Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
64,150 Commits 71 Branches 509 Tags 772 MiB
Commit Graph

36590 Commits

Author SHA1 Message Date
Leonard Hall 2ab3d0b3b0 AC_AttitudeControl: Add Landed Gain Backoff 2024-07-25 09:50:35 +10:00
muramura 84ff78f5c6 AP_Notify: Perform common checks first 2024-07-25 09:50:03 +10:00
James O'Shannessy 66817e207f AP_InertialSensor: Check the gyro/accel id has not been previously registered 
If the Gyro/Accel ID is already in the registered list, do not try to add it again.

This stops an issue seen on a CubeOrangePlus BG3 where, during the very first boot after a parameter wipe, software incorrectly registers a fourth IMU.
The Fourth IMU is registered because the AUX IMU is the same DevID as the third ICM45686.
 2024-07-25 09:49:35 +10:00
Luca Pescante 028017e38e ArduCopter/RC_Channel: add option 219 
(Transmitter Tuning)
 2024-07-25 09:40:13 +10:00
bugobliterator 8a4b925c71 AP_HAL_ChibiOS: add support for PPP between CubeRed Primary and Secondary 2024-07-25 09:37:16 +10:00
bugobliterator 4909ad4e4f AP_Networking: add debug code for PPP 2024-07-25 09:37:16 +10:00
bugobliterator 993d694fbb AP_HAL_ChibiOS: allow setup for low noise clock mismatch tolerant UART line 2024-07-25 09:37:16 +10:00
bugobliterator 025077b6f4 AP_HAL_ChibiOS: add support for recording UART Rx errors 2024-07-25 09:37:16 +10:00
mduclehcm 25a406e633 AP_Mount: Conditionally define `serial_instance` to fix unused variable compile error 
- Wrapped the definition of `serial_instance` with preprocessor directives to ensure it is only defined when necessary.
- This resolves the compile error caused by the unused variable when no features requiring `serial_instance` are enabled.
 2024-07-25 09:35:46 +10:00
Paul Riseborough 4904c718a5 AP_NavEKF3: Fix yaw alignment bug 
When the  yaw is aligned to the GPS yaw, the recordYawResetsCompleted() function should be called the same as for any other yaw reset.
 2024-07-25 09:34:48 +10:00
rishabsingh3003 07b6c57173 AP_TemperatureSensor: Extend analog sensor backend to 5th order polynomial 2024-07-24 17:53:08 +10:00
rishabsingh3003 3ab3388752 AP_ESC_Telem: Add ifndef before defining ESC_TELEM_MAX_ESCS 2024-07-24 17:45:24 +10:00
Randy Mackay 2b64787099 AP_Mount: topotek spelling fix 2024-07-24 17:28:24 +10:00
Randy Mackay cfd1e98333 AP_Mount: topotek safely parses version 2024-07-24 17:28:24 +10:00
Randy Mackay 1b77751aef AP_SmartRTL: add point made public 2024-07-24 17:22:44 +10:00
Henry Wurzburg 76abc6850f Filter: add "source" to option 5 2024-07-24 17:20:30 +10:00
Randy Mackay a1579bc31e SITL: integrate SlungPayload 2024-07-24 17:09:06 +10:00
Randy Mackay 5c2b758f42 SITL: add SlungPayload 2024-07-24 17:09:06 +10:00
George Zogopoulos e170710de9 SITL: Glider improvements 
Fixed balloon going below ground.
Enabled glider torque logging.
 2024-07-24 17:03:48 +10:00
Peter Barker 478d26d69c AP_Notify: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN 2024-07-24 09:13:50 +10:00
Peter Barker a4577685a7 AP_HAL_ChibiOS: rename LED_1 pin define to AP_NOTIFY_GPIO_LED_1_PIN 2024-07-24 09:13:50 +10:00
Peter Barker cc190f537f AP_OSD: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Peter Barker 1afa801b19 AP_LTM_Telem: correct compilation with AP_RRSI_ENABLED false 
Co-authored-by: David Buzz <davidbuzz@gmail.com>
 2024-07-24 09:11:39 +10:00
Andy Piper ccfbfddf7e AC_Fence: address minor review comments 2024-07-24 08:24:06 +10:00
Andy Piper 55075961b2 AP_Mission: address minor review comments 2024-07-24 08:24:06 +10:00
Andrew Tridgell 68f2593089 AC_Fence: fixed FENCE_AUTOENABLE=2 
needs to auto-enable on takeoff complete
 2024-07-24 08:24:06 +10:00
Andy Piper 5bc3727145 AC_Fence: support FENCE_OPTIONS on copter 2024-07-24 08:24:06 +10:00
Andy Piper 29a320b310 AC_Avoidance: correctly set back away speed for minimum alt fences 2024-07-24 08:24:06 +10:00
Andy Piper 37e0923ec2 AP_Arming: allow precise wording of fence pre-arm messages 2024-07-24 08:24:06 +10:00
Andy Piper f0456f29dd AC_Fence: always disable Min Alt fence on landing 
allow precise pre-arm messages
 2024-07-24 08:24:06 +10:00
Andy Piper 255fac215f AP_Mission: generic fence handling in missions 2024-07-24 08:24:06 +10:00
Andy Piper 04dd7de1ed AC_Fence: disable fences for landing by suppressing in the fence check rather than using a state machine 
simplify takeoff auto-enablement
 2024-07-24 08:24:06 +10:00
Andy Piper d5c6f3fe06 AC_Fence: add reset_fence_floor_enable() and use it in plane when landing is aborted 2024-07-24 08:24:06 +10:00
Peter Barker a4c7819117 AC_Fence: clear breach of disabled fence 
skip breach checks if no fences
correct initialisation of _num_fences in the case of no fences in eeprom
 2024-07-24 08:24:06 +10:00
Andy Piper 3fabec4158 AP_Arming: ensure fence enablement on arming is inverted on disarming 2024-07-24 08:24:06 +10:00
Andy Piper 174d5f07bb AC_Fence: ensure fence enablement on arming is inverted on disarming 
correct detection of polyfence
 2024-07-24 08:24:06 +10:00
Andy Piper f0f8187c7f AC_Fence: add ability to auto-enable fence floor while doing fence checks 
control copter floor fence with autoenable
autoenable floor fence with a margin
check for manual recovery only after having checked the fences
make auto-disabling for minimum altitude fence an option
output message when fence floor auto-enabled
re-use fence floor auto-enable/disable from plane
auto-disable on landing
do not update enable parameter when controlling through mavlink
make sure get_enabled_fences() actually returns enabled fences.
make current fences enabled internal state rather than persistent
implement auto options correctly and on copter
add fence names utility
use ExpandingString for constructing fence names
correctly check whether fences are enabled or not and disable min alt for landing in all auto modes
add enable_configured() for use by mavlink and rc
add events for all fence types
make sure that auto fences are no longer candidates after manual updates
add fence debug
make sure rc switch is the ultimate authority on fences
reset auto mask when enabling or disabling fencing
ensure auto-enable on arming works as intended
simplify printing fence notices
reset autofences when auot-enablement is changed
 2024-07-24 08:24:06 +10:00
Andy Piper 370b0d7b9c AP_Logger: add events for all fence types 2024-07-24 08:24:06 +10:00
Andy Piper 0288e1e79c RC_Channel: use fence enable_configured() 2024-07-24 08:24:06 +10:00
Andy Piper d16615923d AP_Frsky_Telem: use fence enable_configured() 2024-07-24 08:24:06 +10:00
Andy Piper 0c6ea4790d AP_Common: fix initialization of ExpandingString so that it can be used on the stack 
zero out passed in buffers for ExpandingString
 2024-07-24 08:24:06 +10:00
Andy Piper 3dbcbe0026 AP_Arming: do not enable minimim altitude fence on arming 
call appropriate fence method for auto-enablement
 2024-07-24 08:24:06 +10:00
Andy Piper 8287d4f2d0 AC_Avoidance: take into account minimum altitude fence when calculating climb rate 2024-07-24 08:24:06 +10:00
Andy Piper 95b39f64e3 AP_Mission: add comment about new fence API 2024-07-24 08:24:06 +10:00
Andy Piper f73154349b GCS_MAVLink: use bitmask based enablement for fences 2024-07-24 08:24:06 +10:00
Bob Long 230269bed8 HAL_ChibiOS: add adjustable wdg timeout for hwdefs 
This allows the watchdog timeout to be adjusted in the hwdef.dat file,
so that critical nodes like ESCs can recover more quickly.
 2024-07-23 19:53:38 +10:00
Andrew Tridgell 03bdbea77c hwdef: enable relay support in MatekL431-DShot fw 
the PWM expansion boards can also be used for relay control, often
combined with PWM output
 2024-07-23 18:42:56 +10:00
Rhys Mainwaring 4354072d34 SITL: SIM_Rover: add simulation for omni3 mecanum rover 
Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
 2024-07-23 13:27:04 +10:00
James O'Shannessy ce0ae33c5b AP_HAL_ChibiOS: Capture the case where the persistent parameter is the newer format INSn_ACC_ID 
This fixes the handling of the newer INSn_* parameters when loading those stored in persistent memory.
 2024-07-23 12:06:18 +10:00
James O'Shannessy c771440ea4 AP_InertialSensor: Fix persistent storing of IMU Z Scale 
Fixes INSn_ACCSCAL_Z not being stored in persistent storage when bootloader is flashed.
 2024-07-23 11:59:49 +10:00