Jason Short
|
50dcbe6549
|
Copter: Drift throttle assist range increased
Throttle assist is applied from 213 ~ 787
Deadband and constraint added
|
2014-03-31 13:09:57 +09:00 |
Jason Short
|
bccf1de563
|
Copter: add drift throttle assist
|
2014-03-31 13:09:54 +09:00 |
Andrew Tridgell
|
f4f04ead68
|
Rover: added BRAKING_PERCENT parameter
this allows for reverse throttle to be applied for braking in corners
|
2014-03-31 08:44:19 +11:00 |
Andrew Tridgell
|
31082f4ce2
|
AP_Mission: fixed a bug re-entering AUTO
this fixes a bug found by Marco where we would continue in CRUISE mode
with no waypoint if we re-entered AUTO after a mission reset
|
2014-03-31 06:18:07 +11:00 |
Randy Mackay
|
93f8d53d1b
|
Mission: make get_prev_nav_cmd_index const
|
2014-03-30 23:09:54 +09:00 |
Randy Mackay
|
b15d4379d8
|
AC_WPNav: use atan2f, make methods const
|
2014-03-30 23:09:51 +09:00 |
Randy Mackay
|
3ad635feeb
|
AC_AttControl: 45deg/sec yaw rate for Auto, RTL
|
2014-03-30 15:44:14 +09:00 |
Randy Mackay
|
d27ca53a9d
|
AC_WPNav: spline sets origin vel to zero when no prev segment
Issue caught by Michael Oborne
|
2014-03-30 15:19:18 +09:00 |
Randy Mackay
|
7dfde39e19
|
AC_WPNav: advance_spline to use dt
|
2014-03-30 15:02:07 +09:00 |
Randy Mackay
|
c0458b786a
|
AC_WPNav: check acceleration is non zero
|
2014-03-30 11:52:44 +09:00 |
Randy Mackay
|
f0f3688172
|
AC_WPNav: rounder corners for short spline segments
|
2014-03-30 11:52:41 +09:00 |
priseborough
|
9c5f564dc5
|
AP_NavEKF : Fixes bug in initial earth magnetic field states
The calculation for these states was not being bias corrected
|
2014-03-30 07:43:52 +11:00 |
Randy Mackay
|
7bff8e9312
|
AC_AttControl: constrain earth frame yaw angle error
This temporarily resolves the wobble we see in Auto when the target
heading is suddenly changed leading to a large yaw angle error
|
2014-03-29 20:42:21 +09:00 |
Randy Mackay
|
197683d539
|
WPNav: clean up spline comments
|
2014-03-29 17:57:47 +09:00 |
Randy Mackay
|
7d5d0d12a2
|
Copter: spline bug fixes
Next waypoint's location must be passed in even if it's a straight
segment.
mission.get_next_nav_cmd's start_index should be the current command +1
|
2014-03-29 17:57:45 +09:00 |
priseborough
|
e1819bb53a
|
AP_NavEKF : Add initial parameter defaults for Copter, Rover and Plane
|
2014-03-29 14:06:43 +11:00 |
Andrew Tridgell
|
14671d0bcd
|
Plane: fixed previous_mode error in geofence
when we were in MANUAL we would switch back to STABILIZE
|
2014-03-29 13:53:19 +11:00 |
NosDE
|
613fda4889
|
PX4: enabling mkblctrl for fmuv1/fmuv2
See the comments in mk/PX4/ROMFS/init.d/rc.APM for details
|
2014-03-29 06:45:30 +11:00 |
Randy Mackay
|
ac364c93dd
|
Copter: bug fix for simple_mode when run at 400hz
Mark radio frame as consumed so that simple mode does not apply the yaw
correction more than once when run at very high rates (like 400hz on
Pixhawk)
|
2014-03-28 17:03:31 +09:00 |
Randy Mackay
|
176a450ad2
|
Copter: remove spline handling from regular wp_nav
|
2014-03-28 09:23:41 +09:00 |
Randy Mackay
|
4f68b8ea7f
|
AutoTest: update copter_spline mission
|
2014-03-28 09:23:38 +09:00 |
Randy Mackay
|
d541fefab4
|
Copter: add do_spline_wp and verify_spline_wp functions
|
2014-03-28 09:23:33 +09:00 |
Randy Mackay
|
ac339a0289
|
Mission: add decoding of NAV_SPLINE command
|
2014-03-28 09:23:30 +09:00 |
Randy Mackay
|
e7be622eef
|
GCS_MAVLink: generate after adding NAV_SPLINE cmd
|
2014-03-28 09:23:28 +09:00 |
Randy Mackay
|
519d5fc444
|
GCS_MAVLink: add MAV_CMD_NAV_SPLINE_WAYPOINT cmd
This is the same as a NAV_WAYPOINT except that the vehicle flies a
spline curved path to the destination
|
2014-03-28 09:23:23 +09:00 |
Randy Mackay
|
8f946a3a8c
|
Copter: remove original_wp_bearing
To-Do: extend wpnav yaw control to only repoint nose towards waypoint if
it is more than 5m or 10m away
|
2014-03-28 09:23:21 +09:00 |
Randy Mackay
|
392162747a
|
Copter; integrate WPNAV's get_yaw
|
2014-03-28 09:23:17 +09:00 |
Randy Mackay
|
24eb195aa3
|
WPNav: add yaw control for straight line wp nav
|
2014-03-28 09:23:13 +09:00 |
Randy Mackay
|
3753550a72
|
Copter: integrate get_spline_yaw
|
2014-03-28 09:23:11 +09:00 |
Randy Mackay
|
b42b12f7be
|
AC_WPNav: add get_spline_yaw
|
2014-03-28 09:23:07 +09:00 |
Randy Mackay
|
2ce827d2ae
|
AutoTest: add copters spline test
|
2014-03-28 09:23:05 +09:00 |
Randy Mackay
|
c0f12911ec
|
Copter: minor format change
|
2014-03-28 09:23:02 +09:00 |
Randy Mackay
|
0822adfb34
|
Copter: integrate spline navigation
|
2014-03-28 09:22:59 +09:00 |
Randy Mackay
|
f2d9ad41aa
|
Mission: minor comment update
|
2014-03-28 09:22:56 +09:00 |
Randy Mackay
|
e5e71ce371
|
WPNav: add spline support
|
2014-03-28 09:22:53 +09:00 |
Andrew Tridgell
|
bcbdb15c7d
|
Plane: changed version to 2.79beta1
|
2014-03-28 09:47:59 +11:00 |
Mike McCauley
|
ffcac91120
|
AntennaTracker: update_GPS now sets HOME position and compass.set_initial_location on first good GPS fix
|
2014-03-27 13:01:57 +11:00 |
Mike McCauley
|
7116fdecde
|
AntennaTracker: added documentation about compass calibration to AntennaTracker.txt
|
2014-03-27 13:01:57 +11:00 |
Mike McCauley
|
2e3989f78d
|
AntennaTracker: initial position was not being set on normal startup
|
2014-03-27 13:01:57 +11:00 |
Mike McCauley
|
6648170102
|
AntennaTracker: remove call to set fly forward, else if the tracker is moving it will use the GPS direction for yaw instead of the compass
|
2014-03-27 13:01:57 +11:00 |
Mike McCauley
|
cc21f68ed4
|
AntennaTracker: minor cleanups in tracker.pde
|
2014-03-27 13:01:56 +11:00 |
Mike McCauley
|
25c46cdc00
|
AntennaTracker: Added supportfor manual control message to force antenna bearing and pitch in manual mode
|
2014-03-27 13:01:56 +11:00 |
Andrew Tridgell
|
61ebf365d9
|
Plane: fixed reverting modes when FENCE_SET_RALLY is enabled
we need to keep the guided destination we are using
|
2014-03-27 10:41:24 +11:00 |
Andrew Tridgell
|
8639676eb3
|
Plane: we need 5 points for a valid geofence
the first and last points need to be the same for it to be a closed
polygon
|
2014-03-27 10:40:00 +11:00 |
Michael Day
|
268b1e85a1
|
Plane: Changes needed prior to merging with master identified by Tridge.
|
2014-03-27 09:26:20 +11:00 |
Michael Day
|
f921d4fbac
|
Plane: FENCE_RET_RALLY param. Plane returns to rally point on breach.
|
2014-03-27 09:26:20 +11:00 |
Michael Day
|
25f23cf16c
|
Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence.
|
2014-03-27 09:26:20 +11:00 |
Michael Day
|
e1d193f539
|
GCS_MAVLink: Generated code from message additions for autofence.
|
2014-03-27 09:26:20 +11:00 |
Michael Day
|
c5ebd120f1
|
GCS_MAVLink: XML for MAV_CMD_DO_FENCE_ENABLE and MAV_SYS_STATUS_GEOFENCE
|
2014-03-27 09:26:20 +11:00 |
Andrew Tridgell
|
72c12fb2b3
|
AntennaTracker: added boardconfig object
this allows the safety switch to be disabled
|
2014-03-27 08:06:50 +11:00 |