murata
64c60c8149
AP_HAL_SITL: Accurate 10 counts
2022-09-16 08:53:16 +10:00
Peter Barker
fb3a7d0d10
AP_HAL_SITL: do not return from reboot command
...
This structure was set up to mimic the should_exit code originally from the Linux HAL. It runs contrary to the intent of the HAL reboot call, which is not expected to return. This oddity leads us to emit wo acks sequentially, one success, one failure, which is just weird.
2022-09-14 21:23:18 +10:00
Andrew Tridgell
53997a284b
AP_HAL_SITL: fixes from --ubsan autotest
2022-09-06 10:49:50 +10:00
Jeffrey Laut
3133aff352
SITL: fix simulated RC failure while receiving RC overrides
2022-09-02 12:08:34 +10:00
Peter Barker
1c7e2f5094
AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
...
If SITL is not receiving any sitl rc input (so _sitl_rc_in.recv(...) is allways returns -1 then the bind-values code would never be crossed so the RC input values would remain at their initialisation values rather than honouring the SIM_RC_FAIL setting which says they should go to bind values (notably throttle-to-950)
2022-08-10 17:14:21 +10:00
Henry Wurzburg
e682296b58
AP_HAL_SITL: add TeraRange Neo Rangefinder
2022-08-09 09:01:34 +10:00
bugobliterator
8e81ee0292
AP_HAL_SITL: add support for starting node in maintenance mode
2022-07-27 18:18:03 +10:00
Andrew Tridgell
9b0c8674d6
HAL_SITL: catch ubsan errors into a log file
2022-07-12 11:00:08 +10:00
Andrew Tridgell
f55aadfedf
HAL_SITL: fixed undefined behaviour in GPIO
2022-07-12 11:00:08 +10:00
Andy Piper
061ddf7a3f
AP_HAL_SITL: save a sliding window of frequency bins
2022-06-01 15:49:32 +01:00
Iampete1
031115577a
AP_HAL_SITL: enable 32 servo outs
2022-05-22 12:07:37 +10:00
Clyde McQueen
25fd69b947
AP_HAL_SITL: init ArduSub pwm_output to [1500, ...]
...
Signed-off-by: Clyde McQueen <clyde@mcqueen.net>
2022-05-19 07:53:52 +10:00
Andrew Tridgell
7dc5da1247
HAL_SITL: cleanup SITL airspeed handling
...
fixed handling of EAS2TAS, and fixed ratio per sensor.
Removed the wind delay code (which was never being used). We should
add a generic delay filter if we need this again
2022-05-17 19:34:32 +10:00
Andrew Tridgell
a6cd7ffd20
HAL_SITL: fixed warning
2022-05-06 06:55:16 +10:00
Andy Piper
3199412bff
AP_HAL_SITL: add vector addition function
2022-05-04 17:05:51 +10:00
Andy Piper
63229d7eca
AP_HAL_SITL: correct disable channel maths
...
unilaterally write rcoutput to appease the sitl gods
2022-03-29 10:29:31 +11:00
Andrew Tridgell
f8aa4623ef
HAL_SITL: don't use terrain adjustment
2022-03-28 16:01:21 +11:00
bugobliterator
bd2bf7fedc
AP_HAL_SITL: add support for CANFD in SITL
2022-03-27 06:07:34 -07:00
Andrew Tridgell
535d7f0d85
AP_HAL_SITL: removed terrain home correction
2022-03-10 07:34:20 +11:00
Andrew Tridgell
5eb8b8d72e
HAL_SITL: support mavcan message forwarding
2022-02-12 16:36:05 +11:00
Andrew Tridgell
9fd25907e2
HAL_SITL: fixed mapping of --serial ports in SITL
...
uart paths are still in uartABCD order
2022-01-21 10:07:55 +11:00
Peter Barker
ee341bc4eb
SITL: add compilation option AP_SIM_CRSF_ENABLED
2022-01-15 21:56:33 +11:00
Peter Barker
08b8d3ad34
AP_HAL_SITL: correct compilation when SIM options disabled
...
AP_HAL_SITL: use AP_ASIM_GIMBAL_ENABLED
AP_HAL_SITL: use AP_SIM_ADSB_ENABLED
AP_HAL_SITL: use AP_SIM_RPLIDARA2_ENABLED
AP_HAL_SITL: use AP_SIM_PS_LIGHTWARE_SF45B_ENABLED
AP_HAL_SITL: use AP_SIM_PS_TERRARANGERTOWER_ENABLED
AP_HAL_SITL: use AP_SIM_AIS_ENABLED
AP_HAL_SITL: use AP_SIM_JSON_MASTER_ENABLED
2022-01-15 17:37:24 +11:00
Pierre Kancir
6584fef711
AP_HAL_SITL: catch more signal for correct exit
...
SIGINT is for ctrl-c
SIGHUP and SIGQUIT are use within term. If the term close before SITL, it will trigger one of those and then exit cleanly anyway
2022-01-12 12:31:56 +11:00
Shiv Tyagi
af950e266b
AP_HAL_SITL: add dataflash to spi device table
...
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it
Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Andy Piper
fa91e74fde
AP_HAL_SITL: remove redundant harmonics from DSP
2021-12-22 18:13:38 +11:00
Peter Barker
fbe46f400f
AP_HAL_SITL: stop passing home_str to _sitl_setup
...
This is poked into the model now
2021-12-13 09:30:33 +11:00
Peter Barker
2f77fef10e
AP_HAL_SITL: permit float-equal while we do comparison vs INFINITY
2021-12-13 08:38:17 +11:00
Peter Barker
acbe567202
AP_HAL_SITL: consolidate rangefinder range calculations
2021-12-11 20:10:10 +11:00
Peter Barker
6e8c7c6b03
AP_HAL_SITL: remove unused mag-data delay buffer state variables
...
This delay buffer code is now in AP_Compass_SITL
2021-12-07 16:41:11 +11:00
Peter Barker
cce14d8461
AP_HAL_SITL: remove unused _home_str member
2021-12-07 09:36:22 +11:00
Peter Barker
8cc7f51de1
AP_HAL_SITL: tidy set/get of hw RTC
2021-12-06 12:58:43 +11:00
Peter Barker
11cbd68296
AP_HAL_SITL: remove incorrect use of ARRAY_SIZE
...
This was converted to a linked list....
2021-11-24 18:26:17 +11:00
Peter Barker
cdccc67fb8
AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice
2021-11-23 11:09:29 +11:00
Andrew Tridgell
3b3abdeef0
AP_HAL_SITL: support up to 9 UARTs
2021-11-22 22:48:59 +11:00
Peter Barker
eb6da9512f
AP_HAL_SITL: quieten i2c-device-creation diagnostics
2021-11-12 10:17:28 +11:00
bugobliterator
09096cb355
AP_HAL_SITL: add get_storage_ptr method
2021-11-10 17:21:35 +11:00
Peter Barker
9ebd0cdeed
AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication
2021-11-06 16:54:07 +11:00
Peter Barker
02dc42275c
AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing
2021-10-28 09:09:44 +11:00
Andrew Tridgell
8192661042
AP_HAL_SITL: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Peter Barker
cf9bbb570c
AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
...
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Peter Barker
1ab8a3e3aa
AP_HAL_SITL: make simulated GPS work as a SerialDevice
2021-10-21 12:09:21 +11:00
Peter Barker
99e80549b1
SITL: move sitl_gps.cpp to SIM_GPS.cpp
2021-10-21 12:09:21 +11:00
Stephen Dade
1356beb14d
AP_HAL_SITL: Add instance to ADSB simulation
2021-10-20 20:21:33 +11:00
Peter Barker
21030c4e83
AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz
2021-10-20 19:07:17 +11:00
Peter Barker
8c9ade3f7f
AP_HAL_SITL: move simulated megasquirt to SerialDevice framework
2021-10-17 10:00:08 +11:00
Asa Davis
85fbbe0704
SITL: add simulator for LORD Microstrain serial EAHRS
2021-10-17 08:55:03 +11:00
Peter Barker
f5d5387358
AP_HAL_SITL: remove unused ext_fifo_fd member variable
2021-10-12 20:07:19 +11:00
Peter Barker
67226433e3
AP_HAL_SITL: add simulated RAMTRON device
2021-10-12 20:01:49 +11:00
Peter Barker
58a7f022fd
AP_HAL_SITL: add simulated SPI devices
2021-10-12 20:01:49 +11:00