Andrew Tridgell
16fd113020
RC_Channel: added channel_function()
...
this is used in the plane mixing code
2014-11-07 10:39:07 +11:00
Andrew Tridgell
913004beb0
Plane: added OVERRIDE_CHAN parameter
...
this allows both for testing PX4IO override on the ground, and for
forced manual override while flying, including re-arming after in-air
reboot
2014-11-07 10:39:07 +11:00
Andrew Tridgell
ad58822cb5
Plane: removed impossible boolean check
2014-10-24 22:04:05 +11:00
Andrew Tridgell
959cd11cb1
Plane: save a byte in auto_state
...
keep single bits together to save space on APM2
2014-10-24 22:03:34 +11:00
Michael Day
01f611daa9
Plane: "Go around" operation. Assumes go around behavior follows land wp.
2014-10-24 21:51:46 +11:00
Michael Day
c1b949a74f
Plane: Bugfix. Changing to landing sequence now works at mission end.
2014-10-24 21:42:06 +11:00
Andrew Tridgell
240e87dc2c
Plane: update for new AP_InertialSensor API
2014-10-24 12:10:38 +11:00
Andrew Tridgell
05c325a12a
Plane: display min as well as max loop delta_t
2014-10-22 18:27:12 +11:00
Andrew Tridgell
f87da51b37
Plane: prevent calling jump_to_landing_sequence() too often
2014-10-20 08:36:20 +11:00
Andrew Tridgell
7ecc87a787
Plane: improved check for reaching RTL point for auto-land
2014-10-20 08:36:20 +11:00
Michael Day
be17bfd972
Plane: Added parameter RTL_AUTOLAND and implementation.
2014-10-20 08:36:20 +11:00
Andrew Tridgell
4c984d9331
Plane: start preparing for 3.1.2
2014-10-13 10:25:53 +11:00
Andrew Tridgell
71d786187e
Plane: make auto takeoff independent of compass
...
this solves a problem of poor initial yaw due to poor compass offsets
causing a takeoff to not be in the direction the plane is pointing. A
summed gyro is used until the GPS speed is above 5m/s for 2 seconds,
then the GPS heading corrected by the summed gyro error is used for L1
based navigation for the rest of the takeoff
2014-10-07 07:17:46 +11:00
Andrew Tridgell
4b01cee330
Plane: send heartbeat to AFS when calibrating sensors
2014-09-24 12:02:39 +10:00
Andrew Tridgell
7b4181dc14
Plane: prepare for 3.1.1 release
2014-09-12 11:07:26 +10:00
Andrew Tridgell
988662027e
Plane: moved LAND_PITCH_CD into TECS
2014-08-27 20:13:19 +10:00
Andrew Tridgell
186806c768
Plane: lowpass the rangefinder correction, not height
...
this should produce less lag as the rangefinder correction should be
changing much less
2014-08-27 18:25:17 +10:00
Andrew Tridgell
a6ee46086c
Plane: allow continued use of rangefinder data for 5s after loss of contact
...
this allows short outages to be ridden out
2014-08-27 17:14:19 +10:00
Andrew Tridgell
b6319a9d19
Plane: keep an estimate of the rangefinder altitude
...
only accept data when we have had 10 samples in a row in range at 50Hz
2014-08-27 17:14:19 +10:00
Andrew Tridgell
5f3ac159ba
Plane: start working towards 3.1.1
2014-08-27 17:14:19 +10:00
Andrew Tridgell
e880de67ed
Plane: prepare for 3.1.0 release
2014-08-26 06:20:37 +10:00
Andrew Tridgell
6e5344bc8d
Plane: prepare beta4
2014-08-25 22:20:52 +10:00
Andrew Tridgell
7649907ec2
Plane: run terrain.update() more often
...
this provides faster checking of mission waypoints
2014-08-25 14:55:40 +10:00
Andrew Tridgell
f2f730ba9b
Plane: added FBWA_TDRAG_CHAN parameter
...
this allows for testing taildragger takeoffs in FBWA mode
2014-08-24 19:39:51 +10:00
Andrew Tridgell
79fa22e4ad
Plane: use gcs_send_text_fmt() for SCHED_DEBUG timing
...
lets values be saved in mavlink logs
2014-08-19 10:08:17 +10:00
Andrew Tridgell
cf410f8d12
Plane: prepare for 3.1.0-beta3
2014-08-17 18:25:46 +10:00
Andrew Tridgell
1ce3d1d4a4
Plane: update for AFS API change
2014-08-17 18:07:50 +10:00
Andrew Tridgell
9fff67ec89
Plane: update for APM_OBC API change
2014-08-17 09:13:29 +10:00
Andrew Tridgell
dad95648a0
Plane: split landing code into landing.pde
...
this is in preparation for more complex landing code using the
rangefinder
2014-08-13 21:38:05 +10:00
Andrew Tridgell
7def71d43a
Plane: improved landing approach and flare
...
flare if we are within the specified time of landing either vertically
or horizontally
2014-08-13 21:38:05 +10:00
Andrew Tridgell
ce9b14f0c8
Plane: convert to using StorageManager
2014-08-13 18:46:44 +10:00
Andrew Tridgell
e6f5a31944
Plane: prepare for 3.1.0-beta2
2014-08-10 07:20:29 +10:00
Andrew Tridgell
5e997b20f6
Plane: move battery init to after parameter load
2014-08-09 22:50:14 +10:00
Andrew Tridgell
2b89d728f3
Plane: rename to 3.1.0-beta1
2014-08-07 14:14:54 +10:00
Andrew Tridgell
bfe7c47aea
Plane: prepare new beta
2014-08-07 13:28:29 +10:00
Andrew Tridgell
9184e47f84
Plane: added TERRAIN_LOOKAHD parameter
...
distance to look forward for terrain following
2014-08-07 09:31:03 +10:00
Andrew Tridgell
781abc7593
Plane: fix for changed AP_Terrain API
2014-08-06 17:59:19 +10:00
Andrew Tridgell
448b3f60e0
Plane: use dataflash logging for terrain
2014-08-06 17:59:19 +10:00
Andrew Tridgell
d54bb68270
Plane: prevent cross-track on some WP types
...
when finishing a takeoff or when a user forces a WP change don't do
any cross-tracking. This avoids a problem where the plane tries to
line up with a track completely unrelated to the track currently being
flown
2014-08-04 21:02:13 +10:00
Andrew Tridgell
09a679368b
Plane: use bitfields in auto_state
2014-08-04 21:02:13 +10:00
Andrew Tridgell
8610d9a8ea
Plane: added GLIDE_SLOPE_MIN parameter
...
this is used to prevent slow glide slopes being used for small
altitude changes in missions. This allows more accurate tracking of
altitude with terrain changes
2014-08-04 21:02:13 +10:00
Andrew Tridgell
b64ab07ca4
Plane: added STAB_PITCH_DN_CD parameter
...
this adds some down trim when at throttle levels below the trim
throttle in FBWA mode.
defaults to 200 centi-degrees. I may adjust based on flight tests
2014-08-03 17:17:20 +10:00
Matthias Badaire
57253fc2ee
Rover: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
...
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:20 -07:00
Andrew Tridgell
b158b7e5a9
Plane: replace HAVE_AP_TERRAIN with AP_TERRAIN_AVAILABLE
2014-07-25 07:59:54 +10:00
Andrew Tridgell
3e320d71ab
Plane: added TERRAIN_FOLLOW parameter
...
when enabled RTL, CRUISE and rally points will use terrain altitude
2014-07-24 21:50:19 +10:00
Andrew Tridgell
d18c00d6fc
Plane: split up altitude handling
...
this creates altitude.pde for altitude handling, getting ready to add
terrain following
2014-07-24 21:50:19 +10:00
Andrew Tridgell
32bfeed169
Plane: incorporate terrain mavlink calls
2014-07-24 21:45:47 +10:00
Andrew Tridgell
e725b2c77e
Plane: added terrain object
2014-07-24 21:45:46 +10:00
Andrew Tridgell
ae29a24348
Plane: use sensors from board subtypes
2014-07-14 09:44:35 +10:00
Andrew Tridgell
f6bba74fb6
Plane: enable MPU9250 for Linux build
2014-07-14 09:44:34 +10:00
