Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,367 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

4367 Commits

Author SHA1 Message Date
Andrew Tridgell 0c7e20fe90 autotest: show logs on timeout 2012-06-16 06:47:55 +10:00
Andrew Tridgell 860c88c786 autotest: try again to get paths right! 2012-06-15 18:44:00 +10:00
Wingspinner d9e6a1ece9 Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality 2012-06-15 08:40:14 +00:00
Wingspinner ceba24ff8f Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality 2012-06-15 08:38:52 +00:00
Andrew Tridgell f3a45bfb41 autotest: added --timeout option 
try to ensure we end up with a timeout display on the website
 2012-06-15 16:53:51 +10:00
Andrew Tridgell 5525180814 MAVLink: make usage of MAVLink defines more consistent 2012-06-15 16:27:11 +10:00
Andrew Tridgell 957d818eb7 test: it is no longer possible to build with MAVLink 0.9 
the Camera and Mount code make it impossible because of the incredibly
silly arduino cpp handling.
 2012-06-15 16:27:11 +10:00
Andrew Tridgell b32726e867 GPS: need pgmspace.h for _write_progstr_block() 2012-06-15 16:27:11 +10:00
Andrew Tridgell ae9883a8e2 GPS: fixed auto-config of UBlox setup with no UBX messages 
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
 2012-06-15 15:53:27 +10:00
Andrew Tridgell b7e807cd58 FastSerial: added tx_pending() method 
this allows the caller to wait for the tx buffer to drain
 2012-06-15 15:53:27 +10:00
Andrew Tridgell d4056213ad APM: parameter enums should not be conditionally compiled 2012-06-15 11:57:00 +10:00
Andrew Tridgell 3a9096aa41 APM: added longer comment on k_format_version 2012-06-15 11:55:09 +10:00
Michael Oborne 3b07f8c06a firmware build 2012-06-15 08:25:19 +08:00
Michael Oborne db2c255611 firmware build 2012-06-15 08:19:32 +08:00
rmackay9 6b16ca190f ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release 2012-06-15 00:42:59 +09:00
Jason Short e261c62e6b Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short 6dc1e02f76 Inertial Control 
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
 2012-06-13 22:34:45 -07:00
Andrew Tridgell 07b9fc2a5d sitl: fixed fgFDM path 2012-06-14 15:18:58 +10:00
Amilcar Lucas bd632e9d01 Let's keep the same format version until CAMERA is activated by default 2012-06-13 21:28:13 +02:00
Amilcar Lucas 2cebd44313 With CLI and MOUNT active, the linker says: region `text' overflowed by 3858 bytes 
So disable CLI when MOUNT is active. Sorry I did not detect it before, but the APM_Camera branch worked in a different way.
 2012-06-13 21:08:09 +02:00
Amilcar Lucas a12cb8fd9a Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Amilcar Lucas f7ef60565e Add "3 axis camera stabilization" and "point camera to 3D point" functionality 
Patch by Gregory Fletcher and reviewed by me
 2012-06-13 20:55:19 +02:00
Amilcar Lucas 0bc936ca08 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-06-13 20:45:04 +02:00
Amilcar Lucas e9226d6f0a Spellcheck 2012-06-13 20:44:35 +02:00
Jean-Louis Naudin ee0d776f31 APMrover 2.0a - improving obstacles detection and tuning 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-06-13 20:43:35 +02:00
rmackay9 3618ac62e0 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Jean-Louis Naudin c22462bfd3 APMrover v2.20 - use RangeFinder optical SharpGP2Y instead of ultrasonic sonar 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-06-13 08:29:32 +02:00
Jason Short ee78818f5a Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9 c9093a1609 ArduCopter: updated firmware version to 2.6 Epsilon 2012-06-12 23:22:57 +09:00
rmackay9 1b9ed1444e ArduCopter: updated standard loiter pids. 
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
 2012-06-12 20:56:31 +09:00
rmackay9 fca914b7cf AP_GPS_NMEA: fix from Roberto Navoni to improve NMEA accuracy 2012-06-12 20:27:50 +09:00
Jason Short 29bb39f580 Added CLI level command 2012-06-11 23:01:25 -07:00
Jason Short 8e570fa2d0 Cosmetic changes only. 2012-06-10 13:10:07 -07:00
Jason Short 1eb2d0e485 Added missing Manual_level config 2012-06-10 13:08:48 -07:00
Jason Short b03feabacc Added missing Manual Level initializer 2012-06-10 13:08:22 -07:00
Jason Short ebff84d41e Added Angel's name to contrib list 2012-06-10 12:38:22 -07:00
Andrew Tridgell 1ee0f6d8fa Rover: added APMrover2 to build_all.sh 
hopefully it will stay building
 2012-06-10 19:35:56 +10:00
Andrew Tridgell fb1a4a2f2b Rover: fixed the build for MAVLink 1.0 
I have no idea if it will actually work, but at least it builds
 2012-06-10 19:34:11 +10:00
Andrew Tridgell 8f1121c980 GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
Andrew Tridgell f9c5b135bc GPS: use the new nav_setting in a couple of the sample sketches 2012-06-10 16:35:13 +10:00
Andrew Tridgell 0542539fc9 GPS: add stub settings for nav_setting in the other GPS drivers 
only Ublox supports nav_setting so far
 2012-06-10 16:34:53 +10:00
Andrew Tridgell 926dfbc0e9 GPS: added auto-configuration of UBlox GPS 
the Ublox will now auto-configure for 5Hz with just the messages we
want. It also supports setting the navigation engine type
 2012-06-10 16:34:13 +10:00
Andrew Tridgell 04a71197f9 FastSerial: avoid buffer re-allocation on re-open if possible 
we commonly re-open serial ports a lot in the AUTO GPS driver
 2012-06-09 07:43:22 +10:00
rmackay9 df72f70aba ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release) 2012-06-08 21:54:09 +09:00
Andrew Tridgell c034a3a6f7 APM: ready for 2.40-beta 2012-06-08 18:03:21 +10:00
Andrew Tridgell f347572fc2 SITL: map() is a C++ function, so needs to be in C++ part of the header 
this fixes the ACM build
 2012-06-08 17:09:23 +10:00
Andrew Tridgell 9adaacedcd GPS: added debug code to the main GPS class 2012-06-08 16:42:03 +10:00
Andrew Tridgell f4718cafad GPS: re-open the serial port with a 256 byte serial receive buffer 
this ensures all GPS parsers have a 256 byte buffer available
 2012-06-08 16:42:03 +10:00
Andrew Tridgell bfb2c1ee87 GPS: open the GPS serial port with a 256 byte buffer 
the UBLOX needs more than 128 bytes for reliable parsing
 2012-06-08 16:42:03 +10:00
Andrew Tridgell ddebf7b443 GPS: fixed the UBLOX parser to handle unknown messages 
the parser was broken in several ways:

 1) when it received an unknown message it didn't update the ck_a and ck_b fields, so it
    thought the message had a bad checksum, which meant it got out of protocol sync

 2) the read() method would return false if the last message from the GPS was of an unknown type. 
    So we relied on the last msg always being one that we understand and want

 3) the parser considered any valid UBLOX message to be 'new data', whereas we only actually get 
    a new fix when we get box a new position and velned message

 4) the total message size per update is more than 128 bytes, but the serial port was opened 
    with only a 128 byte buffer, so we got corruption regularly
 2012-06-08 16:42:02 +10:00