ardupilot/ArduPlane/test.cpp

532 lines
15 KiB
C++
Raw Normal View History

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
2015-05-13 03:09:36 -03:00
#include "Plane.h"
2015-05-13 03:09:36 -03:00
#if CLI_ENABLED == ENABLED
2014-03-03 09:50:45 -04:00
// Creates a constant array of structs representing menu options
// and stores them in Flash memory, not RAM.
// User enters the string in the console to call the functions on the right.
// See class Menu in AP_Common for implementation details
static const struct Menu::command test_menu_commands[] = {
2015-05-13 03:09:36 -03:00
{"pwm", MENU_FUNC(test_radio_pwm)},
{"radio", MENU_FUNC(test_radio)},
{"passthru", MENU_FUNC(test_passthru)},
{"failsafe", MENU_FUNC(test_failsafe)},
{"relay", MENU_FUNC(test_relay)},
{"waypoints", MENU_FUNC(test_wp)},
{"xbee", MENU_FUNC(test_xbee)},
{"modeswitch", MENU_FUNC(test_modeswitch)},
2012-08-21 23:19:51 -03:00
// Tests below here are for hardware sensors only present
// when real sensors are attached or they are emulated
2015-05-13 03:09:36 -03:00
{"gps", MENU_FUNC(test_gps)},
{"ins", MENU_FUNC(test_ins)},
{"airspeed", MENU_FUNC(test_airspeed)},
{"airpressure", MENU_FUNC(test_pressure)},
{"compass", MENU_FUNC(test_mag)},
{"logging", MENU_FUNC(test_logging)},
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4 || CONFIG_HAL_BOARD == HAL_BOARD_VRBRAIN
2015-05-13 03:09:36 -03:00
{"shell", MENU_FUNC(test_shell)},
#endif
};
// A Macro to create the Menu
MENU(test_menu, "test", test_menu_commands);
2015-05-13 03:09:36 -03:00
int8_t Plane::test_mode(uint8_t argc, const Menu::arg *argv)
{
cliSerial->printf("Test Mode\n\n");
2012-08-21 23:19:51 -03:00
test_menu.run();
return 0;
}
2015-05-13 03:09:36 -03:00
void Plane::print_hit_enter()
{
cliSerial->printf("Hit Enter to exit.\n\n");
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_radio_pwm(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
while(1) {
hal.scheduler->delay(20);
2012-08-21 23:19:51 -03:00
// Filters radio input - adjust filters in the radio.pde file
// ----------------------------------------------------------
read_radio();
cliSerial->printf("IN:\t1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n",
(int)channel_roll->radio_in,
(int)channel_pitch->radio_in,
(int)channel_throttle->radio_in,
(int)channel_rudder->radio_in,
2012-08-21 23:19:51 -03:00
(int)g.rc_5.radio_in,
(int)g.rc_6.radio_in,
(int)g.rc_7.radio_in,
(int)g.rc_8.radio_in);
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_passthru(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
while(1) {
hal.scheduler->delay(20);
// New radio frame? (we could use also if((millis()- timer) > 20)
2014-03-25 00:41:14 -03:00
if (hal.rcin->new_input()) {
2015-10-25 16:22:31 -03:00
cliSerial->print("CH:");
2012-08-21 23:19:51 -03:00
for(int16_t i = 0; i < 8; i++) {
2012-12-04 18:22:21 -04:00
cliSerial->print(hal.rcin->read(i)); // Print channel values
2012-09-18 00:48:08 -03:00
print_comma();
servo_write(i, hal.rcin->read(i)); // Copy input to Servos
}
cliSerial->println();
}
if (cliSerial->available() > 0) {
return (0);
}
}
return 0;
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_radio(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
// read the radio to set trims
// ---------------------------
trim_radio();
while(1) {
hal.scheduler->delay(20);
2012-08-21 23:19:51 -03:00
read_radio();
channel_roll->calc_pwm();
channel_pitch->calc_pwm();
channel_throttle->calc_pwm();
channel_rudder->calc_pwm();
2012-08-21 23:19:51 -03:00
// write out the servo PWM values
// ------------------------------
set_servos();
cliSerial->printf("IN 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n",
(int)channel_roll->control_in,
(int)channel_pitch->control_in,
(int)channel_throttle->control_in,
(int)channel_rudder->control_in,
2012-08-21 23:19:51 -03:00
(int)g.rc_5.control_in,
(int)g.rc_6.control_in,
(int)g.rc_7.control_in,
(int)g.rc_8.control_in);
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_failsafe(uint8_t argc, const Menu::arg *argv)
{
2012-12-04 18:22:21 -04:00
uint8_t fail_test;
2012-08-21 23:19:51 -03:00
print_hit_enter();
for(int16_t i = 0; i < 50; i++) {
hal.scheduler->delay(20);
2012-08-21 23:19:51 -03:00
read_radio();
}
// read the radio to set trims
// ---------------------------
trim_radio();
oldSwitchPosition = readSwitch();
cliSerial->printf("Unplug battery, throttle in neutral, turn off radio.\n");
while(channel_throttle->control_in > 0) {
hal.scheduler->delay(20);
2012-08-21 23:19:51 -03:00
read_radio();
}
while(1) {
hal.scheduler->delay(20);
2012-08-21 23:19:51 -03:00
read_radio();
if(channel_throttle->control_in > 0) {
cliSerial->printf("THROTTLE CHANGED %d \n", (int)channel_throttle->control_in);
2012-08-21 23:19:51 -03:00
fail_test++;
}
if(oldSwitchPosition != readSwitch()) {
cliSerial->printf("CONTROL MODE CHANGED: ");
print_flight_mode(cliSerial, readSwitch());
cliSerial->println();
2012-08-21 23:19:51 -03:00
fail_test++;
}
if(rc_failsafe_active()) {
cliSerial->printf("THROTTLE FAILSAFE ACTIVATED: %d, ", (int)channel_throttle->radio_in);
print_flight_mode(cliSerial, readSwitch());
cliSerial->println();
2012-08-21 23:19:51 -03:00
fail_test++;
}
if(fail_test > 0) {
return (0);
}
if(cliSerial->available() > 0) {
cliSerial->printf("LOS caused no change in APM.\n");
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_relay(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
while(1) {
cliSerial->printf("Relay on\n");
relay.on(0);
hal.scheduler->delay(3000);
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
cliSerial->printf("Relay off\n");
relay.off(0);
hal.scheduler->delay(3000);
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_wp(uint8_t argc, const Menu::arg *argv)
{
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
// save the alitude above home option
if (g.RTL_altitude_cm < 0) {
cliSerial->printf("Hold current altitude\n");
2012-08-21 23:19:51 -03:00
}else{
cliSerial->printf("Hold altitude of %dm\n", (int)g.RTL_altitude_cm/100);
2012-08-21 23:19:51 -03:00
}
cliSerial->printf("%d waypoints\n", (int)mission.num_commands());
cliSerial->printf("Hit radius: %d\n", (int)g.waypoint_radius);
cliSerial->printf("Loiter radius: %d\n\n", (int)g.loiter_radius);
2014-03-03 09:50:45 -04:00
for(uint8_t i = 0; i <= mission.num_commands(); i++) {
AP_Mission::Mission_Command temp_cmd;
if (mission.read_cmd_from_storage(i,temp_cmd)) {
test_wp_print(temp_cmd);
}
2012-08-21 23:19:51 -03:00
}
2012-08-21 23:19:51 -03:00
return (0);
}
2015-05-13 03:09:36 -03:00
void Plane::test_wp_print(const AP_Mission::Mission_Command& cmd)
{
cliSerial->printf("command #: %d id:%d options:%d p1:%d p2:%ld p3:%ld p4:%ld \n",
2014-03-03 09:50:45 -04:00
(int)cmd.index,
(int)cmd.id,
(int)cmd.content.location.options,
(int)cmd.p1,
(long)cmd.content.location.alt,
(long)cmd.content.location.lat,
(long)cmd.content.location.lng);
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_xbee(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
cliSerial->printf("Begin XBee X-CTU Range and RSSI Test:\n");
2012-08-21 23:19:51 -03:00
while(1) {
2012-12-04 18:22:21 -04:00
if (hal.uartC->available())
hal.uartC->write(hal.uartC->read());
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_modeswitch(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
cliSerial->printf("Control CH ");
2012-08-21 23:19:51 -03:00
cliSerial->println(FLIGHT_MODE_CHANNEL, BASE_DEC);
2012-08-21 23:19:51 -03:00
while(1) {
hal.scheduler->delay(20);
2012-12-04 18:22:21 -04:00
uint8_t switchPosition = readSwitch();
2012-08-21 23:19:51 -03:00
if (oldSwitchPosition != switchPosition) {
cliSerial->printf("Position %d\n", (int)switchPosition);
2012-08-21 23:19:51 -03:00
oldSwitchPosition = switchPosition;
}
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2011-12-28 00:53:14 -04:00
/*
2012-08-21 23:19:51 -03:00
* test the dataflash is working
2011-12-28 00:53:14 -04:00
*/
2015-05-13 03:09:36 -03:00
int8_t Plane::test_logging(uint8_t argc, const Menu::arg *argv)
2011-12-28 00:53:14 -04:00
{
2013-02-22 19:15:15 -04:00
DataFlash.ShowDeviceInfo(cliSerial);
2011-12-28 00:53:14 -04:00
return 0;
}
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4 || CONFIG_HAL_BOARD == HAL_BOARD_VRBRAIN
/*
* run a debug shell
*/
2015-05-13 03:09:36 -03:00
int8_t Plane::test_shell(uint8_t argc, const Menu::arg *argv)
{
hal.util->run_debug_shell(cliSerial);
return 0;
}
#endif
//-------------------------------------------------------------------------------------------
// tests in this section are for real sensors or sensors that have been simulated
2015-05-13 03:09:36 -03:00
int8_t Plane::test_gps(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
2012-08-21 23:19:51 -03:00
2014-03-28 16:52:48 -03:00
uint32_t last_message_time_ms = 0;
2012-08-21 23:19:51 -03:00
while(1) {
hal.scheduler->delay(100);
2012-08-21 23:19:51 -03:00
2014-03-28 16:52:48 -03:00
gps.update();
2012-08-21 23:19:51 -03:00
2014-03-28 16:52:48 -03:00
if (gps.last_message_time_ms() != last_message_time_ms) {
last_message_time_ms = gps.last_message_time_ms();
const Location &loc = gps.location();
cliSerial->printf("Lat: %ld, Lon %ld, Alt: %ldm, #sats: %d\n",
2014-03-28 16:52:48 -03:00
(long)loc.lat,
(long)loc.lng,
(long)loc.alt/100,
(int)gps.num_sats());
} else {
cliSerial->printf(".");
2012-08-21 23:19:51 -03:00
}
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_ins(uint8_t argc, const Menu::arg *argv)
{
//cliSerial->printf("Calibrating.");
2013-01-13 01:04:18 -04:00
ahrs.init();
ahrs.set_fly_forward(true);
2013-05-23 22:21:32 -03:00
ahrs.set_wind_estimation(true);
2013-01-13 01:04:18 -04:00
ins.init(scheduler.get_loop_rate_hz());
ahrs.reset();
2012-08-21 23:19:51 -03:00
print_hit_enter();
hal.scheduler->delay(1000);
uint8_t counter = 0;
2012-08-21 23:19:51 -03:00
while(1) {
hal.scheduler->delay(20);
if (micros() - fast_loopTimer_us > 19000UL) {
fast_loopTimer_us = micros();
2012-08-21 23:19:51 -03:00
// INS
2012-08-21 23:19:51 -03:00
// ---
ahrs.update();
if(g.compass_enabled) {
counter++;
if(counter == 5) {
2012-08-21 23:19:51 -03:00
compass.read();
counter = 0;
2012-08-21 23:19:51 -03:00
}
}
// We are using the INS
2012-08-21 23:19:51 -03:00
// ---------------------
Vector3f gyros = ins.get_gyro();
Vector3f accels = ins.get_accel();
cliSerial->printf("r:%4d p:%4d y:%3d g=(%5.1f %5.1f %5.1f) a=(%5.1f %5.1f %5.1f)\n",
(int)ahrs.roll_sensor / 100,
(int)ahrs.pitch_sensor / 100,
(uint16_t)ahrs.yaw_sensor / 100,
(double)gyros.x, (double)gyros.y, (double)gyros.z,
(double)accels.x, (double)accels.y, (double)accels.z);
2012-08-21 23:19:51 -03:00
}
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_mag(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
if (!g.compass_enabled) {
cliSerial->printf("Compass: ");
2012-08-21 23:19:51 -03:00
print_enabled(false);
return (0);
}
if (!compass.init()) {
cliSerial->println("Compass initialisation failed!");
return 0;
}
2013-01-13 01:04:18 -04:00
ahrs.init();
ahrs.set_fly_forward(true);
2013-05-23 22:21:32 -03:00
ahrs.set_wind_estimation(true);
ahrs.set_compass(&compass);
// we need the AHRS initialised for this test
ins.init(scheduler.get_loop_rate_hz());
ahrs.reset();
uint16_t counter = 0;
float heading = 0;
print_hit_enter();
while(1) {
hal.scheduler->delay(20);
if (micros() - fast_loopTimer_us > 19000UL) {
fast_loopTimer_us = micros();
// INS
2012-08-21 23:19:51 -03:00
// ---
ahrs.update();
if(counter % 5 == 0) {
if (compass.read()) {
// Calculate heading
const Matrix3f &m = ahrs.get_rotation_body_to_ned();
heading = compass.calculate_heading(m);
compass.learn_offsets();
}
}
2012-08-21 23:19:51 -03:00
counter++;
if (counter>20) {
2013-12-09 02:47:38 -04:00
if (compass.healthy()) {
const Vector3f &mag_ofs = compass.get_offsets();
const Vector3f &mag = compass.get_field();
cliSerial->printf("Heading: %d, XYZ: %.0f, %.0f, %.0f,\tXYZoff: %6.2f, %6.2f, %6.2f\n",
2013-12-08 23:10:35 -04:00
(wrap_360_cd(ToDeg(heading) * 100)) /100,
(double)mag.x, (double)mag.y, (double)mag.z,
(double)mag_ofs.x, (double)mag_ofs.y, (double)mag_ofs.z);
} else {
cliSerial->println("compass not healthy");
}
counter=0;
}
2012-08-21 23:19:51 -03:00
}
if (cliSerial->available() > 0) {
break;
}
}
// save offsets. This allows you to get sane offset values using
2012-08-21 23:19:51 -03:00
// the CLI before you go flying.
cliSerial->println("saving offsets");
compass.save_offsets();
return (0);
}
//-------------------------------------------------------------------------------------------
// real sensors that have not been simulated yet go here
2015-05-13 03:09:36 -03:00
int8_t Plane::test_airspeed(uint8_t argc, const Menu::arg *argv)
{
2012-08-21 23:19:51 -03:00
if (!airspeed.enabled()) {
cliSerial->printf("airspeed: ");
2012-08-21 23:19:51 -03:00
print_enabled(false);
return (0);
}else{
print_hit_enter();
2014-11-13 06:12:59 -04:00
zero_airspeed(false);
cliSerial->printf("airspeed: ");
2012-08-21 23:19:51 -03:00
print_enabled(true);
while(1) {
hal.scheduler->delay(20);
2012-08-21 23:19:51 -03:00
read_airspeed();
cliSerial->printf("%.1f m/s\n", (double)airspeed.get_airspeed());
2012-08-21 23:19:51 -03:00
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
}
2015-05-13 03:09:36 -03:00
int8_t Plane::test_pressure(uint8_t argc, const Menu::arg *argv)
{
cliSerial->printf("Uncalibrated relative airpressure\n");
2012-08-21 23:19:51 -03:00
print_hit_enter();
2012-08-21 23:19:51 -03:00
init_barometer();
2012-08-21 23:19:51 -03:00
while(1) {
hal.scheduler->delay(100);
2015-01-05 00:56:18 -04:00
barometer.update();
if (!barometer.healthy()) {
cliSerial->println("not healthy");
} else {
cliSerial->printf("Alt: %0.2fm, Raw: %f Temperature: %.1f\n",
(double)barometer.get_altitude(),
(double)barometer.get_pressure(),
(double)barometer.get_temperature());
}
if(cliSerial->available() > 0) {
2012-08-21 23:19:51 -03:00
return (0);
}
}
}
2015-05-13 03:09:36 -03:00
void Plane::print_enabled(bool b)
{
if (b) {
cliSerial->printf("en");
2015-05-13 03:09:36 -03:00
} else {
cliSerial->printf("dis");
2015-05-13 03:09:36 -03:00
}
cliSerial->printf("abled\n");
2015-05-13 03:09:36 -03:00
}
#endif // CLI_ENABLED