skip_if_broken_multiprocessing_synchronize() only attempts for create
a semaphore on Linux to fix multiprocessing
test_resource_tracker_reused() on macOS.
For me as a non native English speaker, the sentence with its embedded clause was very hard to understand.
modified: Lib/email/utils.py
Automerge-Triggered-By: @csabella
zip() now supports PEP 618's strict parameter, which raises a
ValueError if the arguments are exhausted at different lengths.
Patch by Brandt Bucher.
Co-authored-by: Brandt Bucher <brandtbucher@gmail.com>
Co-authored-by: Ram Rachum <ram@rachum.com>
The following error messages get produced:
- `cannot delete ...` for invalid `del` targets
- `... is an illegal 'for' target` for invalid targets in for
statements
- `... is an illegal 'with' target` for invalid targets in
with statements
Additionally, a few `cut`s were added in various places before the
invocation of the `invalid_*` rule, in order to speed things
up.
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
On Linux, skip tests using multiprocessing if the current user cannot
create a file in /dev/shm/ directory. Add the
skip_if_broken_multiprocessing_synchronize() function to the
test.support module.
test_hashlib emits some warnings when it cannot find some hashes
as it assumes they failed to compile. Since we can disable hashes
through configure, we emit the warnings only in the case that we
did not intentionaly disable them.
Automerge-Triggered-By: @tiran
Fix test_copyreg when numpy is installed: test.pickletester now
saves/restores warnings.filters when importing numpy, to ignore
filters installed by numpy.
Add the save_restore_warnings_filters() function to the
test.support.warnings_helper module.
When a file ends with a line that contains a line continuation character
the text of the emitted SyntaxError is empty, contrary to the old
parser, where the error text contained the text of the last line.
ensurepip optionally installs or upgrades 'pip' and 'setuptools' using
the version of those modules bundled with Python. The internal PIP
installation routine by default temporarily uses its cache, if it
exists. This is undesirable as Python builds and installations may be
independent of the user running the build, whilst PIP cache location
is dependent on the user's environment and outside of the build
environment.
At the same time, there's no value in using the cache while installing
bundled modules.
This change disables PIP caching when used in ensurepip.
In Python 3.7 the behavior of parse_multipart changed requiring CONTENT-LENGTH
header, this fix remove this header as required and fix FieldStorage
read_lines_to_outerboundary, by not using limit when it's negative,
since by default it's -1 if not content-length and keeps substracting what
was read from the file object.
Also added a test case for this problem.
Using a log2n way to fill a much smaller buffer, and receiving in a cleaner way with EOF.
The failing test was reproducible using the following command thanks to @aeros :
```bash
./python -m test test_asyncio.test_sock_lowlevel --match test_sock_client_racing -j100 -F -v
```
According to test results, we may still need to bump the timeout:
5aad027db9/Lib/test/test_asyncio/test_sock_lowlevel.py (L256-L257)
Remote host cyrus.andrew.cmu.edu is blocking incoming connections and is
causing test suite to fail.
Signed-off-by: Christian Heimes <christian@python.org>
unittest.TestCase.assertWarns no longer raises a RuntimeException
when accessing a module's ``__warningregistry__`` causes importation of a new
module, or when a new module is imported in another thread.
Patch by Kernc.
This commit removes the old parser, the deprecated parser module, the old parser compatibility flags and environment variables and all associated support code and documentation.
Move TransientResource, time_out, socket_peer_reset and
ioerror_peer_reset from test.support to test_urllib2net.
Remove "import errno" from test.support.
It no longer serves a purpose (there's only one parser) and having "new" in any name will eventually look odd. Also, it impinges on a potential sub-namespace, `__new_...__`.
Followup of bpo-40854, there is one remaining usage of PLATLIBDIR
which should be replaced by config->platlibdir.
test_sys checks that sys.platlibdir attribute exists and is a string.
Update Makefile: getpath.c and sysmodule.c no longer need PLATLIBDIR
macro, PyConfig.platlibdir member is used instead.
Co-authored-by: Sandro Mani <manisandro@gmail.com>
The GDB provided by HPE on HP-UX contains a modified version string. Therefore
the tests fail. Adapt the regex to match that string.
Patch by Michael Osipov.
Co-Authored-by: Michael Osipov <michael.osipov@siemens.com>
A line with only a line continuation character should be considered
a blank line at tokenizer level so that only a single NEWLINE token
gets emitted. The old parser was working around the issue, but the
new parser threw a `SyntaxError` for valid input. For example,
an empty line following a line continuation character was interpreted
as a `SyntaxError`.
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
test_repl.test_close_stdin() now calls
support.suppress_msvcrt_asserts() to fix the test on Windows.
* Move suppress_msvcrt_asserts() from test.libregrtest.setup to
test.support. Make its verbose parameter optional: verbose=False by
default.
* Add msvcrt.GetErrorMode().
* SuppressCrashReport now uses GetErrorMode() and SetErrorMode() of
the msvcrt module, rather than using ctypes.
* Remove also an unused variable (deadline) in wait_process().
* PEP 554 for use in test suite
* 📜🤖 Added by blurb_it.
* Fix space
* Add doc to doc tree
* Move to modules doc tree
* Fix suspicious doc errors
* Fix test__all
* Docs docs docs
* Support isolated and fix wait
* Fix white space
* Remove undefined from __all__
* Fix recv and add exceptions
* Remove unused exceptions, fix pep 8 formatting errors and fix _NOT_SET in recv_nowait()
* Update Lib/test/support/interpreters.py
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
* Remove documentation (module is for internal use)
Co-authored-by: nanjekyejoannah <joannah.nanjekye@ibm.com>
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Export explicitly the Py_GetArgcArgv() function to the C API and
document the function. Previously, it was exported implicitly which
no longer works since Python is built with -fvisibility=hidden.
* Add PyConfig._orig_argv member.
* Py_InitializeFromConfig() no longer calls _PyConfig_Write() twice.
* PyConfig_Read() no longer initializes Py_GetArgcArgv(): it is now
_PyConfig_Write() responsibility.
* _PyConfig_Write() result type becomes PyStatus instead of void.
* Write an unit test on Py_GetArgcArgv().
* Provide native .files support on SourceFileLoader.
* Add native importlib.resources.files() support to zipimporter. Remove fallback support.
* make regen-all
* 📜🤖 Added by blurb_it.
* Move 'files' into the ResourceReader so it can carry the relevant module name context.
* Create 'importlib.readers' module and add FileReader to it.
* Add zip reader and rely on it for a TraversableResources object on zipimporter.
* Remove TraversableAdapter, no longer needed.
* Update blurb.
* Replace backslashes with forward slashes.
* Incorporate changes from importlib_metadata 2.0, finalizing the interface for extension via get_resource_reader.
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Would be nice to backport to python 3.7+. I don't think it's worth the hassle to backport this all the way down to 3.10. But I'll let the maintainers decide.
This is hard to test because the test setup already includes this [environment variable](https://github.com/python/cpython/blob/master/Lib/test/pythoninfo.py#L292)
Let me know if something doesn't match the PR guidelines. This is my first PR in the python source code.
my_fgets() now calls _PyOS_InterruptOccurred(tstate) to check for
pending signals, rather calling PyOS_InterruptOccurred().
my_fgets() is called with the GIL released, whereas
PyOS_InterruptOccurred() must be called with the GIL held.
test_repl: use text=True and avoid SuppressCrashReport in
test_multiline_string_parsing().
Fix my_fgets() on Windows: fgets(fp) does crash if fileno(fp) is closed.
2020-06-03 14:39:59 +02:00
Srinivas Reddy Thatiparthy (శ్రీనివాస్ రెడ్డి తాటిపర్తి)
Refactor formatweekday(), formatmonthname() methods in LocaleHTMLCalendar and LocaleTextCalendar classes in calendar module to call the base class methods. This enables customizable CSS classes for LocaleHTMLCalendar and LocaleTextCalendar.
Patch by Srinivas Reddy Thatiparthy
The topological sort functionality that was introduced initially in the
functools module has been moved to a new graphlib module to
better accommodate the new tools and keep the original scope of the
functools module.
When I wrote the documentation for `asyncio.to_thread()`, I mistakenly assumed that `return await loop.run_in_executor(...)` within an async def function would return a Future. In reality, it returns a coroutine.
This likely won't affect typical usage of `asyncio.to_thread()`, but it's important for the documentation to be correct here. In general, we also tend to avoid returning futures from high-level APIs in asyncio.
Leave selection when right click within. This exception to clearing selections when right-clicking was omitted from the previous commit, 4ca060d. I did not realize that this completely disabled the context menu entries, and I should have merged a minimal fix immediately. An automated test should follow.
* bpo-29882: Add an efficient popcount method for integers
* Update 'sign bit' and versionadded in docs
* Add entry to whatsnew document
* Doc: use positive example, mention population count
* Minor cleanups of the core code
* Move popcount_digit closer to where it's used
* Use z instead of self after conversion
* Add 'absolute value' and 'population count' to docstring
* Fix clinic error about missing summary line
* Ensure popcount_digit is portable with 64-bit ints
Co-authored-by: Mark Dickinson <dickinsm@gmail.com>
* Fix failure of _Py_dg_dtoa to remove trailing zeros
* Add regression test and news entry
* Add explanation about why it's safe to strip trailing zeros
* Make code safer, clean up comments, add change note at top of file
* Nitpick: avoid implicit int-to-float conversion in tests
* bpo-39040: Fix parsing of email headers with encoded-words inside a quoted string.
It is fairly common to find malformed mime headers (especially content-disposition
headers) where the parameter values, instead of being encoded to RFC
standards, are "encoded" by doing RFC 2047 "encoded word" encoding, and
then enclosing the whole thing in quotes. The processing of these malformed
headers was incorrectly leaving the spaces between encoded words in the decoded
text (whitespace between adjacent encoded words is supposed to be stripped on
decoding). This changeset fixes the encoded word processing inside quoted strings
(bare-quoted-string) to do correct RFC 2047 decoding by stripping that
whitespace.
Skip new "racing" socket tests which fail randomly until someone fix
them, to ease analysis of buildbot failures (skip tests which are
known to be broken/unstable).
Previously, the result could have been an instance of a subclass of int.
Also revert bpo-26202 and make attributes start, stop and step of the range
object having exact type int.
Add private function _PyNumber_Index() which preserves the old behavior
of PyNumber_Index() for performance to use it in the conversion functions
like PyLong_AsLong().
test.support module now imports the platform and subprocess modules
lazily to reduce the number of modules imported by
"import test.support".
With this change, the threading module is no longer imported
indirectly by "import test.support".
Use sys.version rather than platform.machine() to detect the Windows
ARM32 buildbot.
check_impl_detail() of test.support now uses sys.implementation.name,
instead of platform.python_implementation().lower(). This change
prepares test.support to import the platform module lazily.
If ctypes fails to convert the result of a callback or if a ctypes
callback function raises an exception, sys.unraisablehook is now
called with an exception set. Previously, the error was logged into
stderr by PyErr_Print().
hashlib.compare_digest uses OpenSSL's CRYPTO_memcmp() function
when OpenSSL is available.
Note: The _operator module is a builtin module. I don't want to add
libcrypto dependency to libpython. Therefore I duplicated the wrapper
function and added a copy to _hashopenssl.c.
ctypes now raises an ArgumentError when a callback
is invoked with more than 1024 arguments.
The ctypes module allocates arguments on the stack in
ctypes_callproc() using alloca(), which is problematic
when large numbers of arguments are passed. Instead
of a stack overflow, this commit raises an ArgumentError
if more than 1024 parameters are passed.
These are like keywords but they only work in context; they are not reserved except when there is an exact match.
This would enable things like match statements without reserving `match` (which would be bad for the `re.match()` function and probably lots of other places).
Automerge-Triggered-By: @gvanrossum
The 'extra' argument is not always used by custom logger adapters. For
example:
```python
class IndentAdapter(logging.LoggerAdapter):
def process(self, msg, kwargs):
indent = kwargs.pop(indent, 1)
return ' ' * indent + msg, kwargs
```
It is cleaner and friendlier to default the 'extra' argument to None
instead of either forcing the subclasses of LoggerAdapter to pass a None
value directly or to override the constructor.
This change is backward compatible because existing calls to
`LoggerAdapter.__init__` are already passing a value for the second
argument.
Automerge-Triggered-By: @vsajip
When a `SyntaxError` in the expression part of a fstring is found,
the filename attribute of the `SyntaxError` is always `<fstring>`.
With this commit, it gets changed to always have the name of the file
the fstring resides in.
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
:mod:`hashlib` no longer falls back to builtin hash implementations when
OpenSSL provides a hash digest and the algorithm is blocked by security
policy.
Signed-off-by: Christian Heimes <christian@python.org>
This updates _PyErr_ChainStackItem() to use _PyErr_SetObject()
instead of _PyErr_ChainExceptions(). This prevents a hang in
certain circumstances because _PyErr_SetObject() performs checks
to prevent cycles in the exception context chain while
_PyErr_ChainExceptions() doesn't.
The reset_peak function sets the peak memory size to the current size,
representing a resetting of that metric. This allows for recording the
peak of specific sections of code, ignoring other code that may have
had a higher peak (since the most recent `tracemalloc.start()` or
tracemalloc.clear_traces()` call).
The error message, generated for a non-parenthesized generator expression
in function calls, was still the generic `invalid syntax`, when the generator expression wasn't appearing as the first argument in the call. With this patch, even on input like `f(a, b, c for c in d, e)`, the correct error message gets produced.
- Fix upload test on systems that blocks MD5
- Add SHA2-256 and Blake2b-256 digests based on new Warehous and twine
specs.
Signed-off-by: Christian Heimes <christian@python.org>
* PEP 554 for use in test suite
* 📜🤖 Added by blurb_it.
* Fix space
* Add doc to doc tree
* Move to modules doc tree
* Fix suspicious doc errors
* Fix test__all
* Docs docs docs
* Support isolated and fix wait
* Fix white space
* Remove undefined from __all__
* Fix recv and add exceptions
* Remove unused exceptions, fix pep 8 formatting errors and fix _NOT_SET in recv_nowait()
Co-authored-by: nanjekyejoannah <joannah.nanjekye@ibm.com>
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Implements `asyncio.to_thread`, a coroutine for asynchronously running IO-bound functions in a separate thread without blocking the event loop. See the discussion starting from [here](https://github.com/python/cpython/pull/18410#issuecomment-628930973) in GH-18410 for context.
Automerge-Triggered-By: @aeros
Make the the following imports lazy in test.support:
* bz2
* gzip
* lzma
* resource
* zlib
The following test.support decorators now need to be called
with parenthesis:
* @support.requires_bz2
* @support.requires_gzip
* @support.requires_lzma
* @support.requires_zlib
For example, "@requires_zlib" becomes "@requires_zlib()".
When unparsing a non-empty tuple, the parentheses can be safely
omitted if there aren't any elements that explicitly require them (such as starred expressions).
Unprintable characters such as `\x00` weren't correctly roundtripped
due to not using default string repr when generating docstrings. This
patch correctly encodes all unprintable characters (except `\n` and `\t`, which
are commonly used for formatting, and found unescaped).
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
Co-authored-by: Batuhan Taskaya <isidentical@gmail.com>
Ifdef is not necessary, as AF_INET6 is supported from Windows Vista, and other code in overlapped.c uses AF_INET6 and is not ifdef'd.
Change the raised exception so users are not fooled to think it comes from Windows API.
Automerge-Triggered-By: @njsmith
When an asyncio.Task is cancelled, the exception traceback now
starts with where the task was first interrupted. Previously,
the traceback only had "depth one."
This was not specified in the PEP, but it will likely be a frequently requested feature if it's not included.
This includes only the "canonical" zones, not a simple listing of every valid value of `key` that can be passed to `Zoneinfo`, because it seems likely that that's what people will want.
The internal module ``_hashlib`` wraps and exposes OpenSSL's HMAC API. The
new code will be used in Python 3.10 after the internal implementation
details of the pure Python HMAC module are no longer part of the public API.
The code is based on a patch by Petr Viktorin for RHEL and Python 3.6.
Co-Authored-By: Petr Viktorin <encukou@gmail.com>
{date, datetime}.isocalendar() now return a private custom named tuple object
IsoCalendarDate rather than a simple tuple.
In order to leave IsocalendarDate as a private class and to improve what
backwards compatibility is offered for pickling the result of a
datetime.isocalendar() call, add a __reduce__ method to the named tuples that
reduces them to plain tuples. (This is the part of this PR most likely to cause
problems — if it causes major issues, switching to a strucseq or equivalent
would be prudent).
The pure python implementation of IsoCalendarDate uses positional-only
arguments, since it is private and only constructed by position anyway; the
equivalent change in the argument clinic on the C side would require us to move
the forward declaration of the type above the clinic import for whatever
reason, so it seems preferable to hold off on that for now.
bpo-24416: https://bugs.python.org/issue24416
Original PR by Dong-hee Na with only minor alterations by Paul Ganssle.
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
This is the initial implementation of PEP 615, the zoneinfo module,
ported from the standalone reference implementation (see
https://www.python.org/dev/peps/pep-0615/#reference-implementation for a
link, which has a more detailed commit history).
This includes (hopefully) all functional elements described in the PEP,
but documentation is found in a separate PR. This includes:
1. A pure python implementation of the ZoneInfo class
2. A C accelerated implementation of the ZoneInfo class
3. Tests with 100% branch coverage for the Python code (though C code
coverage is less than 100%).
4. A compile-time configuration option on Linux (though not on Windows)
Differences from the reference implementation:
- The module is arranged slightly differently: the accelerated module is
`_zoneinfo` rather than `zoneinfo._czoneinfo`, which also necessitates
some changes in the test support function. (Suggested by Victor
Stinner and Steve Dower.)
- The tests are arranged slightly differently and do not include the
property tests. The tests live at test/test_zoneinfo/test_zoneinfo.py
rather than test/test_zoneinfo.py or test/test_zoneinfo/__init__.py
because we may do some refactoring in the future that would likely
require this separation anyway; we may:
- include the property tests
- automatically run all the tests against both pure Python and C,
rather than manually constructing C and Python test classes (similar
to the way this works with test_datetime.py, which generates C
and Python test cases from datetimetester.py).
- This includes a compile-time configuration option on Linux (though not
on Windows); added with much help from Thomas Wouters.
- Integration into the CPython build system is obviously different from
building a standalone zoneinfo module wheel.
- This includes configuration to install the tzdata package as part of
CI, though only on the coverage jobs. Introducing a PyPI dependency as
part of the CI build was controversial, and this is seen as less of a
major change, since the coverage jobs already depend on pip and PyPI.
Additional changes that were introduced as part of this PR, most / all of
which were backported to the reference implementation:
- Fixed reference and memory leaks
With much debugging help from Pablo Galindo
- Added smoke tests ensuring that the C and Python modules are built
The import machinery can be somewhat fragile, and the "seamlessly falls
back to pure Python" nature of this module makes it so that a problem
building the C extension or a failure to import the pure Python version
might easily go unnoticed.
- Adjustments to zoneinfo.__dir__
Suggested by Petr Viktorin.
- Slight refactorings as suggested by Steve Dower.
- Removed unnecessary if check on std_abbr
Discovered this because of a missing line in branch coverage.
Clarify the zip built-in docstring.
This puts much simpler text up front along with an example.
As it was, the zip built-in docstring was technically correct. But too
technical for the reader who shouldn't _need_ to know about `__next__` and
`StopIteration` as most people do not need to understand the internal
implementation details of the iterator protocol in their daily life.
This is a documentation only change, intended to be backported to 3.8; it is
only tangentially related to PEP-618 which might offer new behavior options
in the future.
Wording based a bit more on enumerate per Brandt's suggestion.
This gets rid of the legacy wording paragraph which seems too tied to
implementation details of the iterator protocol which isn't relevant here.
Co-authored-by: Brandt Bucher <brandtbucher@gmail.com>
Currently, if asyncio.wait_for() timeout expires, it cancels
inner future and then always raises TimeoutError. In case
those future is task, it can handle cancelation mannually,
and those process can lead to some other exception. Current
implementation silently loses thoses exception.
To resolve this, wait_for will check was the cancelation
successfull or not. In case there was exception, wait_for
will reraise it.
Co-authored-by: Roman Skurikhin <roman.skurikhin@cruxlab.com>
distutils.tests now saves/restores warnings filters to leave them
unchanged. Importing tests imports docutils which imports
pkg_resources which adds a warnings filter.
This fixes both the traceback.py module and the C code for formatting syntax errors (in Python/pythonrun.c). They now both consistently do the following:
- Suppress caret if it points left of text
- Allow caret pointing just past end of line
- If caret points past end of line, clip to *just* past end of line
The syntax error formatting code in traceback.py was mostly rewritten; small, subtle changes were applied to the C code in pythonrun.c.
There's still a difference when the text contains embedded newlines. Neither handles these very well, and I don't think the case occurs in practice.
Automerge-Triggered-By: @gvanrossum
This commit fixes the new parser to disallow invalid targets in the
following scenarios:
- Augmented assignments must only accept a single target (Name,
Attribute or Subscript), but no tuples or lists.
- `except` clauses should only accept a single `Name` as a target.
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
compileall is now able to use hardlinks to prevent duplicates in a
case when .pyc files for different optimization levels have the same content.
Co-authored-by: Miro Hrončok <miro@hroncok.cz>
Co-authored-by: Victor Stinner <vstinner@python.org>
raw_data_manager (default for EmailPolicy, EmailMessage)
does correct wrapping of 'text' parts as long as the message contains
characters outside of 7bit US-ASCII set: base64 or qp
Content-Transfer-Encoding is applied if the lines would be too long
without it. It did not, however, do this for ascii-only text,
which could result in lines that were longer than
policy.max_line_length or even the rfc 998 maximum.
This changeset fixes the heuristic so that if lines are longer than
policy.max_line_length, it will always apply a
content-transfer-encoding so that the lines are wrapped correctly.
The previous commits on bpo-29587 got exception chaining working
with gen.throw() in the `yield` case. This patch also gets the
`yield from` case working.
As a consequence, implicit exception chaining now also works in
the asyncio scenario of awaiting on a task when an exception is
already active.
Tests are included for both the asyncio case and the pure
generator-only case.
This commit fixes SyntaxError locations when the caret is not displayed,
by doing the following:
- `col_number` always gets set to the location of the offending
node/expr. When no caret is to be displayed, this gets achieved
by setting the object holding the error line to None.
- Introduce a new function `_PyPegen_raise_error_known_location`,
which can be called, when an arbitrary `lineno`/`col_offset`
needs to be passed. This function then gets used in the grammar
(through some new macros and inline functions) so that SyntaxError
locations of the new parser match that of the old.
In translate(), generate unique group names across calls.
The restores the undocumented ability to get a valid regexp
by joining multiple translate() results via `|`.
With the new parser, the error message contains always the trailing
newlines, causing the comparison of the repr of the error messages
in codeop to fail. This commit makes the new parser mirror the old parser's
behaviour regarding trailing newlines.
This is for the C generator:
- Disallow rule and variable names starting with `_`
- Rename most local variable names generated by the parser to start with `_`
Exceptions:
- Renaming `p` to `_p` will be a separate PR
- There are still some names that might clash, e.g.
- anything starting with `Py`
- C reserved words (`if` etc.)
- Macros like `EXTRA` and `CHECK`
* bpo-39791: Update importlib.resources to support files() API (importlib_resources 1.5).
* 📜🤖 Added by blurb_it.
* Add some documentation about the new objects added.
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
(Note: PEP 554 is not accepted and the implementation in the code base is a private one for use in the test suite.)
If code running in a subinterpreter raises an uncaught exception then the "run" call in the calling interpreter fails. A RunFailedError is raised there that summarizes the original exception as a string. The actual exception type, __cause__, __context__, state, etc. are all discarded. This turned out to be functionally insufficient in practice. There is a more helpful solution (and PEP 554 has been updated appropriately).
This change adds the exception propagation behavior described in PEP 554 to the _xxsubinterpreters module. With this change a copy of the original exception is set to __cause__ on the RunFailedError. For now we are using "pickle", which preserves the exception's state. We also preserve the original __cause__, __context__, and __traceback__ (since "pickle" does not preserve those).
https://bugs.python.org/issue32604
Module C state is now accessible from C-defined heap type methods (PEP 573).
Patch by Marcel Plch and Petr Viktorin.
Co-authored-by: Marcel Plch <mplch@redhat.com>
Co-authored-by: Victor Stinner <vstinner@python.org>
When parsing something like `f(g()=2)`, where the name of a default arg
is not a NAME, but an arbitrary expression, a specialised error message
is emitted.
When parsing a string with an invalid escape, the old parser used to
point to the beginning of the invalid string. This commit changes the new
parser to match that behaviour, since it's currently pointing to the
end of the string (or to be more precise, to the beginning of the next
token).
Make the design more object-oriented.
Split _GenericAlias on two almost independent classes: for special
generic aliases like List and for parametrized generic aliases like List[int].
Add specialized subclasses for Callable, Callable[...], Tuple and Union[...].
_PyErr_ChainExceptions() now ensures that the first parameter is an
exception type, as done by _PyErr_SetObject().
* The following function now check PyExceptionInstance_Check() in an
assertion using a new _PyBaseExceptionObject_cast() helper
function:
* PyException_GetTraceback(), PyException_SetTraceback()
* PyException_GetCause(), PyException_SetCause()
* PyException_GetContext(), PyException_SetContext()
* PyExceptionClass_Name() now checks PyExceptionClass_Check() with an
assertion.
* Remove XXX comment and add gi_exc_state variable to _gen_throw().
* Remove comment from test_generators
Due to backwards compatibility concerns regarding keywords immediately followed by a string without whitespace between them (like in `bg="#d00" if clear else"#fca"`) will fail to parse,
commit 41d5b94af4 has to be reverted.
When parsing things like `def f(*): pass` the old parser used to output `SyntaxError: named arguments must follow bare *`, which the new parser wasn't able to do.
This is a follow-up to GH-19823 that removes the check that the
exception value isn't NULL, prior to calling _PyErr_ChainExceptions().
This enables implicit exception chaining for gen.throw() in more
circumstances.
The commit also adds a test that a particular code snippet involving
gen.throw() doesn't crash. The test shows why the new
`gi_exc_state.exc_type != Py_None` check that was added is necessary.
Without the new check, the code snippet (as well as a number of other
tests) crashes on certain platforms (e.g. Fedora but not Mac).
Before this commit, if an exception was active inside a generator
when calling gen.throw(), that exception was lost (i.e. there was
no implicit exception chaining). This commit fixes that by
setting exc.__context__ when calling gen.throw(exc).
An isolated subinterpreter cannot spawn threads, spawn a child
process or call os.fork().
* Add private _Py_NewInterpreter(isolated_subinterpreter) function.
* Add isolated=True keyword-only parameter to
_xxsubinterpreters.create().
* Allow again os.fork() in "non-isolated" subinterpreters.
`ast.parse` and `compile` support a `feature_version` parameter that
tells the parser to parse the input string, as if it were written in
an older Python version.
The `feature_version` is propagated to the tokenizer, which uses it
to handle the three different stages of support for `async` and
`await`. Additionally, it disallows the following at parser level:
- The '@' operator in < 3.5
- Async functions in < 3.5
- Async comprehensions in < 3.6
- Underscores in numeric literals in < 3.6
- Await expression in < 3.5
- Variable annotations in < 3.6
- Async for-loops in < 3.5
- Async with-statements in < 3.5
- F-strings in < 3.6
Closeswe-like-parsers/cpython#124.
Before this commit, if an exception was active inside a generator
when calling gen.throw(), then that exception was lost (i.e. there
was no implicit exception chaining). This commit fixes that.
This implements full support for # type: <type> comments, # type: ignore <stuff> comments, and the func_type parsing mode for ast.parse() and compile().
Closes https://github.com/we-like-parsers/cpython/issues/95.
(For now, you need to use the master branch of mypy, since another issue unique to 3.9 had to be fixed there, and there's no mypy release yet.)
The only thing missing is `feature_version=N`, which is being tracked in https://github.com/we-like-parsers/cpython/issues/124.
Now that the default parser is the new PEG parser, ast.parse uses it, which means that we don't actually test something in test_peg_parser. This commit introduces a new keyword argument (`oldparser`) for `_peg_parser.parse_string` for specifying that a string needs to be parsed with the old parser. This keyword argument is used in the tests to actually compare the ASTs the new parser generates with those generated by the old parser.
Remove _random.Random.randbytes(): the C implementation of
randbytes(). Implement the method in Python to ease subclassing:
randbytes() now directly reuses getrandbits().
test.pythoninfo logs OpenSSL FIPS_mode() and Linux
/proc/sys/crypto/fips_enabled in a new "fips" section.
Co-Authored-By: Petr Viktorin <encukou@gmail.com>
After parsing is done in single statement mode, the tokenizer buffer has to be checked for additional lines and a `SyntaxError` must be raised, in case there are any.
Co-authored-by: Pablo Galindo <Pablogsal@gmail.com>
This allows the caller to avoid creation of an exception when the channel is empty (just like `dict.get()` works). `ChannelEmptyError` is still raised if no default is provided.
Automerge-Triggered-By: @ericsnowcurrently
An E_EOF error was only being caught after the parser exited before this commit. There are some cases though, where the tokenizer returns ERRORTOKEN *and* has set an E_EOF error (like when EOF directly follows a line continuation character) which weren't correctly handled before.
Now only test_error_during_result_unpickle_in_result_handler()
captures and ignores sys.stderr in the test process.
Tools like test.bisect_cmd don't support subTest() but only
work with the granularity of one method.
Remove unused ExecutorDeadlockTest._sleep_id() method.
This commit also allows to pass flags to the new parser in all interfaces and fixes a bug in the parser generator that was causing to inline rules with actions, making them disappear.
* Move socket related functions from test.support to socket_helper.
* Import socket, nntplib and urllib.error lazily in transient_internet().
* Remove importing multiprocess.
Previously every test was building an extension module and
loading it into sys.modules. The tearDown function was thus
not able to clean up correctly, resulting in memory leaks.
With this commit, every test function now builds the extension
module and runs the actual test code in a new process
(using assert_python_ok), so that sys.modules stays intact
and no memory gets leaked.
Log "Warning -- ..." test warnings into sys.__stderr__ rather than
sys.stderr, to ensure to display them even if sys.stderr is captured.
test.libregrtest.utils.print_warning() now calls
test.support.print_warning().
* Rename PyConfig.use_peg to _use_peg_parser
* Document PyConfig._use_peg_parser and mark it a deprecated
* Mark -X oldparser option and PYTHONOLDPARSER env var as deprecated
in the documentation.
* Add use_old_parser() and skip_if_new_parser() to test.support
* Remove sys.flags.use_peg: use_old_parser() uses
_testinternalcapi.get_configs() instead.
* Enhance test_embed tests
* subprocess._args_from_interpreter_flags() copies -X oldparser
Added str.removeprefix and str.removesuffix methods and corresponding
bytes, bytearray, and collections.UserString methods to remove affixes
from a string if present. See PEP 616 for a full description.
The constant values of future flags in the __future__ module
is updated in order to prevent collision with compiler flags.
Previously PyCF_ALLOW_TOP_LEVEL_AWAIT was clashing
with CO_FUTURE_DIVISION.
Fix the Windows implementation of os.waitpid() for exit code
larger than "INT_MAX >> 8". The exit status is now interpreted as an
unsigned number.
os.waitstatus_to_exitcode() now accepts wait status larger than
INT_MAX.
It is possible to use either '-isysroot /some/path' (with a space) or
'-isysroot/some/path' (no space in between). Support both forms in
places where special handling of -isysroot is done, rather than just
the first form.
Co-authored-by: Ned Deily <nad@python.org>
Avoid linear runtime of ShareableList.__getitem__ and
ShareableList.__setitem__ by storing running allocated bytes in
ShareableList._allocated_bytes instead of the number of bytes for
a particular stored item.
Co-authored-by: Antoine Pitrou <antoine@python.org>
* Use ast module to find class definition
* Add NEWS entry
* Fix class with multiple children and move decorator code to the method
* Fix PR comments
1. Use node.decorator_list to select decorators
2. Remove unwanted variables in ClassVisitor
3. Simplify stack management as per review
* Add test for nested functions and async calls
* Fix pydoc test since comments are returned now correctly
* Set event loop policy as None to fix environment related change
* Refactor visit_AsyncFunctionDef and tests
* Refactor to use local variables and fix tests
* Add patch attribution
* Use self.addCleanup for asyncio
* Rename ClassVisitor to ClassFinder and fix asyncio cleanup
* Return first class inside conditional in case of multiple definitions. Remove decorator for class source.
* Add docstring to make the test correct
* Modify NEWS entry regarding decorators
* Return decorators too for bpo-15856
* Move ast and the class source code to top. Use proper Exception.
The uname binary on Android does not support -p [1]. Here is a sample
log:
```
0:06:03 load avg: 0.56 [254/421/8] test_platform failed -- running: test_asyncio (5 min 53 sec)
uname: Unknown option p (see "uname --help")
test test_platform failed -- Traceback (most recent call last):
File "/data/local/tmp/lib/python3.9/test/test_platform.py", line 170, in test_uname_processor
proc_res = subprocess.check_output(['uname', '-p'], text=True).strip()
File "/data/local/tmp/lib/python3.9/subprocess.py", line 420, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/data/local/tmp/lib/python3.9/subprocess.py", line 524, in run
raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command '['uname', '-p']' returned non-zero exit status 1.
```
[1] https://android.googlesource.com/platform/external/toybox/+/refs/heads/master/toys/posix/uname.c
Automerge-Triggered-By: @jaraco
Add random.randbytes() function and random.Random.randbytes()
method to generate random bytes.
Modify secrets.token_bytes() to use SystemRandom.randbytes()
rather than calling directly os.urandom().
Rename also genrand_int32() to genrand_uint32(), since it returns an
unsigned 32-bit integer, not a signed integer.
The _random module is now built with Py_BUILD_CORE_MODULE defined.
Add a new internal pycore_byteswap.h header file with the following
functions:
* _Py_bswap16()
* _Py_bswap32()
* _Py_bswap64()
Use these functions in _ctypes, sha256 and sha512 modules,
and also use in the UTF-32 encoder.
sha256, sha512 and _ctypes modules are now built with the internal
C API.
* Replace flag-flip indirection with direct inspection
* Use any for simpler code
* Avoid flag flip and set results directly.
* Resolve processor in a single function.
* Extract processor handling into a namespace (class)
* Remove _syscmd_uname, unused
* Restore platform.processor behavior to match prior expectation (reliant on uname -p in a subprocess).
* Extract '_unknown_as_blank' function.
* Override uname_result to resolve the processor late.
* Add a test intended to capture the expected values from 'uname -p'
* Instead of trying to keep track of all of the possible outputs on different systems (probably a fool's errand), simply assert that except for the known platform variance, uname().processor matches the output of 'uname -p'
* Use a skipIf directive
* Use contextlib.suppress to suppress the error. Inline strip call.
* 📜🤖 Added by blurb_it.
* Remove use of contextlib.suppress (it would fail with NameError if it had any effect). Rely on _unknown_as_blank to replace unknown with blank.
Co-authored-by: blurb-it[bot] <blurb-it[bot]@users.noreply.github.com>
* bpo-35967: Make test more lenient to satisfy build bots.
* Update Lib/test/test_platform.py
Co-Authored-By: Kyle Stanley <aeros167@gmail.com>
* Expect '' for 'unknown'
Co-authored-by: Kyle Stanley <aeros167@gmail.com>
* Add a test intended to capture the expected values from 'uname -p'
* Instead of trying to keep track of all of the possible outputs on different systems (probably a fool's errand), simply assert that except for the known platform variance, uname().processor matches the output of 'uname -p'
* Use a skipIf directive
* Use contextlib.suppress to suppress the error. Inline strip call.
When there is a SyntaxError after reading the last input character from
the tokenizer and if no newline follows it, the error message used to be
`unexpected EOF while parsing`, which is wrong.
Add the encoding in ftplib.FTP and ftplib.FTP_TLS to the
constructor as keyword-only and change the default from "latin-1" to "utf-8"
to follow RFC 2640.
Fix a hang at fork in the logging module: the new private
_at_fork_reinit() method is now used to reinitialize locks at fork in
the child process.
The createLock() method is no longer used at fork.
Move the PyGC_Head structure and the following private macros to the
internal C API:
* _PyGCHead_FINALIZED()
* _PyGCHead_NEXT()
* _PyGCHead_PREV()
* _PyGCHead_SET_FINALIZED()
* _PyGCHead_SET_NEXT()
* _PyGCHead_SET_PREV()
* _PyGC_FINALIZED()
* _PyGC_PREV_MASK
* _PyGC_PREV_MASK_COLLECTING
* _PyGC_PREV_MASK_FINALIZED
* _PyGC_PREV_SHIFT
* _PyGC_SET_FINALIZED()
* _PyObject_GC_IS_TRACKED()
* _PyObject_GC_MAY_BE_TRACKED()
* _Py_AS_GC(o)
Keep the private _PyGC_FINALIZED() macro in the public C API for
backward compatibility with Python 3.8: make it an alias to the new
PyObject_GC_IsFinalized() function.
Move the SIZEOF_PYGC_HEAD constant from _testcapi module to
_testinternalcapi module.
* bpo-39011: Preserve line endings within attributes
Line endings within attributes were previously normalized to "\n" in Py3.7/3.8.
This patch removes that normalization, as line endings which were
replaced by entity numbers should be preserved in original form.
Add a private _at_fork_reinit() method to _thread.Lock,
_thread.RLock, threading.RLock and threading.Condition classes:
reinitialize the lock after fork in the child process; reset the lock
to the unlocked state.
Rename also the private _reset_internal_locks() method of
threading.Event to _at_fork_reinit().
* Add _PyThread_at_fork_reinit() private function. It is excluded
from the limited C API.
* threading.Thread._reset_internal_locks() now calls
_at_fork_reinit() on self._tstate_lock rather than creating a new
Python lock object.
This implements things like `list[int]`,
which returns an object of type `types.GenericAlias`.
This object mostly acts as a proxy for `list`,
but has attributes `__origin__` and `__args__`
that allow recovering the parts (with values `list` and `(int,)`.
There is also an approximate notion of type variables;
e.g. `list[T]` has a `__parameters__` attribute equal to `(T,)`.
Type variables are objects of type `typing.TypeVar`.
test_builtin.PtyTests now registers an handler for SIGHUP signal.
Closing the PTY file descriptor can emit a SIGHUP signal: just ignore
it.
run_child() now also closes the PTY file descriptor before waiting
for the process completition, otherwise the test hangs on AIX.
There are two copies of the grammar -- the one used by Python itself as
Grammar/Grammar, and the one used by lib2to3 which has necessarily diverged at
Lib/lib2to3/Grammar.txt because it needs to support older syntax an we want it
to be reasonable stable to avoid requiring fixer rewrites.
This brings suport for syntax like `if x:= foo():` to match what the live
Python grammar does.
This should've been added at the time of the walrus operator itself, but lib2to3 being
independent is often overlooked. So we do consider this a bugfix rather than enhancement.
CGIHTTPRequestHandler of http.server now logs the CGI script exit
code, rather than the CGI script exit status of os.waitpid().
For example, if the script is killed by signal 11, it now logs:
"CGI script exit code -11."
The AbstractBasicAuthHandler class of the urllib.request module uses
an inefficient regular expression which can be exploited by an
attacker to cause a denial of service. Fix the regex to prevent the
catastrophic backtracking. Vulnerability reported by Ben Caller
and Matt Schwager.
AbstractBasicAuthHandler of urllib.request now parses all
WWW-Authenticate HTTP headers and accepts multiple challenges per
header: use the realm of the first Basic challenge.
Co-Authored-By: Serhiy Storchaka <storchaka@gmail.com>
Add os.waitstatus_to_exitcode() function to convert a wait status to an
exitcode.
Suggest waitstatus_to_exitcode() usage in the documentation when
appropriate.
Use waitstatus_to_exitcode() in:
* multiprocessing, os, subprocess and _bootsubprocess modules;
* test.support.wait_process();
* setup.py: run_command();
* and many tests.
Running `test_socket` or anything that depends on it (like python -m
test.pythoninfo) crashes if IOCTL_VM_SOCKETS_GET_LOCAL_CID does not
exist in the socket module.
Automerge-Triggered-By: @pablogsal
* Add _waitstatus_to_exitcode() helper function to _bootsubprocess.
* Enhance check_output() error message if the command fails.
_bootsubprocess no longer handles WIFSTOPPED() case: it now raises a
ValueError.
Serhiy Storchaka
Victor Stinner
Christian Heimes
Jürgen Gmach
Guido van Rossum
Lysandros Nikolaou
Bar Harel
stratakis
Eric Snow
David Szotten
Xavier Fernandez
Krzysztof Konopko
roger
Rémi Lapeyre
Pablo Galindo
Fantix King
Raymond Hettinger
An Long
Dennis Sweeney
native-api
MARK SCHWAB
kernc
Hai Shi
Joannah Nanjekye
Sandro Mani
Jason R. Coombs
scoder
Batuhan Taskaya
Stefan Krah
Furkan Önder
Cheryl Sabella
aboddie
Jeremy Attali
Srinivas Reddy Thatiparthy (శ్రీనివాస్ రెడ్డి తాటిపర్తి)
Sanyam Khurana
Mark Shannon
Batuhan Taskaya
Kyle Stanley
Terry Jan Reedy
Niklas Fiekas
Paul Ganssle
Mark Dickinson
Abhilash Raj
Erlend Egeberg Aasland
Shantanu
Sean Gillespie
Arturo Escaip
idomic
Rotuna
Miro Hrončok
Zackery Spytz
Dong-hee Na
Florian Dahlitz
Ville Skyttä
Chris Jerdonek
Huon Wilson
Kunal Bhalla
Jonathan Goble
CyberSaxosTiGER
Irit Katriel
Nathaniel J. Smith
Kjell Braden
Gregory P. Smith
romasku
Lumír 'Frenzy' Balhar
Arkadiusz Hiler
Michael Graczyk
Tzanetos Balitsaris
Steve Dower
Tim Peters
Brad Solomon
Petr Viktorin
Curtis Bucher
Sander
Noah Doersing
Jelle Zijlstra
lrjball
Vlad Serebrennikov
karl ding
Lewis Gaul
Karthikeyan Singaravelan
Ethan Onstott
Łukasz Langa
Nickolena Fisher
Carl Meyer
Anthony Sottile
Joshua Root
HongWeipeng
Antoine Pitrou
Barry
Galden
Tim Hoffmann
Thomas Krennwallner
Hakan Çelik
Chih-Hsuan Yen
Barney Gale
Mariusz Felisiak
Inada Naoki
Russell Davis
Ammar Askar
Ethan Smith
Sebastian Pedersen
Oren Milman
Alex Itkes
mefistotelis
pxinwr
Zachary Ware
Tal Einat
Michael Felt
Tim Hatch
Derek Keeler