andrew Tridgell 45b385cf81 AP_RCMapper: improved docs for RCMAP_* 2013-06-03 16:28:05 +10:00
Andrew Tridgell c0058bbb03 RC_Channel: added output_trim() and read() functions 
these make using rcmap in the plane code easier
 2013-06-03 16:23:48 +10:00
Andrew Tridgell 033828aeb6 AP_Mount: make the code a bit easier to read 2013-06-03 16:23:48 +10:00
Andrew Tridgell 9076f6a1d0 AP_Mount: use RC_Channel::rc_channel() instead of rc_ch[] 2013-06-03 16:23:47 +10:00
Andrew Tridgell 0438952a8b RC_Channel: removed global rc_ch[] array 
hide it as a object static instead
 2013-06-03 16:23:47 +10:00
Randy Mackay e9594c8b80 RCMapper: simple mapping object for primary input channels 
allows arbitrary mapping of first 4 channels
 2013-06-03 16:23:47 +10:00
Andrew Tridgell 68adeb041d AP_Airspeed: support ARSPD_PIN option for choosing source 
this gives us support for arbitrary analog pins for the airspeed
sensor, plus support for the EagleTree airspeed driver on PX4
 2013-06-03 11:51:09 +10:00
Andrew Tridgell 26b7de668a AP_Param: fixed parameter save bug 
This bug affected parameters where the defaults are overridden in the
object constructor. For example, a PID object may have a default value
for PID_D of 0.0, but have a constructor based default of 0.2. If the
user tries to set the value to exactly 0.0, then the set wouldn't happen,
as the value matches the value in the object default var_info[]
table. 

This change ensures we force a save to eeprom if the value is changing
from the current value, regardless of the var_info[] default.

Thanks to Tom Coyle for finding this bug!
 2013-06-02 14:49:34 +10:00
Andrew Tridgell 05889391e5 APM_Control: cope with zero integrator or tconst 
if the user zeros the integrator tuning factor, we need to zero the
integrator
 2013-06-01 22:29:38 +10:00
Andrew Tridgell 512d3d811d APM_Control: neaten up code formatting 2013-06-01 22:29:38 +10:00
Randy Mackay 7a2afb7443 Copter Nav: add accessor for waypoint speed 2013-06-01 18:21:29 +09:00
Randy Mackay 8b87849acd Math: add wrap_PI 2013-06-01 18:21:29 +09:00
Andrew Tridgell c82caeeba1 HAL_AVR: configure analog inputs as INPUT without pullup 
not all pins were defaulting to this, which led to some strange
readings on some devices. First noticed by Andi on a LM335 temperature
sensor
 2013-06-01 12:19:02 +10:00