* Add _PyRuntime.pre_initialized: set to 1 when Python
is pre-initialized
* Add _Py_PreInitialize() and _Py_PreInitializeFromPreConfig().
* _PyCoreConfig_Read() now calls _Py_PreInitialize().
* Move _PyPreConfig_GetGlobalConfig() and
_PyCoreConfig_GetGlobalConfig() calls from main.c to preconfig.c
and coreconfig.c.
Calling _PyRuntime_Initialize() after _PyRuntime_Finalize() now re-initializes
_PyRuntime structure. Previously, _PyRuntime_Initialize() did
nothing in that case.
* _PyPathConfig_ComputeSysPath0() now returns 0 if argv is empty.
* Cleanup also _PyPathConfig_ComputeSysPath0() code: move variables
definitions closer to where they are used.
At Python initialization, the current directory is no longer
prepended to sys.path if it has been removed.
Rename _PyPathConfig_ComputeArgv0() to
_PyPathConfig_ComputeSysPath0() to avoid confusion between argv[0]
and sys.path[0].
Python initialization now fails if decoding pybuilddir.txt
configuration file fails at startup.
_PyPathConfig_Calculate() now reports memory allocation failure and
decoding error on decoding pybuilddir.txt content from
UTF-8/surrogateescape.
The last parameter of _Py_wreadlink(), _Py_wrealpath() and
_Py_wgetcwd() is a length, not a size: number of characters including
the trailing NUL character.
Enhance also documentation of error conditions.
The function has no return value.
Fix the following warning on Windows:
python\ceval.c(180): warning C4098: 'PyEval_InitThreads':
'void' function returning a value
Replace messy _Py_wstrlist_xxx() functions with a new clean
_PyWstrList structure and new _PyWstrList_xxx() functions.
Changes:
* Add _PyCoreConfig.use_module_search_paths to decide if
_PyCoreConfig.module_search_paths should be computed or not, to
support empty search path list.
* _PyWstrList_Clear() sets length to 0 and items to NULL, whereas
_Py_wstrlist_clear() only freed memory.
* _PyWstrList_Append() returns an int, whereas _Py_wstrlist_append()
returned _PyInitError.
* _PyWstrList uses Py_ssize_t for the length, instead of int.
* Replace (int, wchar_t**) with _PyWstrList in:
* _PyPreConfig
* _PyCoreConfig
* _PyPreCmdline
* _PyCmdline
* Replace "int orig_argv; wchar_t **orig_argv;"
with "_PyWstrList orig_argv".
* _PyCmdline and _PyPreCmdline now also copy wchar_argv.
* Rename _PyArgv_Decode() to _PyArgv_AsWstrList().
* PySys_SetArgvEx() now pass the fixed (argc, argv) to
_PyPathConfig_ComputeArgv0() (don't pass negative argc or NULL
argv).
* _PyOS_GetOpt() uses Py_ssize_t
The value is a string for string and byte literals, None otherwise.
It is 'u' for u"..." literals, 'b' for b"..." literals, '' for "..." literals.
The 'r' (raw) prefix is ignored.
Does not apply to f-strings.
This appears sufficient to make mypy capable of using the stdlib ast module instead of typed_ast (assuming a mypy patch I'm working on).
WIP: I need to make the tests pass. @ilevkivskyi @serhiy-storchaka
https://bugs.python.org/issue36280
Fix an unlikely memory leak on conversion from string to float in the
function _Py_dg_strtod() used by float(str), complex(str),
pickle.load(), marshal.load(), etc.
Fix an unlikely memory leak in _Py_dg_strtod() on "undfl:" label:
rewrite memory management in this function to always release all
memory before exiting the function. Initialize variables to NULL, and
set them to NULL after calling Bfree() at the "cont:" label.
Note: Bfree(NULL) is well defined: it does nothing.
d_initial, the first state of a particular DFA in the parser has always been initialized to 0 in the old pgen as well as the new pgen. As this value is not used and the first state of each DFA is assumed to be the first element in the array representing it, remove d_initial from the parser to reduce complexity.
This adds a `feature_version` flag to `ast.parse()` (documented) and `compile()` (hidden) that allow tweaking the parser to support older versions of the grammar. In particular if `feature_version` is 5 or 6, the hacks for the `async` and `await` keyword from PEP 492 are reinstated. (For 7 or higher, these are unconditionally treated as keywords, but they are still special tokens rather than `NAME` tokens that the parser driver recognizes.)
https://bugs.python.org/issue35975
bpo-34247, bpo-36142: The PYTHONMALLOC environment variable has the
priority over PYTHONDEV env var and "-X dev" command line option.
For example, PYTHONMALLOC=malloc PYTHONDEVMODE=1 sets the memory
allocators to "malloc" (and not to "debug").
Add an unit test.
* _PyPreConfig_Read() now sets temporarily LC_CTYPE to the user
preferred locale, as _PyPreConfig_Write() will do permanentely.
* Fix _PyCoreConfig_Clear(): clear run_xxx attributes
* _Py_SetArgcArgv() doesn't have to be exported
* _PyCoreConfig_SetGlobalConfig() no longer applies preconfig
* _PyPreConfig_Write() now reallocates the pre-configuration with the
new memory allocator.
* It is no longer needed to force the "default raw memory allocator"
to clear pre-configuration and core configuration. Simplify the
code.
* _PyPreConfig_Write() now does nothing if called after
Py_Initialize(): no longer check if the allocator is the same.
* Remove _PyMem_GetDebugAllocatorsName(): dev mode sets again
allocator to "debug".
* _PyPreConfig_Write() now sets the memory allocator.
* _PyPreConfig_Write() gets a return type: _PyInitError.
* _Py_InitializeCore() now reads and writes the pre-configuration
(set the memory allocator, configure the locale) before reading and
writing the core configuration.
The development mode now uses the effective name of the debug memory
allocator ("pymalloc_debug" or "malloc_debug"). So the name doesn't
change after setting the memory allocator.
* Move 'allocator' and 'dev_mode' fields from _PyCoreConfig
to _PyPreConfig.
* Fix InitConfigTests of test_embed: dev_mode sets allocator to
"debug", add a new tests for env vars with dev mode enabled.
* Move following fields from _PyCoreConfig to _PyPreConfig:
* coerce_c_locale
* coerce_c_locale_warn
* legacy_windows_stdio
* utf8_mode
* _PyPreConfig_ReadFromArgv() is now responsible to choose the
filesystem encoding
* _PyPreConfig_Write() now sets the LC_CTYPE locale
* Add _PyPreConfig structure
* Move 'ignored' and 'use_environment' fields from _PyCoreConfig
to _PyPreConfig
* Add a new "_PyPreConfig preconfig;" field to _PyCoreConfig
* Revert "bpo-36097: Use only public C-API in the_xxsubinterpreters module (adding as necessary). (#12003)"
This reverts commit bcfa450f21.
* Revert "bpo-33608: Simplify ceval's DISPATCH by hoisting eval_breaker ahead of time. (gh-12062)"
This reverts commit bda918bf65.
* Revert "bpo-33608: Use _Py_AddPendingCall() in _PyCrossInterpreterData_Release(). (gh-12024)"
This reverts commit b05b711a2c.
* Revert "bpo-33608: Factor out a private, per-interpreter _Py_AddPendingCall(). (GH-11617)"
This reverts commit ef4ac967e2.
Use UTF-8 as the system encoding on VxWorks.
The main reason are:
1. The locale is frequently misconfigured.
2. Missing some functions to deal with locale in VxWorks C library.
Pgen is the oldest piece of technology in the CPython repository, building it requires various #if[n]def PGEN hacks in other parts of the code and it also depends more and more on CPython internals. This commit removes the old pgen C code and replaces it for a new version implemented in pure Python. This is a modified and adapted version of lib2to3/pgen2 that can generate grammar files compatibles with the current parser.
This commit also eliminates all the #ifdef and code branches related to pgen, simplifying the code and making it more maintainable. The regen-grammar step now uses $(PYTHON_FOR_REGEN) that can be any version of the interpreter, so the new pgen code maintains compatibility with older versions of the interpreter (this also allows regenerating the grammar with the current CI solution that uses Python3.5). The new pgen Python module also makes use of the Grammar/Tokens file that holds the token specification, so is always kept in sync and avoids having to maintain duplicate token definitions.
* Add _PyCoreConfig_ReadFromArgv() function which parses command line
options: move code from main.c to coreconfig.c.
* Add _PyCoreConfig_Write() to write the new configuration: coerce
the LC_CTYPE locale, set Py_xxx global configuration variables,
etc.
* _PyCoreConfig_ReadFromArgv() now only changes the LC_CTYPE locale
temporarily. _PyCoreConfig_Write() becomes responsible to set the
LC_CTYPE locale.
* Add _Py_SetArgcArgv() and _Py_ClearArgcArgv() functions
* Rename many "pymain_xxx()" functions
* Add "const" to some function parameters
* Reorganize main.c to declare functions in the order in which they
are called.
* Move fields from _PyMain to _PyCoreConfig:
* skip_first_line
* run_command
* run_module
* run_filename
* Replace _PyMain.stdin_is_interactive with a new
stdin_is_interactive(config) function
* Rename _PyMain to _PyArgv. Add "const _PyArgv *args" field
to _PyCmdline.
Add a new _Py_INIT_EXIT() macro to be able to exit Python with an
exitcode using _PyInitError API. Rewrite function calls by
pymain_main() to use _PyInitError.
Changes:
* Remove _PyMain.err and _PyMain.status field
* Add _Py_INIT_EXIT() macro and _PyInitError.exitcode field.
* Rename _Py_FatalInitError() to _Py_ExitInitError().
The whole coreconfig.h header is now excluded from Py_LIMITED_API.
Move functions definitions into a new internal pycore_coreconfig.h
header.
* Move Include/coreconfig.h to Include/cpython/coreconfig.h
* coreconfig.h header is now excluded from Py_LIMITED_API
* Move functions to pycore_coreconfig.h
Ensure that the main interpreter is active (in the main thread) for signal-handling operations. This is increasingly relevant as people use subinterpreters more.
https://bugs.python.org/issue35724
Trying to assign a value to __debug__ using the assignment operator is supposed to fail, but
a missing check for forbidden names when setting the context in the ast was preventing this behaviour.
Explicitly reinitialize this every eval *just in case* someone is
calling into an embedded Python where they don't care about an uncaught
KeyboardInterrupt exception (why didn't they leave
`config.install_signal_handlers` set to `0`?!?) but then later call
`Py_Main()` itself (which *checks* this flag and dies with a signal after
its interpreter exits). We don't want a previous embedded interpreter's
uncaught exception to trigger an unexplained signal exit from a future
`Py_Main()` based one.
* bpo-1054041: Exit properly by a signal after a ^C.
An uncaught KeyboardInterrupt exception means the user pressed ^C and
our code did not handle it. Programs that install SIGINT handlers are
supposed to reraise the SIGINT signal to the SIG_DFL handler in order
to exit in a manner that their calling process can detect that they
died due to a Ctrl-C. https://www.cons.org/cracauer/sigint.html
After this change on POSIX systems
while true; do python -c 'import time; time.sleep(23)'; done
can be stopped via a simple Ctrl-C instead of the shell infinitely
restarting a new python process.
What to do on Windows, or if anything needs to be done there has not
yet been determined. That belongs in its own PR.
TODO(gpshead): A unittest for this behavior is still needed.
* Do the unhandled ^C check after pymain_free.
* Return STATUS_CONTROL_C_EXIT on Windows.
* Fix ifdef around unistd.h include.
* 📜🤖 Added by blurb_it.
* Add STATUS_CTRL_C_EXIT to the os module on Windows
* Add unittests.
* Don't send CTRL_C_EVENT in the Windows test.
It was causing CI systems to bail out of the entire test suite.
See https://dev.azure.com/Python/cpython/_build/results?buildId=37980
for example.
* Correct posix test (fail on macOS?) check.
* STATUS_CONTROL_C_EXIT must be unsigned.
* Improve the error message.
* test typo :)
* Skip if the bash version is too old.
...and rename the windows test to reflect what it does.
* min bash version is 4.4, detect no bash.
* restore a blank line i didn't mean to delete.
* PyErr_Occurred() before the Py_DECREF(co);
* Don't add os.STATUS_CONTROL_C_EXIT as a constant.
* Update the Windows test comment.
* Refactor common logic into a run_eval_code_obj fn.
* bpo-35321: Set the spec origin to frozen in frozen modules
This fix correctly sets the spec origin to
"frozen" for the _frozen_importlib module. Note that the
origin was already correctly set in _frozen_importlib_external.
* 📜🤖 Added by blurb_it.
Unicode version of Windows APIs are used in places, but not for GetVersionEx in Python/sysmodule.c
The wcstok_s is called on Windows in Modules/main.c and PC/launcher.c, but not in Python/pathconfig.c
LoadLibrary, GetProcAddress, FreeLibrary and GetModuleHandle acquire the system loader lock. Calling these while holding the GIL will cause a deadlock on the rare occasion that another thread is detaching and needs to destroy its thread state at the same time.
* Add tokenization of :=
- Add token to Include/token.h. Add token to documentation in Doc/library/token.rst.
- Run `./python Lib/token.py` to regenerate Lib/token.py.
- Update Parser/tokenizer.c: add case to handle `:=`.
* Add initial usage of := in grammar.
* Update Python.asdl to match the grammar updates. Regenerated Include/Python-ast.h and Python/Python-ast.c
* Update AST and compiler files in Python/ast.c and Python/compile.c. Basic functionality, this isn't scoped properly
* Regenerate Lib/symbol.py using `./python Lib/symbol.py`
* Tests - Fix failing tests in test_parser.py due to changes in token numbers for internal representation
* Tests - Add simple test for := token
* Tests - Add simple tests for named expressions using expr and suite
* Tests - Update number of levels for nested expressions to prevent stack overflow
* Update symbol table to handle NamedExpr
* Update Grammar to allow assignment expressions in if statements.
Regenerate Python/graminit.c accordingly using `make regen-grammar`
* Tests - Add additional tests for named expressions in RoundtripLegalSyntaxTestCase, based on examples and information directly from PEP 572
Note: failing tests are currently commented out (4 out of 24 tests currently fail)
* Tests - Add temporary syntax test failure tests in test_parser.py
Note: There is an outstanding TODO for this -- syntax tests need to be
moved to a different file (presumably test_syntax.py), but this is
covering what needs to be tested at the moment, and it's more convenient
to run a single test for the time being
* Add support for allowing assignment expressions as function argument annotations. Uncomment tests for these cases because they all pass now!
* Tests - Move existing syntax tests out of test_parser.py and into test_named_expressions.py. Refactor syntax tests to use unittest
* Add TargetScopeError exception to extend SyntaxError
Note: This simply creates the TargetScopeError exception, it is not yet
used anywhere
* Tests - Update tests per PEP 572
Continue refactoring test suite:
The named expression test suite now checks for any invalid cases that
throw exceptions (no longer limited to SyntaxErrors), assignment tests
to ensure that variables are properly assigned, and scope tests to
ensure that variable availability and values are correct
Note:
- There are still tests that are marked to skip, as they are not yet
implemented
- There are approximately 300 lines of the PEP that have not yet been
addressed, though these may be deferred
* Documentation - Small updates to XXX/todo comments
- Remove XXX from child description in ast.c
- Add comment with number of previously supported nested expressions for
3.7.X in test_parser.py
* Fix assert in seq_for_testlist()
* Cleanup - Denote "Not implemented -- No keyword args" on failing test case. Fix PEP8 error for blank lines at beginning of test classes in test_parser.py
* Tests - Wrap all file opens in `with...as` to ensure files are closed
* WIP: handle f(a := 1)
* Tests and Cleanup - No longer skips keyword arg test. Keyword arg test now uses a simpler test case and does not rely on an external file. Remove print statements from ast.c
* Tests - Refactor last remaining test case that relied on on external file to use a simpler test case without the dependency
* Tests - Add better description of remaning skipped tests. Add test checking scope when using assignment expression in a function argument
* Tests - Add test for nested comprehension, testing value and scope. Fix variable name in skipped comprehension scope test
* Handle restriction of LHS for named expressions - can only assign to LHS of type NAME. Specifically, restrict assignment to tuples
This adds an alternative set_context specifically for named expressions,
set_namedexpr_context. Thus, context is now set differently for standard
assignment versus assignment for named expressions in order to handle
restrictions.
* Tests - Update negative test case for assigning to lambda to match new error message. Add negative test case for assigning to tuple
* Tests - Reorder test cases to group invalid syntax cases and named assignment target errors
* Tests - Update test case for named expression in function argument - check that result and variable are set correctly
* Todo - Add todo for TargetScopeError based on Guido's comment (2b3acd37bd (r30472562))
* Tests - Add named expression tests for assignment operator in function arguments
Note: One of two tests are skipped, as function arguments are currently treating
an assignment expression inside of parenthesis as one child, which does
not properly catch the named expression, nor does it count arguments
properly
* Add NamedStore to expr_context. Regenerate related code with `make regen-ast`
* Add usage of NamedStore to ast_for_named_expr in ast.c. Update occurances of checking for Store to also handle NamedStore where appropriate
* Add ste_comprehension to _symtable_entry to track if the namespace is a comprehension. Initialize ste_comprehension to 0. Set set_comprehension to 1 in symtable_handle_comprehension
* s/symtable_add_def/symtable_add_def_helper. Add symtable_add_def to handle grabbing st->st_cur and passing it to symtable_add_def_helper. This now allows us to call the original code from symtable_add_def by instead calling symtable_add_def_helper with a different ste.
* Refactor symtable_record_directive to take lineno and col_offset as arguments instead of stmt_ty. This allows symtable_record_directive to be used for stmt_ty and expr_ty
* Handle elevating scope for named expressions in comprehensions.
* Handle error for usage of named expression inside a class block
* Tests - No longer skip scope tests. Add additional scope tests
* Cleanup - Update error message for named expression within a comprehension within a class. Update comments. Add assert for symtable_extend_namedexpr_scope to validate that we always find at least a ModuleScope if we don't find a Class or FunctionScope
* Cleanup - Add missing case for NamedStore in expr_context_name. Remove unused var in set_namedexpr_content
* Refactor - Consolidate set_context and set_namedexpr_context to reduce duplicated code. Special cases for named expressions are handled by checking if ctx is NamedStore
* Cleanup - Add additional use cases for ast_for_namedexpr in usage comment. Fix multiple blank lines in test_named_expressions
* Tests - Remove unnecessary test case. Renumber test case function names
* Remove TargetScopeError for now. Will add back if needed
* Cleanup - Small comment nit for consistency
* Handle positional argument check with named expression
* Add TargetScopeError exception definition. Add documentation for TargetScopeError in c-api docs. Throw TargetScopeError instead of SyntaxError when using a named expression in a comprehension within a class scope
* Increase stack size for parser by 200. This is a minimal change (approx. 5kb) and should not have an impact on any systems. Update parser test to allow 99 nested levels again
* Add TargetScopeError to exception_hierarchy.txt for test_baseexception.py_
* Tests - Major update for named expression tests, both in test_named_expressions and test_parser
- Add test for TargetScopeError
- Add tests for named expressions in comprehension scope and edge cases
- Add tests for named expressions in function arguments (declarations
and call sites)
- Reorganize tests to group them more logically
* Cleanup - Remove unnecessary comment
* Cleanup - Comment nitpicks
* Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)
- Add check for LHS types to detect a parenthesis then a name (see note)
- Add test for this scenario
- Update tests for changed error message for named assignment to a tuple
(also, see note)
Note: This caused issues with the previous error handling for named assignment
to a LHS that contained an expression, such as a tuple. Thus, the check
for the LHS of a named expression must be changed to be more specific if
we wish to maintain the previous error messages
* Cleanup - Wrap lines more strictly in test file
* Revert "Explicitly disallow assignment expressions to a name inside parentheses, e.g.: ((x) := 0)"
This reverts commit f1531400ca7d7a2d148830c8ac703f041740896d.
* Add NEWS.d entry
* Tests - Fix error in test_pickle.test_exceptions by adding TargetScopeError to list of exceptions
* Tests - Update error message tests to reflect improved messaging convention (s/can't/cannot)
* Remove cases that cannot be reached in compile.c. Small linting update.
* Update Grammar/Tokens to add COLONEQUAL. Regenerate all files
* Update TargetScopeError PRE_INIT and POST_INIT, as this was purposefully left out when fixing rebase conflicts
* Add NamedStore back and regenerate files
* Pass along line number and end col info for named expression
* Simplify News entry
* Fix compiler warning and explicity mark fallthrough
* Split _Py_InitializeCore_impl() into subfunctions: add multiple pycore_init_xxx() functions
* Preliminary sys.stderr is now set earlier to get an usable
sys.stderr ealier.
* Move code into _Py_Initialize_ReconfigureCore() to be able to call
it from _Py_InitializeCore().
* Split _PyExc_Init(): create a new _PyBuiltins_AddExceptions()
function.
* Call _PyExc_Init() earlier in _Py_InitializeCore_impl()
and new_interpreter() to get working exceptions earlier.
* _Py_ReadyTypes() now returns _PyInitError rather than calling
Py_FatalError().
* Misc code cleanup
* The PyByteArray_Init() and PyByteArray_Fini() functions have been
removed. They did nothing since Python 2.7.4 and Python 3.2.0, were
excluded from the limited API (stable ABI), and were not
documented.
* Move "_PyXXX_Init()" and "_PyXXX_Fini()" declarations from
Include/cpython/pylifecycle.h to
Include/internal/pycore_pylifecycle.h. Replace
"PyAPI_FUNC(TYPE)" with "extern TYPE".
* _PyExc_Init() now returns an error on failure rather than calling
Py_FatalError(). Move macros inside _PyExc_Init() and undefine them
when done. Rewrite macros to make them look more like statement:
add ";" when using them, add "do { ... } while (0)".
* _PyUnicode_Init() now returns a _PyInitError error rather than call
Py_FatalError().
* Move stdin check from _PySys_BeginInit() to init_sys_streams().
* _Py_ReadyTypes() now returns a _PyInitError error rather than
calling Py_FatalError().
The majority of this PR is tediously passing `end_lineno` and `end_col_offset` everywhere. Here are non-trivial points:
* It is not possible to reconstruct end positions in AST "on the fly", some information is lost after an AST node is constructed, so we need two more attributes for every AST node `end_lineno` and `end_col_offset`.
* I add end position information to both CST and AST. Although it may be technically possible to avoid adding end positions to CST, the code becomes more cumbersome and less efficient.
* Since the end position is not known for non-leaf CST nodes while the next token is added, this requires a bit of extra care (see `_PyNode_FinalizeEndPos`). Unless I made some mistake, the algorithm should be linear.
* For statements, I "trim" the end position of suites to not include the terminal newlines and dedent (this seems to be what people would expect), for example in
```python
class C:
pass
pass
```
the end line and end column for the class definition is (2, 8).
* For `end_col_offset` I use the common Python convention for indexing, for example for `pass` the `end_col_offset` is 4 (not 3), so that `[0:4]` gives one the source code that corresponds to the node.
* I added a helper function `ast.get_source_segment()`, to get source text segment corresponding to a given AST node. It is also useful for testing.
An (inevitable) downside of this PR is that AST now takes almost 25% more memory. I think however it is probably justified by the benefits.
This change separates the signal handling trigger in the eval loop from the "pending calls" machinery. There is no semantic change and the difference in performance is insignificant.
The change makes both components less confusing. It also eliminates the risk of changes to the pending calls affecting signal handling. This is particularly relevant for some upcoming pending calls changes I have in the works.
Use _PyArg_CheckPositional() and inlined code instead of
PyArg_UnpackTuple() and _PyArg_UnpackStack() if all parameters
are positional and use the "object" converter.
* Fix test_mktime on AIX by adding code to get mktime to behave the
same way as it does on other *nix systems
* Fix test_pthread_getcpuclickid in AIX by adjusting the test case
expectations when running on AIX in 32-bit mode
Patch by Michael Felt.
In _localemodule.c and selectmodule.c, remove dead code that would
cause double decrefs if run.
In addition, replace PyList_SetItem() with PyList_SET_ITEM() in cases
where a new list is populated and there is no possibility of an error.
In addition, check if the list changed size in the loop in array_array_fromlist().
Fix an undefined behaviour in the pthread implementation of
PyThread_start_new_thread(): add a function wrapper to always return
NULL.
Add pythread_callback struct and pythread_wrapper() to thread_pthread.h.
Fix invalid function cast warnings with gcc 8
for method conventions different from METH_NOARGS, METH_O and
METH_VARARGS excluding Argument Clinic generated code.
Fix invalid function cast warnings with gcc 8
for method conventions different from METH_NOARGS, METH_O and
METH_VARARGS in Argument Clinic generated code.
The lineno and col_offset attributes of AST nodes for list comprehensions,
generator expressions and tuples are now point to the opening parenthesis or
square brace. For tuples without parenthesis they point to the position
of the first item.
Fix str.format(), float.__format__() and complex.__format__() methods
for non-ASCII decimal point when using the "n" formatter.
Changes:
* Rewrite _PyUnicode_InsertThousandsGrouping(): it now requires
a _PyUnicodeWriter object for the buffer and a Python str object
for digits.
* Rename FILL() macro to unicode_fill(), convert it to static inline function,
add "assert(0 <= start);" and rework its code.
There are some same consts in a module. This commit merges them into
single instance. It reduces number of objects in memory after loading modules.
https://bugs.python.org/issue34100
bpo-34523, bpo-35290: C locale coercion now resets the Python
internal "force ASCII" mode. This change fix the filesystem encoding
on FreeBSD CURRENT, which has a new "C.UTF-8" locale, when
the UTF-8 mode is disabled.
Add _Py_ResetForceASCII(): _Py_SetLocaleFromEnv() now calls it.
When iterating using asdl_seq_LEN(), use 'Py_ssize_t' type instead of
'int' for the iterator variable, to avoid downcast on 64-bit platforms.
_Py_asdl_int_seq_new() now also ensures that the index is greater than
or equal to 0.
CryptGenRandom() maximum size is PY_DWORD_MAX, not INT_MAX.
Use DWORD type for the 'chunk' variable
Co-Authored-By: Jeremy Kloth <jeremy.kloth@gmail.com>
locale.localeconv() now sets temporarily the LC_CTYPE locale to the
LC_MONETARY locale if the two locales are different and monetary
strings are non-ASCII. This temporary change affects other threads.
Changes:
* locale.localeconv() can now set LC_CTYPE to LC_MONETARY to decode
monetary fields.
* Add LocaleInfo.grouping_buffer: copy localeconv() grouping string
since it can be replaced anytime if a different thread calls
localeconv().
* _Py_GetLocaleconvNumeric() now requires a "struct lconv *"
structure, so locale.localeconv() now longer calls localeconv()
twice. Moreover, the function now requires all arguments to be
non-NULL.
* Rename STATIC_LOCALE_INFO_INIT to LocaleInfo_STATIC_INIT.
* Move _Py_GetLocaleconvNumeric() definition from fileutils.h
to pycore_fileutils.h. pycore_fileutils.h now includes locale.h.
* The _locale module is now built with Py_BUILD_CORE defined.
* The _PySys_EndInit() function now copies the
config->module_search_path list, so config is longer modified when
sys.path is updated.
* config->warnoptions list and config->xoptions dict are also copied
* test_embed: InitConfigTests now also tests
main_config['module_search_path']
* Fix _Py_InitializeMainInterpreter(): don't use config->warnoptions
but sys.warnoptions to decide if the warnings module should
be imported at startup.
test_embed.InitConfigTests tests more configuration variables.
Changes:
* InitConfigTests tests more core configuration variables:
* base_exec_prefix
* base_prefix
* exec_prefix
* home
* legacy_windows_fs_encoding
* legacy_windows_stdio
* module_search_path_env
* prefix
* "_testembed init_from_config" tests more variables:
* argv
* warnoptions
* xoptions
* InitConfigTests: add check_global_config(), check_core_config() and
check_main_config() subfunctions to cleanup the code. Move also
constants at the class level (ex: COPY_MAIN_CONFIG).
* Fix _PyCoreConfig_AsDict(): don't set stdio_encoding twice
* Use more macros in _PyCoreConfig_AsDict() and
_PyMainInterpreterConfig_AsDict() to reduce code duplication.
* Other minor cleanups.
* Fix _PyCoreConfig_SetGlobalConfig(): set also Py_FrozenFlag
* Fix _PyCoreConfig_AsDict(): export also xoptions
* Add _Py_GetGlobalVariablesAsDict() and _testcapi.get_global_config()
* test.pythoninfo: dump also global configuration variables
* _testembed now serializes global, core and main configurations
using JSON to reuse _Py_GetGlobalVariablesAsDict(),
_PyCoreConfig_AsDict() and _PyMainInterpreterConfig_AsDict(),
rather than duplicating code.
* test_embed.InitConfigTests now test much more configuration
variables
Adds configure flags for msan and ubsan builds to make it easier to enable.
These also encode the detail that address sanitizer and memory sanitizer
should disable pymalloc.
Define MEMORY_SANITIZER when appropriate at build time and adds workarounds
to existing code to mark things as initialized where the sanitizer is otherwise unable to
determine that. This lets our build succeed under the memory sanitizer. not all tests
pass without sanitizer failures yet but we're in pretty good shape after this.
* ast.h now includes Python-ast.h and node.h
* parsetok.h now includes node.h and grammar.h
* symtable.h now includes Python-ast.h
* Modify asdl_c.py to enhance Python-ast.h:
* Add #ifndef/#define Py_PYTHON_AST_H to be able to include the header
twice
* Add "extern { ... }" for C++
* Undefine "Yield" macro conflicting with winbase.h
* Remove "#undef Yield" from C files, it's now done in Python-ast.h
* Remove now useless includes in C files
* _PyTuple_ITEMS() gives access to the tuple->ob_item field and cast the
first argument to PyTupleObject*. This internal macro is only usable if
Py_BUILD_CORE is defined.
* Replace &PyTuple_GET_ITEM(ob, 0) with _PyTuple_ITEMS(ob).
* Replace PyTuple_GET_ITEM(op, 1) with &_PyTuple_ITEMS(ob)[1].
Fix an off by one error in the peephole optimizer when checking for unreachable code beyond a return.
Do a bounds check within find_op so it can return before going past the end as a safety measure.
7db3c48833 (diff-a33329ae6ae0bb295d742f0caf93c137)
introduced this off by one error while fixing another one nearby.
This bug was shipped in all Python 3.6 and 3.7 releases.
The included unittest won't fail unless you do a clang msan build.
Current support for hash-based bytecode files in `zipimport` is rather
sparse, which leads to test failures when the test suite is ran with
the ``SOURCE_DATE_EPOCH`` environment variable set.
This teaches zipimport to handle hash-based pycs properly.
_testcapimodule.c must not include pycore_pathconfig.h, since it's an
internal header files.
Changes:
* Add _PyCoreConfig_AsDict() function to coreconfig.c.
* Remove pycore_pathconfig.h include from _testcapimodule.h.
* pycore_pathconfig.h now requires Py_BUILD_CORE to be defined.
* _testcapimodule.c compilation now fails if it's built with
Py_BUILD_CORE defined.
Two kind of mistakes:
1. Missed space. After concatenating there is no space between words.
2. Missed comma. Causes unintentional concatenating in a list of strings.
* And pycore_lifecycle.h and pycore_pathconfig.h headers to
Include/internal/
* Move Py_BUILD_CORE specific code from coreconfig.h and
pylifecycle.h to pycore_pathconfig.h and pycore_lifecycle.h
* Move _Py_wstrlist_XXX() definitions and _PyPathConfig code
from pycore_state.h to pycore_pathconfig.h
* Move "Init" and "Fini" function definitions from pylifecycle.c to
pycore_lifecycle.h.
If Py_BUILD_CORE is defined, the PyThreadState_GET() macro access
_PyRuntime which comes from the internal pycore_state.h header.
Public headers must not require internal headers.
Move PyThreadState_GET() and _PyInterpreterState_GET_UNSAFE() from
Include/pystate.h to Include/internal/pycore_state.h, and rename
PyThreadState_GET() to _PyThreadState_GET() there.
The PyThreadState_GET() macro of pystate.h is now redefined when
pycore_state.h is included, to use the fast _PyThreadState_GET().
Changes:
* Add _PyThreadState_GET() macro
* Replace "PyThreadState_GET()->interp" with
_PyInterpreterState_GET_UNSAFE()
* Replace PyThreadState_GET() with _PyThreadState_GET() in internal C
files (compiled with Py_BUILD_CORE defined), but keep
PyThreadState_GET() in the public header files.
* _testcapimodule.c: replace PyThreadState_GET() with
PyThreadState_Get(); the module is not compiled with Py_BUILD_CORE
defined.
* pycore_state.h now requires Py_BUILD_CORE to be defined.
Don't call _Py_FatalError_PrintExc() nor flush_std_files() if the
current thread doesn't hold the GIL, or if the current thread
has no Python state thread.
* Remove _PyThreadState_Current
* Replace GET_TSTATE() with PyThreadState_GET()
* Replace GET_INTERP_STATE() with _PyInterpreterState_GET_UNSAFE()
* Replace direct access to _PyThreadState_Current with
PyThreadState_GET()
* Replace _PyThreadState_Current with
_PyRuntime.gilstate.tstate_current
* Rename SET_TSTATE() to _PyThreadState_SET(), name more
consistent with _PyThreadState_GET()
* Update outdated comments
Make _PySys_AddXOptionWithError() and _PySys_AddWarnOptionWithError()
functions private again. They are no longer needed to initialize Python:
_PySys_EndInit() is now responsible to add these options instead.
Moreover, PySys_AddWarnOptionUnicode() now clears the exception on
failure if possible.
* bpo-34523, bpo-34403: Fix config_init_fs_encoding(): it now uses
ASCII if _Py_GetForceASCII() is true.
* Fix a regression of commit b2457efc78.
* Fix also a memory leak: get_locale_encoding() already allocates
memory, no need to duplicate the string.
Modules imported last are now cleared first at interpreter shutdown.
A newly imported module is moved to the end of sys.modules, behind
modules on which it depends.
Configuring python with ./configure --with-pydebug CFLAGS="-D COUNT_ALLOCS -O0"
makes "make smelly" fail as some symbols were being exported without the "Py_" or
"_Py" prefixes.
Since `SourceFileLoader.set_data()` catches exceptions raised by `_write_atomic()` and logs an informative message consequently, always logging successful outcome in 'SourceLoader.get_code()' seems redundant.
https://bugs.python.org/issue35024
Allow annotated global names in the module namespace after the symbol is
declared as global. Previously, only symbols annotated before they are declared
as global (i.e. inside a function) were allowed. This change allows symbols to be
declared as global before the annotation happens in the global scope.
* Compiling a string annotation containing a lambda with keyword-only
argument without default value caused a crash.
* Remove the final "*" (it is incorrect syntax) in the representation of
lambda without *args and keyword-only arguments when compile from AST.
* Improve the representation of lambda without arguments.
Iterable unpacking is now allowed without parentheses in yield and return
statements, e.g. ``yield 1, 2, 3, *rest``. Thanks to David Cuthbert for the
change and jChapman for added tests.
* Revert "bpo-34589: Add -X coerce_c_locale command line option (GH-9378)"
This reverts commit dbdee0073c.
* Revert "bpo-34589: C locale coercion off by default (GH-9073)"
This reverts commit 7a0791b699.
* Revert "bpo-34589: Make _PyCoreConfig.coerce_c_locale private (GH-9371)"
This reverts commit 188ebfa475.
`list.append([], None)` was profiled but `list.append([], None, **{})` was not profiled.
Enable profiling for later case.
https://bugs.python.org/issue34125
Py_Initialize() and Py_Main() cannot enable the C locale coercion
(PEP 538) anymore: it is always disabled. It can now only be enabled
by the Python program ("python3).
test_embed: get_filesystem_encoding() doesn't have to set PYTHONUTF8
nor PYTHONCOERCECLOCALE, these variables are already set in the
parent.
_PyCoreConfig:
* Rename coerce_c_locale to _coerce_c_locale
* Rename coerce_c_locale_warn to _coerce_c_locale_warn
These fields are now private (name prefixed by "_").
When os.fork() is called (on platforms that support it) all threads but the current one are destroyed in the child process. Consequently we must ensure that all but the associated interpreter are likewise destroyed. The main interpreter is critical for runtime operation, so we must ensure that fork only happens in the main interpreter.
https://bugs.python.org/issue34651
Followup to 90fc8980bb.
<!--
Thanks for your contribution!
Please read this comment in its entirety. It's quite important.
# Pull Request title
It should be in the following format:
```
bpo-NNNN: Summary of the changes made
```
Where: bpo-NNNN refers to the issue number in the https://bugs.python.org.
Most PRs will require an issue number. Trivial changes, like fixing a typo, do not need an issue.
# Backport Pull Request title
If this is a backport PR (PR made against branches other than `master`),
please ensure that the PR title is in the following format:
```
[X.Y] <title from the original PR> (GH-NNNN)
```
Where: [X.Y] is the branch name, e.g. [3.6].
GH-NNNN refers to the PR number from `master`.
-->
GCC complains:
Python/pylifecycle.c: In function ‘_Py_InitializeFromConfig’:
Python/pylifecycle.c:900:13: warning: ‘interp’ may be used uninitialized in this function [-Wmaybe-uninitialized]
err = _Py_InitializeMainInterpreter(interp, &main_config);
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This seems spurious since &interp is passed to _Py_InitializeCore. Anyway, we
can easily initialize to quiet the warning.
The recursive frame pruning code always undercounted the number of elided frames
by one. That is, in the "[Previous line repeated N more times]" message, N would
always be one too few. Near the recursive pruning cutoff, one frame could be
silently dropped. That situation is demonstrated in the OP of the bug report.
The fix is to start the identical frame counter at 1.
* A pointer in `PyInterpreterState_New()` could have been `NULL` when being dereferenced.
* Memory was leaked in `PyInterpreterState_New()` when taking some error-handling code path.
Use the core configuration of the interpreter, rather
than using global configuration variables. For example, replace
Py_QuietFlag with core_config->quiet.
* Py_FileSystemDefaultEncoding and Py_FileSystemDefaultEncodeErrors
default value is now NULL: initfsencoding() set them
during Python initialization.
* Document how Python chooses the filesystem encoding and error
handler.
* Add an assertion to _PyCoreConfig_Read().
Add support for the "surrogatepass" error handler in
PyUnicode_DecodeFSDefault() and PyUnicode_EncodeFSDefault()
for the UTF-8 encoding.
Changes:
* _Py_DecodeUTF8Ex() and _Py_EncodeUTF8Ex() now support the
surrogatepass error handler (_Py_ERROR_SURROGATEPASS).
* _Py_DecodeLocaleEx() and _Py_EncodeLocaleEx() now use
the _Py_error_handler enum instead of "int surrogateescape" to pass
the error handler. These functions now return -3 if the error
handler is unknown.
* Add unit tests on _Py_DecodeLocaleEx() and _Py_EncodeLocaleEx()
in test_codecs.
* Rename get_error_handler() to _Py_GetErrorHandler() and expose it
as a private function.
* _freeze_importlib doesn't need config.filesystem_errors="strict"
workaround anymore.
Py_DecodeLocale() and Py_EncodeLocale() now use the UTF-8 encoding on
Windows if Py_LegacyWindowsFSEncodingFlag is zero.
pymain_read_conf() now sets Py_LegacyWindowsFSEncodingFlag in its
loop, but restore its value at exit.
_PyCoreConfig_Read() is now responsible to choose the filesystem
encoding and error handler. Using Py_Main(), the encoding is now
chosen even before calling Py_Initialize().
_PyCoreConfig.filesystem_encoding is now the reference, instead of
Py_FileSystemDefaultEncoding, for the Python filesystem encoding.
Changes:
* Add filesystem_encoding and filesystem_errors to _PyCoreConfig
* _PyCoreConfig_Read() now reads the locale encoding for the file
system encoding.
* PyUnicode_EncodeFSDefault() and PyUnicode_DecodeFSDefaultAndSize()
now use the interpreter configuration rather than
Py_FileSystemDefaultEncoding and Py_FileSystemDefaultEncodeErrors
global configuration variables.
* Add _Py_SetFileSystemEncoding() and _Py_ClearFileSystemEncoding()
private functions to only modify Py_FileSystemDefaultEncoding and
Py_FileSystemDefaultEncodeErrors in coreconfig.c.
* _Py_CoerceLegacyLocale() now takes an int rather than
_PyCoreConfig for the warning.
On Windows, the LC_CTYPE is now set to the user preferred locale at
startup: _Py_SetLocaleFromEnv(LC_CTYPE) is now called during the
Python initialization. Previously, the LC_CTYPE locale was "C" at
startup, but changed when calling setlocale(LC_CTYPE, "") or
setlocale(LC_ALL, "").
pymain_read_conf() now also calls _Py_SetLocaleFromEnv(LC_CTYPE) to
behave as _Py_InitializeCore(). Moreover, it doesn't save/restore the
LC_ALL anymore.
On Windows, standard streams like sys.stdout now always use
surrogateescape error handler by default (ignore the locale).
Standard streams like sys.stdout now use the "surrogateescape" error
handler, instead of "strict", on the POSIX locale (when the C locale is not
coerced and the UTF-8 Mode is disabled).
Add tests on sys.stdout.errors with LC_ALL=POSIX.
* _Py_InitializeCore() now sets the LC_CTYPE locale to the user
preferred locale before checking if the C locale should be coerced
or not in _PyCoreConfig_Read().
* Fix pymain_read_conf(): remember if the C locale has been coerced
when the configuration should be read again if the encoding has
changed.
Python now gets the locale encoding with C code to initialize the encoding
of standard streams like sys.stdout. Moreover, the encoding is now
initialized to the Python codec name to get a normalized encoding name and
to ensure that the codec is loaded. The change avoids importing
_bootlocale and _locale modules at startup by default.
When the PYTHONIOENCODING environment variable only contains an encoding,
the error handler is now is now set explicitly to "strict".
Rename also get_default_standard_stream_error_handler() to
get_stdio_errors().
Reduce the buffer to format the "cpXXX" string (Windows locale encoding).
On HP-UX with C or POSIX locale, sys.getfilesystemencoding() now returns
"ascii" instead of "roman8" (when the UTF-8 Mode is disabled and the C locale
is not coerced).
nl_langinfo(CODESET) announces "roman8" whereas it uses the Latin1
encoding in practice.
* The UTF-8 Mode is now also enabled by the "POSIX" locale, not only
by the "C" locale.
* On FreeBSD, Py_DecodeLocale() and Py_EncodeLocale() now also forces
the ASCII encoding if the LC_CTYPE locale is "POSIX", not only if
the LC_CTYPE locale is "C".
* test_utf8_mode.test_cmd_line() checks also that the command line
arguments are decoded from UTF-8 when the the UTF-8 Mode is enabled
with POSIX locale or C locale.
bpo-34492: Python/coreconfig.c: Add missing NULL check to _Py_wstrlist_copy().
Fix _Py_wstrlist_clear() call on a wrong list.
Reported by Svace static analyzer.
bpo-31650, bpo-34170: Replace _Py_CheckHashBasedPycsMode with
_PyCoreConfig._check_hash_pycs_mode. Modify PyInit__imp() and
zipimport to get the parameter from the current interpreter core
configuration.
Remove Include/internal/import.h file.
* Add Include/coreconfig.h
* Move config_*() and _PyCoreConfig_*() functions from Modules/main.c
to a new Python/coreconfig.c file.
* Inline _Py_ReadHashSeed() into config_init_hash_seed()
* Move global configuration variables to coreconfig.c
* If _Py_InitializeCore() is called twice, the second call now copies
and apply (partially) the new configuration.
* Rename _Py_CommandLineDetails to _PyCmdline
* Move more code into pymain_init(). The core configuration created
by Py_Main() is new destroyed before running Python to reduce the
memory footprint.
* _Py_InitializeCore() now returns the created interpreter.
_Py_InitializeMainInterpreter() now expects an interpreter.
* Remove _Py_InitializeEx_Private(): _freeze_importlib now uses
_Py_InitializeFromConfig()
* _PyCoreConfig_InitPathConfig() now only computes the path
configuration if needed.
Add more fields to _PyCoreConfig:
* _check_hash_pycs_mode
* bytes_warning
* debug
* inspect
* interactive
* legacy_windows_fs_encoding
* legacy_windows_stdio
* optimization_level
* quiet
* unbuffered_stdio
* user_site_directory
* verbose
* write_bytecode
Changes:
* Remove pymain_get_global_config() and pymain_set_global_config()
which became useless. These functions have been replaced by
_PyCoreConfig_GetGlobalConfig() and
_PyCoreConfig_SetGlobalConfig().
* sys.flags.dont_write_bytecode value is now restricted to 1 even if
-B option is specified multiple times on the command line.
* PyThreadState_Clear() now uses the config from the current
interpreter rather than using global Py_VerboseFlag
* _PyCoreConfig: add isolated and site_import attributes
* Replace Py_IgnoreEnvironment with config->ignore_environment when
reading the current configuration
* _PyCoreConfig_Read() now sets ignore_environment, utf8_mode,
isolated and site_import from Py_IgnoreEnvironment, Py_UTF8Mode,
Py_IsolatedFlag and Py_NoSiteFlag
* _Py_InitializeCore() now sets Py_xxx flags from the configuration
* pymain_read_conf() now uses _PyCoreConfig_Copy() to save/restore
the configuration.
* Rename _disable_importlib of _PyCoreConfig to _install_importlib
* _PyCoreConfig_SetGlobalConfig() now also set
Py_HashRandomizationFlag
* Replace !Py_NoSiteFlag with core_config->site_import
* _PyCoreConfig_Read() no longer directly modifies Py_IsolatedFlag
and Py_NoSiteFlag global configuration flags. The function now
requires two pointers to integer, so these flags can be set later,
to avoid side effets in _PyCoreConfig_Read().
* pathconfig_global_init() now leaves Py_IsolatedFlag and
Py_NoSiteFlag unchanged.
* Fix pathconfig_global_init(): avoid computing the path
configuration twice, use _PyCoreConfig_SetPathConfig().
Rework _PyCoreConfig_Read() function which *reads* core configuration
to not *modify* the path configuration.
A new _PyCoreConfig_SetPathConfig() function now recreates the path
configuration from the core configuration. This function is now
called very late in _Py_InitializeCore(), just before calling
initimport().
Changes:
* Add _PyCoreConfig.dll_path
* Py_SetPath() now fails with a fatal python error on memory
allocation failure.
* Rename _PyPathConfig_Calculate() to _PyPathConfig_Calculate_impl()
* Replace _PyPathConfig_Init() with _PyPathConfig_Calculate(): the
function now requires a _PyPathConfig
* Add _PyPathConfig_SetGlobal() to set the _Py_path_config global
variable.
* Add _PyCoreConfig_InitPathConfig(): compute the path configuration
* Add _PyCoreConfig_SetPathConfig(): set path configuration from core
configuration
* Rename wstrlist_append() to _Py_wstrlist_append()
* _Py_wstrlist_append() now handles integer overflow.
Py_Main() can again be called after Py_Initialize(), as in Python
3.6. The new configuration is ignored, except of
_PyMainInterpreterConfig.argv which is used to update sys.argv.
`_PyUnicode_TransformDecimalAndSpaceToASCII()` missed trailing NUL char.
It caused buffer overflow in `_Py_string_to_number_with_underscores()`.
This bug is introduced in 9b6c60cb.
Zackery Spytz
Victor Stinner
Stéphane Wirtel
btharper
Pablo Galindo
Serhiy Storchaka
Eric Snow
Guido van Rossum
tyomitch
Anthony Sottile
pxinwr
Sergey Fedoseev
animalize
Gregory P. Smith
Inada Naoki
Alexey Izbyshev
Ivan Levkivskyi
Nina Zakharenko
Minmin Gong
Tony Roberts
native-api
Xtreak
Emily Morehouse
Michael Felt
Tal Einat
Benjamin Peterson
Jakub Kulík
Xtreak
Siddhesh Poyarekar
Steve Dower
Stefano Rivera
Elvis Pranskevichus
Quentin Agren
Quan Tian
Ammar Askar
David Cuthbert
Yury Selivanov
jdemeyer
Eric V. Smith
Raymond Hettinger
guoci
costypetrisor
Peter Lamut
Alexander Marshalov