rmackay9
eea8d67a1e
ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use
2012-03-15 21:58:42 +09:00
analoguedevices
eb530a2045
Rev'ed version number to 2.5. Added more credits
2012-03-15 02:38:54 +00:00
Michael Oborne
42960efe80
sitl cygwin mods
2012-03-15 08:16:50 +08:00
Michael Oborne
010f147fb2
APM Planner 1.1.52
...
add mag field strength - status tab "magfield"
modify param getting.
mag calibrate error checking
hazys - capm mod
2012-03-15 07:10:31 +08:00
Jason Short
59fb1f3542
ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system.
2012-03-13 21:31:16 -07:00
Jason Short
50b4c07261
Lowering the D filter for less latency and less oscillation.
2012-03-13 12:58:46 -07:00
Jason Short
72d03a8046
ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned.
2012-03-13 10:23:31 -07:00
Jason Short
0edc1020ac
ACM: Loiter D performance updates
2012-03-13 10:23:31 -07:00
Jason Short
6edad4d9ef
ACM: Larger filter for Loiter D
2012-03-13 10:23:30 -07:00
Hazy
731a118467
APM Planner
...
fix detection of CAPM board
2012-03-13 20:26:45 +08:00
Andrew Tridgell
adcc20e4d3
Quaternion: credit Justin with the initial idea of using Madgwick
...
thanks Justin!
2012-03-13 13:27:45 +11:00
Michael Oborne
5ad90ac0cc
APM Planner 1.1.51
...
revert posible camera issue
fix apc220 units rts issue
fix bluetooth comport issue - re andrew
cleanup startup test
2012-03-13 07:15:08 +08:00
Jason Short
953b93293e
ACM: removing old define
2012-03-12 13:11:30 -07:00
Jason Short
580c5e109e
ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed.
2012-03-12 13:11:05 -07:00
Jason Short
38153f15e0
ACM: Made Loiter_D 0 by default. Accidentally left it on by default.
2012-03-12 10:37:15 -07:00
Andrew Tridgell
9a6adb9990
DCM: adjust yaw kp constant down to 0.4
...
this makes the time constant for compass errors closely match the
timing of the older releases - about 10 seconds for a 1 radian change
in heading
2012-03-12 17:49:26 +11:00
Andrew Tridgell
aa408655f8
Compass: fixed the order of rotations in the compass driver
...
this should fix the massive heading issues that people have been
reporting. Please test!
2012-03-12 17:33:15 +11:00
Andrew Tridgell
0e6037322a
AP_Declination: fixed build of test sketch
2012-03-12 17:33:15 +11:00
Jason Short
56d2b9ef05
ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter.
2012-03-11 23:21:49 -07:00
Jason Short
5c3cb1c5d0
ACM: removed Filtering code for motors in Quad for testing
2012-03-11 23:21:49 -07:00
Jason Short
d9ccd4f6bd
ACM: made same as Loiter I
2012-03-11 23:21:49 -07:00
Jason Short
e279106b44
ACM: Tuning based on flights today
2012-03-11 23:21:49 -07:00
Jason Short
38a60df189
ACM: Rate_d filter for PID loop of Loiter.
2012-03-11 23:21:49 -07:00
Jason Short
2ac29effe9
ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time.
2012-03-11 23:21:49 -07:00
rmackay9
7cf635889d
ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees
2012-03-12 12:09:04 +09:00
Amilcar Lucas
a203282779
correct small typos in comments
2012-03-11 21:30:09 +01:00
Andrew Tridgell
1e47ab26f2
AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED
...
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
2012-03-11 21:46:41 +11:00
Andrew Tridgell
42a29169f0
SITL: added pgm_read_byte_far()
2012-03-11 20:59:47 +11:00
Andrew Tridgell
b4d69ef473
AP_Declination: fixed usage of headers
2012-03-11 20:59:47 +11:00
Adam M Rivera
ad3a20b6a3
AP_Declination: Updated comment.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Adam M Rivera
2e1cacd67f
AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Adam M Rivera
566bbed7ad
AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Adam M Rivera
c390db5d92
AP_Declination: Added method set_initial_location
...
This will set the declination based on lat/lon if the user has
not yet saved one to the EEPROM, OR if they have specified via the
config parameter that they want it to overwrite the declination every
3D fix.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Adam M Rivera
94d1c48544
AP_Declination: Increased range of supported latitude coordinates.
...
Fixed incorrect type usage to save stack space.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Adam M Rivera
1709403b87
Added AP_Declination test sketch. I will be improving the test sketch soon.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Adam M Rivera
3f28184cb0
Added AP_Declination library. It contains the lookup table (lat/lng -> declination) as well as a method that performs the lookup.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Andrew Tridgell
d4aa0a4879
Compass: removed an incorrect comment
2012-03-11 20:07:38 +11:00
Andrew Tridgell
a20f57c59e
Compass: don't save the orientation to EEPROM
...
there is no point in saving this, the value is only configurable at
compile time for now, and is always set
2012-03-11 15:37:07 +11:00
Andrew Tridgell
cc1961b1e8
Math: any euler angle with pitch > 90 is invalid
...
both DCM and quaternion always return pitch in the range -90 to 90
2012-03-11 15:37:07 +11:00
Andrew Tridgell
36e92bf4ba
Quaternion: update for new Quaternion interface
2012-03-11 15:37:07 +11:00
Andrew Tridgell
eea63ecd6e
DCM: update for new Matrix3f interface
2012-03-11 15:37:07 +11:00
Andrew Tridgell
01535a7a21
AP_Math: update the test suite
2012-03-11 15:37:07 +11:00
Andrew Tridgell
6d08e38d5d
AP_Math: made rotation matrices more C++
...
thanks to Adam for the suggestion
2012-03-11 15:37:07 +11:00
Andrew Tridgell
92ada85f49
AP_Math: allow null pointers in Quaternion::to_euler()
...
this matches the Matrix3f method
2012-03-11 15:37:07 +11:00
Andrew Tridgell
18fcb14335
Quaternion: use the new quaternion API
2012-03-11 15:37:07 +11:00
Andrew Tridgell
a9b8c4dd82
AP_Math: re-work quaternion functions to be more C++ like
...
thanks to Adam for the suggestion!
2012-03-11 15:37:07 +11:00
Andrew Tridgell
ea0fb311af
I2C: fixed cr/lf mess
2012-03-11 15:37:07 +11:00
Andrew Tridgell
5203df2cf8
OpticalFlow: adapt optical flow library to new rotation system
2012-03-11 15:37:07 +11:00
Andrew Tridgell
7aa6ba2c86
OpticalFlow: fixed line endings
...
this library was a mixture of dos and unix line endings, which makes
for very messy editing
2012-03-11 15:37:07 +11:00
Andrew Tridgell
3c145ab61c
Compass: update the compass driver to use the new vector.rotate() method
2012-03-11 15:37:07 +11:00