Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
59,458 Commits 71 Branches 508 Tags 630 MiB
Commit Graph

66 Commits

Author SHA1 Message Date
Andy Piper c4cfc5dbe4 AP_IOMCU: fix eventing mask and some minor cleanups 2023-08-15 06:53:48 +10:00
Andy Piper d9f42236ad AP_IOMCU: support dshot600 on f103 2023-08-15 06:53:48 +10:00
Andy Piper af256f4b1b AP_IOMCU: output mcuid on f103 if able to 2023-08-15 06:53:48 +10:00
Andy Piper 9db5d0bf9b AP_IOMCU: reduce latency for oneshot 
correctly update outmode modes when requested
get ARM CPUID and display in startup banner
ensure correct rc input timing on 1Khz iofirmware
 2023-08-15 06:53:48 +10:00
Andy Piper 7b96f66413 AP_IOMCU: add support for getting output mode and mcuid 
give an appropriate MCUID on F103
 2023-08-15 06:53:48 +10:00
Andy Piper bb730e8e24 AP_IOMCU: inverted locking model 2 2023-08-15 06:53:48 +10:00
Andy Piper ec1edea1da AP_IOMCU: add support for shared DMA to iomcu-dshot 
new event-based update() loop for iomcu to allow for DMA channel sharing
spin event loop at 2Khz to give dshot thread ample access to DMA channels
correct transmission complete callbacks
ensure peripheral is re-enabled on DMA resumption
ensure DMA transactions do not get clobbered by locking
restructure callbacks for shared and non-shared DMA cases
ensure RC updates happen at 1Khz
increase expected delay at startup
 2023-08-15 06:53:48 +10:00
Andy Piper e6e0543b8a AP_IOMCU: propagate dshot rates through to IOMCU 
implement dshot ESC telemetry
add support for channel enablement/disablement
add stack checks and reporting for MSP stack
wait correct timeout in tickless mode
ensure that dshot sees all pwm updates as the occur in order to maintain periodicity
ensure dshot options are propagated on reset
implement dshot commands
ensure oneshot/125 and mode are setup correctly
add instrumentation for process stack
prevent illegal recursive locks
ignore requests for dshot 600
add support for soft reboot of iomcu
 2023-08-15 06:53:48 +10:00
bugobliterator ad428ac060 AP_IOMCU: add support for sending DShot function command 
add support for dshot on iomcu
add support for updating to dshot iofirmware
 2023-08-15 06:53:48 +10:00
Andrew Tridgell 2f1c38e13a AP_IOMCU: support forcing heater to enabled with a feature bit 2023-03-07 10:33:24 +11:00
Andrew Tridgell d921c427b1 AP_IOCMU: improved the safety button reset test code 
this allows testing of either watchdog or hard-fault reset
 2023-02-14 09:12:34 +11:00
Andrew Tridgell ce0b7a8957 AP_IOMCU: fixed handling of RC_OPTIONS bit to ignore RC failsafe bit 
this worked on FMU but not on IOMCU
 2022-03-22 10:30:35 +11:00
Iampete1 12d5fbbc86 AP_IOMCU: iofirmware: support digital write 2021-09-28 09:40:25 +10:00
Iampete1 cc03b2975c AP_IOMCU: iofirmware: remove saftey PWM 2021-09-14 09:23:02 +10:00
Andy Piper c26f49fb0a AP_IOMCU: ChibiOS 20.3.x build fix 2021-03-23 12:01:20 +11:00
Andrew Tridgell 017f005737 AP_IOMCU: pass supported RC protocols to IOMCU 2020-08-24 16:32:35 +10:00
Andrew Tridgell 258b8b71ea AP_IOMCU: use more efficient read API for rcin 2020-01-31 11:09:07 +11:00
Andrew Tridgell 63c199a600 AP_IOMCU: support RSSI from receiver 2020-01-02 09:52:57 +11:00
Andrew Tridgell 34f5b40919 AP_IOMCU: use crc32_small() in AP_IOMCU 
the slower speed is not noticible and this saves 1k ram
 2019-10-28 15:53:16 +11:00
Mirko Denecke 12c9e50aef AP_IOMCU: remove unnecessary tabs and whitespaces 2019-10-21 07:57:44 +11:00
Andrew Tridgell 7c3df18ea3 AP_IOMCU: change optimisation from -O3 to -O2 2019-09-28 08:57:26 +10:00
Andrew Tridgell 672d09c965 AP_IOMCU: use AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell 454717cf6f AP_IOMCU: cleanup IO protocol and add logging 
this cleans up the IOMCU protocol structures now we don't need to be
compatible with the old nuttx based protocol and adds logging of IOMCU
errors
 2019-08-17 17:36:41 +10:00
bugobliterator c07fe55b87 AP_IOMCU: remove autodetection of heater pin polarity, instead hardcode it 2019-07-25 17:05:41 +10:00
Andrew Tridgell 76a8d494c3 AP_IOMCU: dither heater pin to prevent 1Hz impact on mags 
with the simpler duty cycle code we see a 1Hz 25 mGauss cycle in the
internal mags
 2019-07-12 12:46:27 +10:00
Siddharth Purohit f23746053d AP_IOMCU_FW: autodetect active high/low on heater control pin 2019-06-08 14:31:01 +10:00
Andrew Tridgell d4c68da76e AP_IOMCU: added IOMCU time since boot to protocol 
and optional watchdog testing using safety switch
(compile time option)
 2019-04-28 07:45:33 +10:00
Andrew Tridgell 6181c66e5c AP_IOMCU: handle watchdog reset in IO firmware 2019-04-22 16:53:35 +10:00
Andrew Tridgell 480d33706c AP_IOMCU: fixed safety state on reboot 
fixes issue #11031
 2019-04-20 14:48:59 +10:00
Andrew Tridgell 69c4fb671e AP_IOMCU: optimisations to reduce ISR latency 
this speeds up the DMA ISR handlers to reduce the change of losing a
byte on RC input due to loss of an interrupt
 2018-11-27 09:38:18 +11:00
Andrew Tridgell 8e7695e5f0 AP_IOMCU: respond to override change more quickly 2018-11-07 07:35:45 +11:00
Andrew Tridgell 5771e0a90e AP_IOMCU: added access to RC protocol name 2018-11-07 07:35:45 +11:00
Andrew Tridgell a7c5ac8902 AP_IOMCU: run main loop at max rate 
removed delay in main loop to reduce latency of RC input. This works
as we only have one thread
 2018-11-07 07:35:45 +11:00
Andrew Tridgell e6cadfa2d9 AP_IOMCU: disable DSM and SBUS for pulse input 2018-11-07 07:35:45 +11:00
Andrew Tridgell fab181345c AP_IOMCU: fixed override on RC loss 
use mid-stick positions
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 29fb674f3f AP_IOMCU: use macros for LED outputs in iofirmware 2018-11-07 07:35:45 +11:00
Andrew Tridgell a8d91a24b6 AP_IOMCU: fixed compat with nuttx firmwares 
this allows older firmwares to change the IO firmware back to a nuttx
based firmware
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 107ccb3eef AP_IOMCU: enable DSM input in iofirmware 2018-11-07 07:35:45 +11:00
Andrew Tridgell b9e4916c17 AP_IOMCU: fixed delay in DSM bind 2018-11-07 07:35:45 +11:00
Andrew Tridgell 2488d25284 AP_IOMCU: fixed rate of failsafe handling 2018-11-07 07:35:45 +11:00
Andrew Tridgell f8dc17f8ff AP_IOMCU: implement DSM bind 2018-11-07 07:35:45 +11:00
Andrew Tridgell c57fe83217 AP_IOMCU: rename sbus_out.cpp to rc.cpp 
will also handle DSM input on USART1
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 843772a2bc AP_IOMCU: added some debug code 
and lower PKT_MAX_REGS to reduce max DMA size. This fixes an
occasional fault
 2018-11-07 07:35:45 +11:00
Andrew Tridgell 8ece4e3f64 AP_IOMCU: implement BRD_SAFETY_MASK in iofirmware 2018-11-07 07:35:45 +11:00
Andrew Tridgell 27f06ce810 AP_IOMCU: trigger override at 1750 
thanks Michael
 2018-11-07 07:35:45 +11:00
Andrew Tridgell e70a98fa9a AP_IOMCU: support elevon and vtail mixing in failsafe 2018-11-07 07:35:45 +11:00
Andrew Tridgell 285508d568 AP_IOMCU: added initial mixing support 
supports aileron, elevator, throttle and rudder
 2018-11-07 07:35:45 +11:00
Andrew Tridgell ec73a7072b AP_IOMCU: use more bandwidth efficient IO read 2018-11-07 07:35:45 +11:00
Andrew Tridgell 191f72d2e6 AP_IOMCU: added mixing structure to protocol 2018-11-07 07:35:45 +11:00
Andrew Tridgell 1711b93602 AP_IOMCU: fixed read packet count 2018-10-30 13:00:48 +11:00