Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
17,835 Commits 70 Branches 507 Tags 659 MiB
Commit Graph

164 Commits

Author SHA1 Message Date
Andrew Tridgell 49f7adcc80 Plane: re-enable geofencing on APM2 
it only just fits ...
 2015-07-30 11:04:31 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define 
disable HIL support on APM2 to save flash space
 2015-07-30 11:04:31 +10:00
Andrew Tridgell 248bf8c5a3 Plane: disable geofence on APM2 2015-06-20 14:52:42 +10:00
Andrew Tridgell 554869033f Plane: disabled rangefinder on APM2 
this saves 5k of flash space, enough for support to be kept for
another release
 2015-05-21 07:48:53 +10:00
Andrew Tridgell c65f5a1bda Plane: disable camera mount support on APM2 
this makes the firmware small enough to squeeze onto an APM2 again
 2015-04-30 11:57:20 +10:00
Tom Pittenger bd9b573969 Plane: Fix compile warnings 
- const values declared as default double
- This is the first pass in fixing the warnings, trying to catch some low hanging fruit. All const double values are changed to float. For example: 1.0 is now 1.0f.
- Only except is in location.pde where some double stuff is happening
- I did not change the exponentials 1e7 type stuff which should be 1e7f. A different commit
 2015-04-24 12:20:53 +09:00
Andrew Tridgell b0cdf8952b Plane: added HIL_MODE parameter 
this allows for HIL with any firmware
 2015-03-13 22:52:56 +11:00
Víctor Mayoral Vilches 4ae3bf5399 Plane: Update compass to the new interface 2015-03-13 18:46:17 +11:00
Randy Mackay 3a1465c9d1 Plane: integrate SerialManager 
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
 2015-01-29 14:05:15 +11:00
Randy Mackay 681d28838f Plane: integrate mount frontend-backend restructure 
initialise mount on startup
use mount.has_pan_control method
remove calls to unimplemented mount.configure_cmd
remove call to update_mount_type which is now handled by mount lib
 2015-01-29 13:57:18 +11:00
Dario Lindo Andres 7f5243026d Plane: Cleanup code to remove 1280 ifdefs 
Due to the imposibility to fit actual code on Legacies 1280 chips, some
cleanup is needed.
 2015-01-22 16:12:26 +11:00
Andrew Tridgell a2242305c7 Plane: use common send_opticalflow() 2015-01-03 15:53:35 +11:00
Andrew Tridgell 8708297341 Plane: update for new OptFlow API 2015-01-03 14:16:33 +11:00
priseborough 898ad7432b Plane : Only build optical flow with PX4 board 
Fixes SITL compile errors
 2014-12-06 18:16:48 +11:00
priseborough 2500f7e9c2 Plane : Add data logging for optical flow use with EKF 2014-12-06 18:16:48 +11:00
Andrew Tridgell 7f383facac Plane: re-enable CLI on non-APM1/APM2 boards 2014-12-03 20:14:26 +11:00
Andrew Tridgell 913004beb0 Plane: added OVERRIDE_CHAN parameter 
this allows both for testing PX4IO override on the ground, and for
forced manual override while flying, including re-arming after in-air
reboot
 2014-11-07 10:39:07 +11:00
Andrew Tridgell 240e87dc2c Plane: update for new AP_InertialSensor API 2014-10-24 12:10:38 +11:00
Andrew Tridgell 2fc69c7c4c Plane: disable CLI by default 
it really isn't needed any more, and saves 20k of flash on APM2
 2014-10-22 18:27:08 +11:00
Andrew Tridgell 1fa03a49c9 Plane: disable the CLI if AFS failsafe enabled on APM2 
the flash space is a bit too low for both CLI and AFS
 2014-09-24 12:02:38 +10:00
Andrew Tridgell 21ed86004a Plane: raise the default WP radius 
with L1 a large radius doesn't mean it turns too early
 2014-08-30 07:43:11 +10:00
Andrew Tridgell 4f57467aa5 Plane: build AFS (formerly known as OBC) failsafe on Pixhawk 
this gives an advanced failsafe system which may be useful for other
than OBC use
 2014-08-08 13:48:03 +10:00
Matthias Badaire 57253fc2ee Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry 
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
 2014-07-29 17:08:20 -07:00
Andrew Tridgell ae29a24348 Plane: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell f6bba74fb6 Plane: enable MPU9250 for Linux build 2014-07-14 09:44:34 +10:00
Víctor Mayoral Vilches fc57bdedde ArduPlane/config.h: Add the PXF hardware setup 2014-07-14 09:31:41 +10:00
Emile Castelnuovo a111d174c1 Plane: added VRBRAIN #defines and #includes 2014-04-08 16:19:20 +10:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Andrew Tridgell e3952112ad Plane: raise default LIM_PITCH_MAX to 20 degrees 
15 is often not enough to climb
 2014-03-03 15:49:04 +11:00
Andrew Tridgell 6b9e1edf38 Plane: disable GPS2 in HIL 2014-02-27 08:16:28 +11:00
Andrew Tridgell 07826096a2 Plane: support a 2nd GPS 2014-02-26 09:24:23 +11:00
Andrew Tridgell d9cb101a03 Plane: default LOG_BITMASK to 32767 on non-APM 2013-12-31 10:28:38 +11:00
Andrew Tridgell ce773f085a Plane: make the defaut for FS_GCS_ENABL clearer 2013-12-20 11:44:44 +11:00
Andrew Tridgell 8383abc1fe Plane: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD 2013-11-26 13:00:03 +11:00
Andrew Tridgell a05a32dbda Plane: added RCIN and SRVO logging 2013-11-26 09:04:43 +11:00
Andrew Tridgell 7e10811673 Plane: send firmware and git version in tlog 2013-11-09 10:09:20 +11:00
Andrew Tridgell 5e1f5ffb7f Plane: removed some old defines 2013-10-14 14:40:30 +11:00
Andrew Tridgell e6af7dad3d Plane: switched to L3G4200D driver for Linux 2013-10-08 11:50:54 +11:00
Randy Mackay c64d444b5a Plane: integrate BattMonitor 2013-10-03 11:16:08 +09:00
Andrew Tridgell 444d053dc2 Plane: enable Oilpan and BMP085 on Linux 2013-09-29 01:02:05 +10:00
Andrew Tridgell 287db19119 Plane: updates for Stub -> HIL 2013-09-28 22:04:15 +10:00
Andrew Tridgell c3d0b315cf Plane: added HAL_LINUX includes 2013-09-28 21:24:02 +10:00
Mike McCauley 18c6b00b5b Plane: Added definitions for Flymaple 2013-09-24 13:51:28 +10:00
Andrew Tridgell 21a4da0d29 Plane: removed flash_leds() calls 2013-09-19 18:38:28 +10:00
Andrew Tridgell 4bd6b2f428 Plane: use new usb_connected() function 2013-09-19 16:23:58 +10:00
Andrew Tridgell b16e3e4c85 Plane: changed FBW min to 9 m/s 
6 m/s is too dangerous for widely used planes
 2013-08-18 11:42:23 +10:00
Andrew Tridgell 5cfdf52381 Plane: change default modes to FBWA not STABILIZE 2013-08-13 13:42:27 +10:00
Andrew Tridgell c083c15240 Plane: use a larger serial buffer 
this makes higher rate MAVLink possible again
 2013-08-02 18:46:54 +10:00
Andrew Tridgell b8fa83ff54 Plane: change default slewrate to 100%/second 2013-07-22 12:50:02 +10:00
Andrew Tridgell c8a83e17d0 Plane: remove old AIR_START code 
this was never used or tested
 2013-07-22 12:50:01 +10:00