Andrew Tridgell
cf0f95f81e
AP_BLHeli: allow for negative temperatures from BLHeli32 ESCs
...
ESCs can send negative values
2020-05-25 13:53:32 +10:00
Peter Hall
2c5b0ffa29
AP_BlHeli: always report test results and report band channel once
2020-02-04 10:38:20 +11:00
Peter Hall
d5843ff03a
AP_BLHeli: stop motors if conection lost in motor test
2020-02-04 10:38:20 +11:00
Peter Hall
38f68c4eba
AP_Blheli: allow connection with mixed reversible and normal
2020-02-04 10:38:20 +11:00
Peter Hall
956c3f29a3
AP_BLHeli: allow connection with reversable ESCs
2019-12-24 10:50:16 +11:00
Randy Mackay
1b79f102b6
AP_BLHeli: log motor temp as zero
2019-11-26 11:56:33 +11:00
Andrew Tridgell
3750ed2925
AP_BLHeli: fixed critical errors caused by BLHeli code
2019-11-01 08:44:54 +11:00
Randy Mackay
5b8d7a35e7
AP_BLHeli: minor style fix for get_average_moto_frequency_hz
2019-10-31 12:20:41 +09:00
Andy Piper
b242c5071b
AP_BLHeli: add get_average_motor_frequency_hz() for dynamic filtering
...
correctly calculate rpm from erpm
2019-10-31 11:18:40 +08:00
vierfuffzig
c97f785443
AP_BLHeli: fix eRPM conversion
2019-10-28 21:09:22 +11:00
Henry Wurzburg
880285dad4
AP_BLHeli: Change descriptions in SERVO_BLH_PORT param to actual AP port
2019-10-05 16:35:59 +10:00
vierfuffzig
b89c60d5b0
AP_BLHeli: fix watchdog resets with telemetry active from non-multirotor motors
2019-10-02 21:06:22 +10:00
Michael du Breuil
a1fda8bc76
AP_BLHeli: Update to support newer targets and protocols
2019-05-25 09:37:56 +10:00
Tom Pittenger
cc88e65fc3
AP_BLHeli: rename dataflash to logger
2019-03-28 16:40:57 +11:00
Randy Mackay
9eaef98321
AP_BLHeli: use AP_Logger::Write_ESC
2019-02-18 20:55:47 +09:00
Tom Pittenger
0f311ba04f
AP_BLHeli: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Andrew Tridgell
8cca632b67
AP_BLHeli: adjust for new UART locking API
2018-12-29 15:58:22 +11:00
Randy Mackay
b306e08455
AP_BLHeli: default TRATE to 10hz
...
This only takes effect if BLHeli is enabled with SERVO_BLH_MASK <> 0 or SERVO_BLH_AUTO = 1
2018-12-18 11:21:24 +09:00
Randy Mackay
b1c2229430
AP_BLHeli: add BLHeli to parameter descriptions
2018-12-17 19:01:46 +09:00
Randy Mackay
4bceabb333
AP_BLHeli: minor formatting fixes
2018-12-17 19:01:46 +09:00
Andrew Tridgell
1910f266a6
AP_BLHeli: added SERVO_BLH_REMASK for reversible motors
...
this allows the user to specify which motors are configured as
reversible (3D)
2018-11-16 08:33:35 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
6b2ad734b6
AP_BLHeli: correct SERVO_BLH_POLES parameter value range metadata
2018-11-02 20:44:15 +09:00
vierfuffzig
83f4f5c347
AP_BLHeli: add motor pole parameter
2018-10-20 10:15:34 +11:00
Andrew Tridgell
53fbdc3750
AP_BLHeli: pass motor mask to serial_setup_output()
2018-08-04 19:29:13 +10:00
Andrew Tridgell
476a40c906
AP_BLHeli: improved reliability of pass-thru support
...
this uses a connection cache to prevent re-connecting to an ESC when
not needed, and allows for pass-thru comms on any port, using
SERVO_BLH_PORT parameter
2018-08-04 19:29:13 +10:00
Andrew Tridgell
05a8a5c173
AP_BLHeli: changes from PR review
2018-06-19 09:36:03 +10:00
Andrew Tridgell
34bbd29f25
AP_BLHeli: send ESC telem packets over MAVLink
2018-06-19 09:36:03 +10:00
Andrew Tridgell
c0e8114f9a
AP_BLHeli: removed extra UDID_START define
2018-06-06 07:15:41 +10:00
Andrew Tridgell
a2351bf99f
AP_BLHeli: log bad telem CRCs
2018-04-09 15:32:04 +10:00
Andrew Tridgell
0f2a7108d3
AP_BLHeli: added SERVO_BLH_OTYPE
...
this allows use of BLHeli telemetry on rover, sub and on quadplane fwd
motors
2018-04-09 15:32:04 +10:00
Andrew Tridgell
84d76cf915
AP_BLHeli: removed special handling of oneshot125
2018-04-07 09:10:29 +10:00
Andrew Tridgell
fff143d83e
AP_BLHeli: default protocol timeout to 0
...
this gives best compatibility with BLHeliSuite
2018-04-07 09:10:29 +10:00
Andrew Tridgell
b77ba8fbd1
AP_BLHeli: improved debug output
...
allow debug on any MAVLink port
also fixed handling of passthru for oneshot125
2018-04-07 09:10:29 +10:00
Andrew Tridgell
61d513e91b
AP_BLHeli: use get_esc_scaling() for motor range
...
this fixes an issue with blhelisuite init when min is not 1000
2018-04-07 09:10:29 +10:00
Andrew Tridgell
c17338473d
AP_BLHeli: unlock uart on InterfaceExit
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6f704b3818
AP_BLHeli: fixed use of SERVO_BLH_AUTO
2018-04-07 09:10:29 +10:00
Andrew Tridgell
7c678bd707
AP_BLHeli: use UART locking
...
this gains exclusive access to the UART while MSP protocol is active to
prevent protocol corruption due to other drivers writing to hal.console
2018-04-07 09:10:29 +10:00
Andrew Tridgell
b7bcee69a3
AP_BLHeli: added telemetry logging support
...
allow telemetry feedback from BLHeli_32 ESCs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
fde092a246
AP_BLHeli: check for rcout serial support
...
don't build AP_BLHeli on HALs that can't support serial output to ESCs
2018-04-07 09:10:29 +10:00
Andrew Tridgell
1fc0047fd9
AP_BLHeli: raise timout to 60s
2018-04-07 09:10:29 +10:00
Andrew Tridgell
3daf27db64
AP_BLHeli: expanded test code
2018-04-07 09:10:29 +10:00
Andrew Tridgell
ee94d73e77
AP_BLHeli: added SERVO_BLH_TMOUT parameter
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9aa5a97f26
AP_BLHeli: added test interface
...
and added delay on serial init
2018-04-07 09:10:29 +10:00
Andrew Tridgell
b0442d1c5c
AP_BLHeli: fixed build for rover
...
only plane and copter have AP_Motors for motors mask
2018-04-07 09:10:29 +10:00
Andrew Tridgell
54185af8ef
AP_BLHeli: removed test code
...
not needed any more, and no longer compiles
2018-04-07 09:10:29 +10:00
Andrew Tridgell
9ba3992d9e
AP_BLHeli: added SERVO_BLHI_AUTO option
...
makes choosing motor mask much easier for multicopters
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a1a83ab768
AP_BLHeli: added ESC serial protocol implementation
...
this implements the MSP and BLHeli protocols for passthru control of
BLHeli ESCs
2018-04-07 09:10:29 +10:00