cpython/Modules/mathmodule.c

2798 lines
84 KiB
C
Raw Normal View History

1990-10-14 09:07:46 -03:00
/* Math module -- standard C math library functions, pi and e */
/* Here are some comments from Tim Peters, extracted from the
discussion attached to http://bugs.python.org/issue1640. They
describe the general aims of the math module with respect to
special values, IEEE-754 floating-point exceptions, and Python
exceptions.
These are the "spirit of 754" rules:
1. If the mathematical result is a real number, but of magnitude too
large to approximate by a machine float, overflow is signaled and the
result is an infinity (with the appropriate sign).
2. If the mathematical result is a real number, but of magnitude too
small to approximate by a machine float, underflow is signaled and the
result is a zero (with the appropriate sign).
3. At a singularity (a value x such that the limit of f(y) as y
approaches x exists and is an infinity), "divide by zero" is signaled
and the result is an infinity (with the appropriate sign). This is
complicated a little by that the left-side and right-side limits may
not be the same; e.g., 1/x approaches +inf or -inf as x approaches 0
from the positive or negative directions. In that specific case, the
sign of the zero determines the result of 1/0.
4. At a point where a function has no defined result in the extended
reals (i.e., the reals plus an infinity or two), invalid operation is
signaled and a NaN is returned.
And these are what Python has historically /tried/ to do (but not
always successfully, as platform libm behavior varies a lot):
For #1, raise OverflowError.
For #2, return a zero (with the appropriate sign if that happens by
accident ;-)).
For #3 and #4, raise ValueError. It may have made sense to raise
Python's ZeroDivisionError in #3, but historically that's only been
raised for division by zero and mod by zero.
*/
/*
In general, on an IEEE-754 platform the aim is to follow the C99
standard, including Annex 'F', whenever possible. Where the
standard recommends raising the 'divide-by-zero' or 'invalid'
floating-point exceptions, Python should raise a ValueError. Where
the standard recommends raising 'overflow', Python should raise an
OverflowError. In all other circumstances a value should be
returned.
*/
1996-12-09 18:32:36 -04:00
#include "Python.h"
#include "_math.h"
1990-10-14 09:07:46 -03:00
#include "clinic/mathmodule.c.h"
/*[clinic input]
module math
[clinic start generated code]*/
/*[clinic end generated code: output=da39a3ee5e6b4b0d input=76bc7002685dd942]*/
/*
sin(pi*x), giving accurate results for all finite x (especially x
integral or close to an integer). This is here for use in the
reflection formula for the gamma function. It conforms to IEEE
754-2008 for finite arguments, but not for infinities or nans.
*/
static const double pi = 3.141592653589793238462643383279502884197;
static const double logpi = 1.144729885849400174143427351353058711647;
#if !defined(HAVE_ERF) || !defined(HAVE_ERFC)
static const double sqrtpi = 1.772453850905516027298167483341145182798;
#endif /* !defined(HAVE_ERF) || !defined(HAVE_ERFC) */
/* Version of PyFloat_AsDouble() with in-line fast paths
for exact floats and integers. Gives a substantial
speed improvement for extracting float arguments.
*/
#define ASSIGN_DOUBLE(target_var, obj, error_label) \
if (PyFloat_CheckExact(obj)) { \
target_var = PyFloat_AS_DOUBLE(obj); \
} \
else if (PyLong_CheckExact(obj)) { \
target_var = PyLong_AsDouble(obj); \
if (target_var == -1.0 && PyErr_Occurred()) { \
goto error_label; \
} \
} \
else { \
target_var = PyFloat_AsDouble(obj); \
if (target_var == -1.0 && PyErr_Occurred()) { \
goto error_label; \
} \
}
static double
m_sinpi(double x)
1991-12-16 11:44:24 -04:00
{
double y, r;
int n;
/* this function should only ever be called for finite arguments */
assert(Py_IS_FINITE(x));
y = fmod(fabs(x), 2.0);
n = (int)round(2.0*y);
assert(0 <= n && n <= 4);
switch (n) {
case 0:
r = sin(pi*y);
break;
case 1:
r = cos(pi*(y-0.5));
break;
case 2:
/* N.B. -sin(pi*(y-1.0)) is *not* equivalent: it would give
-0.0 instead of 0.0 when y == 1.0. */
r = sin(pi*(1.0-y));
break;
case 3:
r = -cos(pi*(y-1.5));
break;
case 4:
r = sin(pi*(y-2.0));
break;
default:
Py_UNREACHABLE();
}
return copysign(1.0, x)*r;
}
/* Implementation of the real gamma function. In extensive but non-exhaustive
random tests, this function proved accurate to within <= 10 ulps across the
entire float domain. Note that accuracy may depend on the quality of the
system math functions, the pow function in particular. Special cases
follow C99 annex F. The parameters and method are tailored to platforms
whose double format is the IEEE 754 binary64 format.
Method: for x > 0.0 we use the Lanczos approximation with parameters N=13
and g=6.024680040776729583740234375; these parameters are amongst those
used by the Boost library. Following Boost (again), we re-express the
Lanczos sum as a rational function, and compute it that way. The
coefficients below were computed independently using MPFR, and have been
double-checked against the coefficients in the Boost source code.
For x < 0.0 we use the reflection formula.
There's one minor tweak that deserves explanation: Lanczos' formula for
Gamma(x) involves computing pow(x+g-0.5, x-0.5) / exp(x+g-0.5). For many x
values, x+g-0.5 can be represented exactly. However, in cases where it
can't be represented exactly the small error in x+g-0.5 can be magnified
significantly by the pow and exp calls, especially for large x. A cheap
correction is to multiply by (1 + e*g/(x+g-0.5)), where e is the error
involved in the computation of x+g-0.5 (that is, e = computed value of
x+g-0.5 - exact value of x+g-0.5). Here's the proof:
Correction factor
-----------------
Write x+g-0.5 = y-e, where y is exactly representable as an IEEE 754
double, and e is tiny. Then:
pow(x+g-0.5,x-0.5)/exp(x+g-0.5) = pow(y-e, x-0.5)/exp(y-e)
= pow(y, x-0.5)/exp(y) * C,
where the correction_factor C is given by
C = pow(1-e/y, x-0.5) * exp(e)
Since e is tiny, pow(1-e/y, x-0.5) ~ 1-(x-0.5)*e/y, and exp(x) ~ 1+e, so:
C ~ (1-(x-0.5)*e/y) * (1+e) ~ 1 + e*(y-(x-0.5))/y
But y-(x-0.5) = g+e, and g+e ~ g. So we get C ~ 1 + e*g/y, and
pow(x+g-0.5,x-0.5)/exp(x+g-0.5) ~ pow(y, x-0.5)/exp(y) * (1 + e*g/y),
Note that for accuracy, when computing r*C it's better to do
r + e*g/y*r;
than
r * (1 + e*g/y);
since the addition in the latter throws away most of the bits of
information in e*g/y.
*/
#define LANCZOS_N 13
static const double lanczos_g = 6.024680040776729583740234375;
static const double lanczos_g_minus_half = 5.524680040776729583740234375;
static const double lanczos_num_coeffs[LANCZOS_N] = {
23531376880.410759688572007674451636754734846804940,
42919803642.649098768957899047001988850926355848959,
35711959237.355668049440185451547166705960488635843,
17921034426.037209699919755754458931112671403265390,
6039542586.3520280050642916443072979210699388420708,
1439720407.3117216736632230727949123939715485786772,
248874557.86205415651146038641322942321632125127801,
31426415.585400194380614231628318205362874684987640,
2876370.6289353724412254090516208496135991145378768,
186056.26539522349504029498971604569928220784236328,
8071.6720023658162106380029022722506138218516325024,
210.82427775157934587250973392071336271166969580291,
2.5066282746310002701649081771338373386264310793408
};
/* denominator is x*(x+1)*...*(x+LANCZOS_N-2) */
static const double lanczos_den_coeffs[LANCZOS_N] = {
0.0, 39916800.0, 120543840.0, 150917976.0, 105258076.0, 45995730.0,
13339535.0, 2637558.0, 357423.0, 32670.0, 1925.0, 66.0, 1.0};
/* gamma values for small positive integers, 1 though NGAMMA_INTEGRAL */
#define NGAMMA_INTEGRAL 23
static const double gamma_integral[NGAMMA_INTEGRAL] = {
1.0, 1.0, 2.0, 6.0, 24.0, 120.0, 720.0, 5040.0, 40320.0, 362880.0,
3628800.0, 39916800.0, 479001600.0, 6227020800.0, 87178291200.0,
1307674368000.0, 20922789888000.0, 355687428096000.0,
6402373705728000.0, 121645100408832000.0, 2432902008176640000.0,
51090942171709440000.0, 1124000727777607680000.0,
};
/* Lanczos' sum L_g(x), for positive x */
static double
lanczos_sum(double x)
{
double num = 0.0, den = 0.0;
int i;
assert(x > 0.0);
/* evaluate the rational function lanczos_sum(x). For large
x, the obvious algorithm risks overflow, so we instead
rescale the denominator and numerator of the rational
function by x**(1-LANCZOS_N) and treat this as a
rational function in 1/x. This also reduces the error for
larger x values. The choice of cutoff point (5.0 below) is
somewhat arbitrary; in tests, smaller cutoff values than
this resulted in lower accuracy. */
if (x < 5.0) {
for (i = LANCZOS_N; --i >= 0; ) {
num = num * x + lanczos_num_coeffs[i];
den = den * x + lanczos_den_coeffs[i];
}
}
else {
for (i = 0; i < LANCZOS_N; i++) {
num = num / x + lanczos_num_coeffs[i];
den = den / x + lanczos_den_coeffs[i];
}
}
return num/den;
}
/* Constant for +infinity, generated in the same way as float('inf'). */
static double
m_inf(void)
{
#ifndef PY_NO_SHORT_FLOAT_REPR
return _Py_dg_infinity(0);
#else
return Py_HUGE_VAL;
#endif
}
/* Constant nan value, generated in the same way as float('nan'). */
/* We don't currently assume that Py_NAN is defined everywhere. */
#if !defined(PY_NO_SHORT_FLOAT_REPR) || defined(Py_NAN)
static double
m_nan(void)
{
#ifndef PY_NO_SHORT_FLOAT_REPR
return _Py_dg_stdnan(0);
#else
return Py_NAN;
#endif
}
#endif
static double
m_tgamma(double x)
{
double absx, r, y, z, sqrtpow;
/* special cases */
if (!Py_IS_FINITE(x)) {
if (Py_IS_NAN(x) || x > 0.0)
return x; /* tgamma(nan) = nan, tgamma(inf) = inf */
else {
errno = EDOM;
return Py_NAN; /* tgamma(-inf) = nan, invalid */
}
}
if (x == 0.0) {
errno = EDOM;
/* tgamma(+-0.0) = +-inf, divide-by-zero */
return copysign(Py_HUGE_VAL, x);
}
/* integer arguments */
if (x == floor(x)) {
if (x < 0.0) {
errno = EDOM; /* tgamma(n) = nan, invalid for */
return Py_NAN; /* negative integers n */
}
if (x <= NGAMMA_INTEGRAL)
return gamma_integral[(int)x - 1];
}
absx = fabs(x);
/* tiny arguments: tgamma(x) ~ 1/x for x near 0 */
if (absx < 1e-20) {
r = 1.0/x;
if (Py_IS_INFINITY(r))
errno = ERANGE;
return r;
}
/* large arguments: assuming IEEE 754 doubles, tgamma(x) overflows for
x > 200, and underflows to +-0.0 for x < -200, not a negative
integer. */
if (absx > 200.0) {
if (x < 0.0) {
return 0.0/m_sinpi(x);
}
else {
errno = ERANGE;
return Py_HUGE_VAL;
}
}
y = absx + lanczos_g_minus_half;
/* compute error in sum */
if (absx > lanczos_g_minus_half) {
/* note: the correction can be foiled by an optimizing
compiler that (incorrectly) thinks that an expression like
a + b - a - b can be optimized to 0.0. This shouldn't
happen in a standards-conforming compiler. */
double q = y - absx;
z = q - lanczos_g_minus_half;
}
else {
double q = y - lanczos_g_minus_half;
z = q - absx;
}
z = z * lanczos_g / y;
if (x < 0.0) {
r = -pi / m_sinpi(absx) / absx * exp(y) / lanczos_sum(absx);
r -= z * r;
if (absx < 140.0) {
r /= pow(y, absx - 0.5);
}
else {
sqrtpow = pow(y, absx / 2.0 - 0.25);
r /= sqrtpow;
r /= sqrtpow;
}
}
else {
r = lanczos_sum(absx) / exp(y);
r += z * r;
if (absx < 140.0) {
r *= pow(y, absx - 0.5);
}
else {
sqrtpow = pow(y, absx / 2.0 - 0.25);
r *= sqrtpow;
r *= sqrtpow;
}
}
if (Py_IS_INFINITY(r))
errno = ERANGE;
return r;
1991-12-16 11:44:24 -04:00
}
/*
lgamma: natural log of the absolute value of the Gamma function.
For large arguments, Lanczos' formula works extremely well here.
*/
static double
m_lgamma(double x)
{
double r;
double absx;
/* special cases */
if (!Py_IS_FINITE(x)) {
if (Py_IS_NAN(x))
return x; /* lgamma(nan) = nan */
else
return Py_HUGE_VAL; /* lgamma(+-inf) = +inf */
}
/* integer arguments */
if (x == floor(x) && x <= 2.0) {
if (x <= 0.0) {
errno = EDOM; /* lgamma(n) = inf, divide-by-zero for */
return Py_HUGE_VAL; /* integers n <= 0 */
}
else {
return 0.0; /* lgamma(1) = lgamma(2) = 0.0 */
}
}
absx = fabs(x);
/* tiny arguments: lgamma(x) ~ -log(fabs(x)) for small x */
if (absx < 1e-20)
return -log(absx);
/* Lanczos' formula. We could save a fraction of a ulp in accuracy by
having a second set of numerator coefficients for lanczos_sum that
absorbed the exp(-lanczos_g) term, and throwing out the lanczos_g
subtraction below; it's probably not worth it. */
r = log(lanczos_sum(absx)) - lanczos_g;
r += (absx - 0.5) * (log(absx + lanczos_g - 0.5) - 1);
if (x < 0.0)
/* Use reflection formula to get value for negative x. */
r = logpi - log(fabs(m_sinpi(absx))) - log(absx) - r;
if (Py_IS_INFINITY(r))
errno = ERANGE;
return r;
}
#if !defined(HAVE_ERF) || !defined(HAVE_ERFC)
/*
Implementations of the error function erf(x) and the complementary error
function erfc(x).
Method: we use a series approximation for erf for small x, and a continued
fraction approximation for erfc(x) for larger x;
combined with the relations erf(-x) = -erf(x) and erfc(x) = 1.0 - erf(x),
this gives us erf(x) and erfc(x) for all x.
The series expansion used is:
erf(x) = x*exp(-x*x)/sqrt(pi) * [
2/1 + 4/3 x**2 + 8/15 x**4 + 16/105 x**6 + ...]
The coefficient of x**(2k-2) here is 4**k*factorial(k)/factorial(2*k).
This series converges well for smallish x, but slowly for larger x.
The continued fraction expansion used is:
erfc(x) = x*exp(-x*x)/sqrt(pi) * [1/(0.5 + x**2 -) 0.5/(2.5 + x**2 - )
3.0/(4.5 + x**2 - ) 7.5/(6.5 + x**2 - ) ...]
after the first term, the general term has the form:
k*(k-0.5)/(2*k+0.5 + x**2 - ...).
This expansion converges fast for larger x, but convergence becomes
infinitely slow as x approaches 0.0. The (somewhat naive) continued
fraction evaluation algorithm used below also risks overflow for large x;
but for large x, erfc(x) == 0.0 to within machine precision. (For
example, erfc(30.0) is approximately 2.56e-393).
Parameters: use series expansion for abs(x) < ERF_SERIES_CUTOFF and
continued fraction expansion for ERF_SERIES_CUTOFF <= abs(x) <
ERFC_CONTFRAC_CUTOFF. ERFC_SERIES_TERMS and ERFC_CONTFRAC_TERMS are the
numbers of terms to use for the relevant expansions. */
#define ERF_SERIES_CUTOFF 1.5
#define ERF_SERIES_TERMS 25
#define ERFC_CONTFRAC_CUTOFF 30.0
#define ERFC_CONTFRAC_TERMS 50
/*
Error function, via power series.
Given a finite float x, return an approximation to erf(x).
Converges reasonably fast for small x.
*/
static double
m_erf_series(double x)
{
double x2, acc, fk, result;
int i, saved_errno;
x2 = x * x;
acc = 0.0;
fk = (double)ERF_SERIES_TERMS + 0.5;
for (i = 0; i < ERF_SERIES_TERMS; i++) {
acc = 2.0 + x2 * acc / fk;
fk -= 1.0;
}
/* Make sure the exp call doesn't affect errno;
see m_erfc_contfrac for more. */
saved_errno = errno;
result = acc * x * exp(-x2) / sqrtpi;
errno = saved_errno;
return result;
}
/*
Complementary error function, via continued fraction expansion.
Given a positive float x, return an approximation to erfc(x). Converges
reasonably fast for x large (say, x > 2.0), and should be safe from
overflow if x and nterms are not too large. On an IEEE 754 machine, with x
<= 30.0, we're safe up to nterms = 100. For x >= 30.0, erfc(x) is smaller
than the smallest representable nonzero float. */
static double
m_erfc_contfrac(double x)
{
double x2, a, da, p, p_last, q, q_last, b, result;
int i, saved_errno;
if (x >= ERFC_CONTFRAC_CUTOFF)
return 0.0;
x2 = x*x;
a = 0.0;
da = 0.5;
p = 1.0; p_last = 0.0;
q = da + x2; q_last = 1.0;
for (i = 0; i < ERFC_CONTFRAC_TERMS; i++) {
double temp;
a += da;
da += 2.0;
b = da + x2;
temp = p; p = b*p - a*p_last; p_last = temp;
temp = q; q = b*q - a*q_last; q_last = temp;
}
/* Issue #8986: On some platforms, exp sets errno on underflow to zero;
save the current errno value so that we can restore it later. */
saved_errno = errno;
result = p / q * x * exp(-x2) / sqrtpi;
errno = saved_errno;
return result;
}
#endif /* !defined(HAVE_ERF) || !defined(HAVE_ERFC) */
/* Error function erf(x), for general x */
static double
m_erf(double x)
{
#ifdef HAVE_ERF
return erf(x);
#else
double absx, cf;
if (Py_IS_NAN(x))
return x;
absx = fabs(x);
if (absx < ERF_SERIES_CUTOFF)
return m_erf_series(x);
else {
cf = m_erfc_contfrac(absx);
return x > 0.0 ? 1.0 - cf : cf - 1.0;
}
#endif
}
/* Complementary error function erfc(x), for general x. */
static double
m_erfc(double x)
{
#ifdef HAVE_ERFC
return erfc(x);
#else
double absx, cf;
if (Py_IS_NAN(x))
return x;
absx = fabs(x);
if (absx < ERF_SERIES_CUTOFF)
return 1.0 - m_erf_series(x);
else {
cf = m_erfc_contfrac(absx);
return x > 0.0 ? cf : 2.0 - cf;
}
#endif
}
/*
wrapper for atan2 that deals directly with special cases before
delegating to the platform libm for the remaining cases. This
is necessary to get consistent behaviour across platforms.
Windows, FreeBSD and alpha Tru64 are amongst platforms that don't
always follow C99.
*/
static double
m_atan2(double y, double x)
{
if (Py_IS_NAN(x) || Py_IS_NAN(y))
return Py_NAN;
if (Py_IS_INFINITY(y)) {
if (Py_IS_INFINITY(x)) {
if (copysign(1., x) == 1.)
/* atan2(+-inf, +inf) == +-pi/4 */
return copysign(0.25*Py_MATH_PI, y);
else
/* atan2(+-inf, -inf) == +-pi*3/4 */
return copysign(0.75*Py_MATH_PI, y);
}
/* atan2(+-inf, x) == +-pi/2 for finite x */
return copysign(0.5*Py_MATH_PI, y);
}
if (Py_IS_INFINITY(x) || y == 0.) {
if (copysign(1., x) == 1.)
/* atan2(+-y, +inf) = atan2(+-0, +x) = +-0. */
return copysign(0., y);
else
/* atan2(+-y, -inf) = atan2(+-0., -x) = +-pi. */
return copysign(Py_MATH_PI, y);
}
return atan2(y, x);
}
/* IEEE 754-style remainder operation: x - n*y where n*y is the nearest
multiple of y to x, taking n even in the case of a tie. Assuming an IEEE 754
binary floating-point format, the result is always exact. */
static double
m_remainder(double x, double y)
{
/* Deal with most common case first. */
if (Py_IS_FINITE(x) && Py_IS_FINITE(y)) {
double absx, absy, c, m, r;
if (y == 0.0) {
return Py_NAN;
}
absx = fabs(x);
absy = fabs(y);
m = fmod(absx, absy);
/*
Warning: some subtlety here. What we *want* to know at this point is
whether the remainder m is less than, equal to, or greater than half
of absy. However, we can't do that comparison directly because we
can't be sure that 0.5*absy is representable (the mutiplication
might incur precision loss due to underflow). So instead we compare
m with the complement c = absy - m: m < 0.5*absy if and only if m <
c, and so on. The catch is that absy - m might also not be
representable, but it turns out that it doesn't matter:
- if m > 0.5*absy then absy - m is exactly representable, by
Sterbenz's lemma, so m > c
- if m == 0.5*absy then again absy - m is exactly representable
and m == c
- if m < 0.5*absy then either (i) 0.5*absy is exactly representable,
in which case 0.5*absy < absy - m, so 0.5*absy <= c and hence m <
c, or (ii) absy is tiny, either subnormal or in the lowest normal
binade. Then absy - m is exactly representable and again m < c.
*/
c = absy - m;
if (m < c) {
r = m;
}
else if (m > c) {
r = -c;
}
else {
/*
Here absx is exactly halfway between two multiples of absy,
and we need to choose the even multiple. x now has the form
absx = n * absy + m
for some integer n (recalling that m = 0.5*absy at this point).
If n is even we want to return m; if n is odd, we need to
return -m.
So
0.5 * (absx - m) = (n/2) * absy
and now reducing modulo absy gives us:
| m, if n is odd
fmod(0.5 * (absx - m), absy) = |
| 0, if n is even
Now m - 2.0 * fmod(...) gives the desired result: m
if n is even, -m if m is odd.
Note that all steps in fmod(0.5 * (absx - m), absy)
will be computed exactly, with no rounding error
introduced.
*/
assert(m == c);
r = m - 2.0 * fmod(0.5 * (absx - m), absy);
}
return copysign(1.0, x) * r;
}
/* Special values. */
if (Py_IS_NAN(x)) {
return x;
}
if (Py_IS_NAN(y)) {
return y;
}
if (Py_IS_INFINITY(x)) {
return Py_NAN;
}
assert(Py_IS_INFINITY(y));
return x;
}
/*
Various platforms (Solaris, OpenBSD) do nonstandard things for log(0),
log(-ve), log(NaN). Here are wrappers for log and log10 that deal with
special values directly, passing positive non-special values through to
the system log/log10.
*/
static double
m_log(double x)
{
if (Py_IS_FINITE(x)) {
if (x > 0.0)
return log(x);
errno = EDOM;
if (x == 0.0)
return -Py_HUGE_VAL; /* log(0) = -inf */
else
return Py_NAN; /* log(-ve) = nan */
}
else if (Py_IS_NAN(x))
return x; /* log(nan) = nan */
else if (x > 0.0)
return x; /* log(inf) = inf */
else {
errno = EDOM;
return Py_NAN; /* log(-inf) = nan */
}
}
/*
log2: log to base 2.
Uses an algorithm that should:
(a) produce exact results for powers of 2, and
(b) give a monotonic log2 (for positive finite floats),
assuming that the system log is monotonic.
*/
static double
m_log2(double x)
{
if (!Py_IS_FINITE(x)) {
if (Py_IS_NAN(x))
return x; /* log2(nan) = nan */
else if (x > 0.0)
return x; /* log2(+inf) = +inf */
else {
errno = EDOM;
return Py_NAN; /* log2(-inf) = nan, invalid-operation */
}
}
if (x > 0.0) {
#ifdef HAVE_LOG2
return log2(x);
#else
double m;
int e;
m = frexp(x, &e);
/* We want log2(m * 2**e) == log(m) / log(2) + e. Care is needed when
* x is just greater than 1.0: in that case e is 1, log(m) is negative,
* and we get significant cancellation error from the addition of
* log(m) / log(2) to e. The slight rewrite of the expression below
* avoids this problem.
*/
if (x >= 1.0) {
return log(2.0 * m) / log(2.0) + (e - 1);
}
else {
return log(m) / log(2.0) + e;
}
#endif
}
else if (x == 0.0) {
errno = EDOM;
return -Py_HUGE_VAL; /* log2(0) = -inf, divide-by-zero */
}
else {
errno = EDOM;
return Py_NAN; /* log2(-inf) = nan, invalid-operation */
}
}
static double
m_log10(double x)
{
if (Py_IS_FINITE(x)) {
if (x > 0.0)
return log10(x);
errno = EDOM;
if (x == 0.0)
return -Py_HUGE_VAL; /* log10(0) = -inf */
else
return Py_NAN; /* log10(-ve) = nan */
}
else if (Py_IS_NAN(x))
return x; /* log10(nan) = nan */
else if (x > 0.0)
return x; /* log10(inf) = inf */
else {
errno = EDOM;
return Py_NAN; /* log10(-inf) = nan */
}
}
/*[clinic input]
math.gcd
x as a: object
y as b: object
/
greatest common divisor of x and y
[clinic start generated code]*/
static PyObject *
math_gcd_impl(PyObject *module, PyObject *a, PyObject *b)
/*[clinic end generated code: output=7b2e0c151bd7a5d8 input=c2691e57fb2a98fa]*/
{
PyObject *g;
a = PyNumber_Index(a);
if (a == NULL)
return NULL;
b = PyNumber_Index(b);
if (b == NULL) {
Py_DECREF(a);
return NULL;
}
g = _PyLong_GCD(a, b);
Py_DECREF(a);
Py_DECREF(b);
return g;
}
/* Call is_error when errno != 0, and where x is the result libm
* returned. is_error will usually set up an exception and return
* true (1), but may return false (0) without setting up an exception.
*/
static int
is_error(double x)
{
int result = 1; /* presumption of guilt */
assert(errno); /* non-zero errno is a precondition for calling */
if (errno == EDOM)
PyErr_SetString(PyExc_ValueError, "math domain error");
else if (errno == ERANGE) {
/* ANSI C generally requires libm functions to set ERANGE
* on overflow, but also generally *allows* them to set
* ERANGE on underflow too. There's no consistency about
* the latter across platforms.
* Alas, C99 never requires that errno be set.
* Here we suppress the underflow errors (libm functions
* should return a zero on underflow, and +- HUGE_VAL on
* overflow, so testing the result for zero suffices to
* distinguish the cases).
*
* On some platforms (Ubuntu/ia64) it seems that errno can be
* set to ERANGE for subnormal results that do *not* underflow
* to zero. So to be safe, we'll ignore ERANGE whenever the
* function result is less than one in absolute value.
*/
if (fabs(x) < 1.0)
result = 0;
else
PyErr_SetString(PyExc_OverflowError,
"math range error");
}
else
/* Unexpected math error */
PyErr_SetFromErrno(PyExc_ValueError);
return result;
}
/*
math_1 is used to wrap a libm function f that takes a double
argument and returns a double.
The error reporting follows these rules, which are designed to do
the right thing on C89/C99 platforms and IEEE 754/non IEEE 754
platforms.
- a NaN result from non-NaN inputs causes ValueError to be raised
- an infinite result from finite inputs causes OverflowError to be
raised if can_overflow is 1, or raises ValueError if can_overflow
is 0.
- if the result is finite and errno == EDOM then ValueError is
raised
- if the result is finite and nonzero and errno == ERANGE then
OverflowError is raised
The last rule is used to catch overflow on platforms which follow
C89 but for which HUGE_VAL is not an infinity.
For the majority of one-argument functions these rules are enough
to ensure that Python's functions behave as specified in 'Annex F'
of the C99 standard, with the 'invalid' and 'divide-by-zero'
floating-point exceptions mapping to Python's ValueError and the
'overflow' floating-point exception mapping to OverflowError.
math_1 only works for functions that don't have singularities *and*
the possibility of overflow; fortunately, that covers everything we
care about right now.
*/
1996-12-09 18:32:36 -04:00
static PyObject *
math_1_to_whatever(PyObject *arg, double (*func) (double),
PyObject *(*from_double_func) (double),
int can_overflow)
1990-10-14 09:07:46 -03:00
{
double x, r;
x = PyFloat_AsDouble(arg);
if (x == -1.0 && PyErr_Occurred())
return NULL;
errno = 0;
PyFPE_START_PROTECT("in math_1", return 0);
r = (*func)(x);
PyFPE_END_PROTECT(r);
if (Py_IS_NAN(r) && !Py_IS_NAN(x)) {
PyErr_SetString(PyExc_ValueError,
"math domain error"); /* invalid arg */
return NULL;
}
if (Py_IS_INFINITY(r) && Py_IS_FINITE(x)) {
2012-03-13 18:13:09 -03:00
if (can_overflow)
PyErr_SetString(PyExc_OverflowError,
"math range error"); /* overflow */
else
PyErr_SetString(PyExc_ValueError,
"math domain error"); /* singularity */
return NULL;
}
if (Py_IS_FINITE(r) && errno && is_error(r))
/* this branch unnecessary on most platforms */
return NULL;
return (*from_double_func)(r);
}
/* variant of math_1, to be used when the function being wrapped is known to
set errno properly (that is, errno = EDOM for invalid or divide-by-zero,
errno = ERANGE for overflow). */
static PyObject *
math_1a(PyObject *arg, double (*func) (double))
{
double x, r;
x = PyFloat_AsDouble(arg);
if (x == -1.0 && PyErr_Occurred())
return NULL;
errno = 0;
PyFPE_START_PROTECT("in math_1a", return 0);
r = (*func)(x);
PyFPE_END_PROTECT(r);
if (errno && is_error(r))
return NULL;
return PyFloat_FromDouble(r);
}
/*
math_2 is used to wrap a libm function f that takes two double
arguments and returns a double.
The error reporting follows these rules, which are designed to do
the right thing on C89/C99 platforms and IEEE 754/non IEEE 754
platforms.
- a NaN result from non-NaN inputs causes ValueError to be raised
- an infinite result from finite inputs causes OverflowError to be
raised.
- if the result is finite and errno == EDOM then ValueError is
raised
- if the result is finite and nonzero and errno == ERANGE then
OverflowError is raised
The last rule is used to catch overflow on platforms which follow
C89 but for which HUGE_VAL is not an infinity.
For most two-argument functions (copysign, fmod, hypot, atan2)
these rules are enough to ensure that Python's functions behave as
specified in 'Annex F' of the C99 standard, with the 'invalid' and
'divide-by-zero' floating-point exceptions mapping to Python's
ValueError and the 'overflow' floating-point exception mapping to
OverflowError.
*/
static PyObject *
math_1(PyObject *arg, double (*func) (double), int can_overflow)
{
return math_1_to_whatever(arg, func, PyFloat_FromDouble, can_overflow);
}
static PyObject *
math_1_to_int(PyObject *arg, double (*func) (double), int can_overflow)
{
return math_1_to_whatever(arg, func, PyLong_FromDouble, can_overflow);
1990-10-14 09:07:46 -03:00
}
1996-12-09 18:32:36 -04:00
static PyObject *
math_2(PyObject *const *args, Py_ssize_t nargs,
double (*func) (double, double), const char *funcname)
1990-10-14 09:07:46 -03:00
{
double x, y, r;
if (!_PyArg_CheckPositional(funcname, nargs, 2, 2))
return NULL;
x = PyFloat_AsDouble(args[0]);
y = PyFloat_AsDouble(args[1]);
if ((x == -1.0 || y == -1.0) && PyErr_Occurred())
return NULL;
errno = 0;
PyFPE_START_PROTECT("in math_2", return 0);
r = (*func)(x, y);
PyFPE_END_PROTECT(r);
if (Py_IS_NAN(r)) {
if (!Py_IS_NAN(x) && !Py_IS_NAN(y))
errno = EDOM;
else
errno = 0;
}
else if (Py_IS_INFINITY(r)) {
if (Py_IS_FINITE(x) && Py_IS_FINITE(y))
errno = ERANGE;
else
errno = 0;
}
if (errno && is_error(r))
return NULL;
else
return PyFloat_FromDouble(r);
1990-10-14 09:07:46 -03:00
}
#define FUNC1(funcname, func, can_overflow, docstring) \
static PyObject * math_##funcname(PyObject *self, PyObject *args) { \
return math_1(args, func, can_overflow); \
}\
PyDoc_STRVAR(math_##funcname##_doc, docstring);
1990-10-14 09:07:46 -03:00
#define FUNC1A(funcname, func, docstring) \
static PyObject * math_##funcname(PyObject *self, PyObject *args) { \
return math_1a(args, func); \
}\
PyDoc_STRVAR(math_##funcname##_doc, docstring);
#define FUNC2(funcname, func, docstring) \
static PyObject * math_##funcname(PyObject *self, PyObject *const *args, Py_ssize_t nargs) { \
return math_2(args, nargs, func, #funcname); \
}\
PyDoc_STRVAR(math_##funcname##_doc, docstring);
FUNC1(acos, acos, 0,
"acos($module, x, /)\n--\n\n"
"Return the arc cosine (measured in radians) of x.")
FUNC1(acosh, m_acosh, 0,
"acosh($module, x, /)\n--\n\n"
"Return the inverse hyperbolic cosine of x.")
FUNC1(asin, asin, 0,
"asin($module, x, /)\n--\n\n"
"Return the arc sine (measured in radians) of x.")
FUNC1(asinh, m_asinh, 0,
"asinh($module, x, /)\n--\n\n"
"Return the inverse hyperbolic sine of x.")
FUNC1(atan, atan, 0,
"atan($module, x, /)\n--\n\n"
"Return the arc tangent (measured in radians) of x.")
FUNC2(atan2, m_atan2,
"atan2($module, y, x, /)\n--\n\n"
"Return the arc tangent (measured in radians) of y/x.\n\n"
"Unlike atan(y/x), the signs of both x and y are considered.")
FUNC1(atanh, m_atanh, 0,
"atanh($module, x, /)\n--\n\n"
"Return the inverse hyperbolic tangent of x.")
/*[clinic input]
math.ceil
x as number: object
/
Return the ceiling of x as an Integral.
This is the smallest integer >= x.
[clinic start generated code]*/
static PyObject *
math_ceil(PyObject *module, PyObject *number)
/*[clinic end generated code: output=6c3b8a78bc201c67 input=2725352806399cab]*/
{
_Py_IDENTIFIER(__ceil__);
PyObject *method, *result;
method = _PyObject_LookupSpecial(number, &PyId___ceil__);
2010-07-02 10:46:42 -03:00
if (method == NULL) {
if (PyErr_Occurred())
return NULL;
return math_1_to_int(number, ceil, 0);
2010-07-02 10:46:42 -03:00
}
result = _PyObject_CallNoArg(method);
Py_DECREF(method);
return result;
}
FUNC2(copysign, copysign,
"copysign($module, x, y, /)\n--\n\n"
"Return a float with the magnitude (absolute value) of x but the sign of y.\n\n"
"On platforms that support signed zeros, copysign(1.0, -0.0)\n"
"returns -1.0.\n")
FUNC1(cos, cos, 0,
"cos($module, x, /)\n--\n\n"
"Return the cosine of x (measured in radians).")
FUNC1(cosh, cosh, 1,
"cosh($module, x, /)\n--\n\n"
"Return the hyperbolic cosine of x.")
FUNC1A(erf, m_erf,
"erf($module, x, /)\n--\n\n"
"Error function at x.")
FUNC1A(erfc, m_erfc,
"erfc($module, x, /)\n--\n\n"
"Complementary error function at x.")
FUNC1(exp, exp, 1,
"exp($module, x, /)\n--\n\n"
"Return e raised to the power of x.")
FUNC1(expm1, m_expm1, 1,
"expm1($module, x, /)\n--\n\n"
"Return exp(x)-1.\n\n"
"This function avoids the loss of precision involved in the direct "
"evaluation of exp(x)-1 for small x.")
FUNC1(fabs, fabs, 0,
"fabs($module, x, /)\n--\n\n"
"Return the absolute value of the float x.")
/*[clinic input]
math.floor
x as number: object
/
Return the floor of x as an Integral.
This is the largest integer <= x.
[clinic start generated code]*/
static PyObject *
math_floor(PyObject *module, PyObject *number)
/*[clinic end generated code: output=c6a65c4884884b8a input=63af6b5d7ebcc3d6]*/
{
_Py_IDENTIFIER(__floor__);
PyObject *method, *result;
method = _PyObject_LookupSpecial(number, &PyId___floor__);
if (method == NULL) {
if (PyErr_Occurred())
return NULL;
return math_1_to_int(number, floor, 0);
}
result = _PyObject_CallNoArg(method);
Py_DECREF(method);
return result;
}
FUNC1A(gamma, m_tgamma,
"gamma($module, x, /)\n--\n\n"
"Gamma function at x.")
FUNC1A(lgamma, m_lgamma,
"lgamma($module, x, /)\n--\n\n"
"Natural logarithm of absolute value of Gamma function at x.")
FUNC1(log1p, m_log1p, 0,
"log1p($module, x, /)\n--\n\n"
"Return the natural logarithm of 1+x (base e).\n\n"
Merged revisions 75149,75260-75263,75265-75267,75292,75300,75376,75405,75429-75433,75437,75445,75501,75551,75572,75589-75591,75657,75742,75868,75952-75957,76057,76105,76139,76143,76162,76223 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r75149 | gregory.p.smith | 2009-09-29 16:56:31 -0500 (Tue, 29 Sep 2009) | 3 lines Mention issue6972 in extractall docs about overwriting things outside of the supplied path. ........ r75260 | andrew.kuchling | 2009-10-05 16:24:20 -0500 (Mon, 05 Oct 2009) | 1 line Wording fix ........ r75261 | andrew.kuchling | 2009-10-05 16:24:35 -0500 (Mon, 05 Oct 2009) | 1 line Fix narkup ........ r75262 | andrew.kuchling | 2009-10-05 16:25:03 -0500 (Mon, 05 Oct 2009) | 1 line Document 'skip' parameter to constructor ........ r75263 | andrew.kuchling | 2009-10-05 16:25:35 -0500 (Mon, 05 Oct 2009) | 1 line Note side benefit of socket.create_connection() ........ r75265 | andrew.kuchling | 2009-10-05 17:31:11 -0500 (Mon, 05 Oct 2009) | 1 line Reword sentence ........ r75266 | andrew.kuchling | 2009-10-05 17:32:48 -0500 (Mon, 05 Oct 2009) | 1 line Use standard comma punctuation; reword some sentences in the docs ........ r75267 | andrew.kuchling | 2009-10-05 17:42:56 -0500 (Mon, 05 Oct 2009) | 1 line Backport r73983: Document the thousands separator. ........ r75292 | benjamin.peterson | 2009-10-08 22:11:36 -0500 (Thu, 08 Oct 2009) | 1 line death to old CVS keyword ........ r75300 | benjamin.peterson | 2009-10-09 16:48:14 -0500 (Fri, 09 Oct 2009) | 1 line fix some coding style ........ r75376 | benjamin.peterson | 2009-10-11 20:26:07 -0500 (Sun, 11 Oct 2009) | 1 line platform we don't care about ........ r75405 | neil.schemenauer | 2009-10-14 12:17:14 -0500 (Wed, 14 Oct 2009) | 4 lines Issue #1754094: Improve the stack depth calculation in the compiler. There should be no other effect than a small decrease in memory use. Patch by Christopher Tur Lesniewski-Laas. ........ r75429 | benjamin.peterson | 2009-10-14 20:47:28 -0500 (Wed, 14 Oct 2009) | 1 line pep8ify if blocks ........ r75430 | benjamin.peterson | 2009-10-14 20:49:37 -0500 (Wed, 14 Oct 2009) | 1 line use floor division and add a test that exercises the tabsize codepath ........ r75431 | benjamin.peterson | 2009-10-14 20:56:25 -0500 (Wed, 14 Oct 2009) | 1 line change test to what I intended ........ r75432 | benjamin.peterson | 2009-10-14 22:05:39 -0500 (Wed, 14 Oct 2009) | 1 line some cleanups ........ r75433 | benjamin.peterson | 2009-10-14 22:06:55 -0500 (Wed, 14 Oct 2009) | 1 line make inspect.isabstract() always return a boolean; add a test for it, too #7069 ........ r75437 | benjamin.peterson | 2009-10-15 10:44:46 -0500 (Thu, 15 Oct 2009) | 1 line only clear a module's __dict__ if the module is the only one with a reference to it #7140 ........ r75445 | vinay.sajip | 2009-10-16 09:06:44 -0500 (Fri, 16 Oct 2009) | 1 line Issue #7120: logging: Removed import of multiprocessing which is causing crash in GAE. ........ r75501 | antoine.pitrou | 2009-10-18 13:37:11 -0500 (Sun, 18 Oct 2009) | 3 lines Add a comment about unreachable code, and fix a typo ........ r75551 | benjamin.peterson | 2009-10-19 22:14:10 -0500 (Mon, 19 Oct 2009) | 1 line use property api ........ r75572 | benjamin.peterson | 2009-10-20 16:55:17 -0500 (Tue, 20 Oct 2009) | 1 line clarify buffer arg #7178 ........ r75589 | benjamin.peterson | 2009-10-21 21:26:47 -0500 (Wed, 21 Oct 2009) | 1 line whitespace ........ r75590 | benjamin.peterson | 2009-10-21 21:36:47 -0500 (Wed, 21 Oct 2009) | 1 line rewrite to be nice to other implementations ........ r75591 | benjamin.peterson | 2009-10-21 21:50:38 -0500 (Wed, 21 Oct 2009) | 4 lines rewrite for style, clarify, and comments Also, use the hasattr() like scheme of allowing BaseException exceptions through. ........ r75657 | antoine.pitrou | 2009-10-24 07:41:27 -0500 (Sat, 24 Oct 2009) | 3 lines Fix compilation error in debug mode. ........ r75742 | benjamin.peterson | 2009-10-26 17:51:16 -0500 (Mon, 26 Oct 2009) | 1 line use 'is' instead of id() ........ r75868 | benjamin.peterson | 2009-10-27 15:59:18 -0500 (Tue, 27 Oct 2009) | 1 line test expect base classes ........ r75952 | georg.brandl | 2009-10-29 15:38:32 -0500 (Thu, 29 Oct 2009) | 1 line Use the correct function name in docstring. ........ r75953 | georg.brandl | 2009-10-29 15:39:50 -0500 (Thu, 29 Oct 2009) | 1 line Remove mention of the old -X command line switch. ........ r75954 | georg.brandl | 2009-10-29 15:53:00 -0500 (Thu, 29 Oct 2009) | 1 line Use constants instead of magic integers for test result. Do not re-run with --verbose3 for environment changing tests. ........ r75955 | georg.brandl | 2009-10-29 15:54:03 -0500 (Thu, 29 Oct 2009) | 1 line Use a single style for all the docstrings in the math module. ........ r75956 | georg.brandl | 2009-10-29 16:16:34 -0500 (Thu, 29 Oct 2009) | 1 line I do not think the "railroad" program mentioned is still available. ........ r75957 | georg.brandl | 2009-10-29 16:44:56 -0500 (Thu, 29 Oct 2009) | 1 line Fix constant name. ........ r76057 | benjamin.peterson | 2009-11-02 09:06:45 -0600 (Mon, 02 Nov 2009) | 1 line prevent a rather unlikely segfault ........ r76105 | georg.brandl | 2009-11-04 01:38:12 -0600 (Wed, 04 Nov 2009) | 1 line #7259: show correct equivalent for operator.i* operations in docstring; fix minor issues in operator docs. ........ r76139 | benjamin.peterson | 2009-11-06 19:04:38 -0600 (Fri, 06 Nov 2009) | 1 line spelling ........ r76143 | georg.brandl | 2009-11-07 02:26:07 -0600 (Sat, 07 Nov 2009) | 1 line #7271: fix typo. ........ r76162 | benjamin.peterson | 2009-11-08 22:10:53 -0600 (Sun, 08 Nov 2009) | 1 line discuss how to use -p ........ r76223 | georg.brandl | 2009-11-12 02:29:46 -0600 (Thu, 12 Nov 2009) | 1 line Give the profile module a module directive. ........
2009-11-12 22:25:08 -04:00
"The result is computed in a way which is accurate for x near zero.")
FUNC2(remainder, m_remainder,
"remainder($module, x, y, /)\n--\n\n"
"Difference between x and the closest integer multiple of y.\n\n"
"Return x - n*y where n*y is the closest integer multiple of y.\n"
"In the case where x is exactly halfway between two multiples of\n"
"y, the nearest even value of n is used. The result is always exact.")
FUNC1(sin, sin, 0,
"sin($module, x, /)\n--\n\n"
"Return the sine of x (measured in radians).")
FUNC1(sinh, sinh, 1,
"sinh($module, x, /)\n--\n\n"
"Return the hyperbolic sine of x.")
FUNC1(sqrt, sqrt, 0,
"sqrt($module, x, /)\n--\n\n"
"Return the square root of x.")
FUNC1(tan, tan, 0,
"tan($module, x, /)\n--\n\n"
"Return the tangent of x (measured in radians).")
FUNC1(tanh, tanh, 0,
"tanh($module, x, /)\n--\n\n"
"Return the hyperbolic tangent of x.")
1990-10-14 09:07:46 -03:00
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
/* Precision summation function as msum() by Raymond Hettinger in
<http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/393090>,
enhanced with the exact partials sum and roundoff from Mark
Dickinson's post at <http://bugs.python.org/file10357/msum4.py>.
See those links for more details, proofs and other references.
Note 1: IEEE 754R floating point semantics are assumed,
but the current implementation does not re-establish special
value semantics across iterations (i.e. handling -Inf + Inf).
Note 2: No provision is made for intermediate overflow handling;
Merged revisions 63562,63570,63728,63734,63784,63788,63802,63817,63827,63839,63887,63975,63998 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63562 | martin.v.loewis | 2008-05-23 17:06:50 +0200 (Fri, 23 May 2008) | 2 lines Patch #1722225: Support QNX 6. ........ r63570 | trent.nelson | 2008-05-23 22:33:14 +0200 (Fri, 23 May 2008) | 1 line Introduce a user macro named $(externalsDir), which should point to the root directory of where all the external sources should live. Developers can change this value if their external sources live elsewhere. The default of '..\..' matches the current status quo. ........ r63728 | gregory.p.smith | 2008-05-26 23:16:34 +0200 (Mon, 26 May 2008) | 4 lines Fix issue2589: there was a potential integer overflow leading to memory corruption on esoteric platforms and incorrect behavior on normal platforms. ........ r63734 | gregory.p.smith | 2008-05-27 00:07:28 +0200 (Tue, 27 May 2008) | 3 lines Fix issue2588: Do not execute str[size-1] = '\0' when a 0 size is passed in. (The assert won't prevent this in non-debug builds). ........ r63784 | raymond.hettinger | 2008-05-29 10:38:23 +0200 (Thu, 29 May 2008) | 1 line Fix two typos. ........ r63788 | facundo.batista | 2008-05-29 18:39:26 +0200 (Thu, 29 May 2008) | 6 lines Fixed the semantic of timeout for socket.create_connection and all the upper level libraries that use it, including urllib2. Added and fixed some tests, and changed docs correspondingly. Thanks to John J Lee for the patch and the pusing, :) ........ r63802 | mark.dickinson | 2008-05-30 04:46:53 +0200 (Fri, 30 May 2008) | 2 lines Fix typo in testSum ........ r63817 | raymond.hettinger | 2008-05-30 20:20:50 +0200 (Fri, 30 May 2008) | 8 lines * Mark intermedidate computes values (hi, lo, yr) as volatile. * Expand comments. * Swap variable names in the sum_exact code so that x and y are consistently chosen as the larger and smaller magnitude values respectively. ........ r63827 | raymond.hettinger | 2008-05-31 05:24:31 +0200 (Sat, 31 May 2008) | 1 line Implement heapq in terms of less-than (to match list.sort()). ........ r63839 | gerhard.haering | 2008-05-31 23:33:27 +0200 (Sat, 31 May 2008) | 2 lines Fixed rowcount for SELECT statements. They're -1 now (again), for better DB-API 2.0 compliance. ........ r63887 | gregory.p.smith | 2008-06-02 06:05:52 +0200 (Mon, 02 Jun 2008) | 4 lines Fix issue 2782: be less strict about the format string type in strftime. Accept unicode and anything else ParseTuple "s#" can deal with. This matches the time.strftime behavior. ........ r63975 | neal.norwitz | 2008-06-06 06:47:01 +0200 (Fri, 06 Jun 2008) | 3 lines Aldo Cortesi confirmed this is still needed for OpenBSD 4.2 and 4.3. (I didn't regen configure, since I don't have a working autoconf.) ........ r63998 | raymond.hettinger | 2008-06-06 23:47:51 +0200 (Fri, 06 Jun 2008) | 1 line Issue 3501: Make heapq support both __le__ and __lt__. ........
2008-06-10 14:40:04 -03:00
therefore, sum([1e+308, 1e-308, 1e+308]) returns 1e+308 while
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
sum([1e+308, 1e+308, 1e-308]) raises an OverflowError due to the
overflow of the first partial sum.
Merged revisions 64365,64370,64406,64408-64409,64412,64416-64417,64420-64421,64425-64428 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r64365 | raymond.hettinger | 2008-06-17 19:56:57 -0500 (Tue, 17 Jun 2008) | 1 line Fix double decref. ........ r64370 | mark.dickinson | 2008-06-18 04:20:17 -0500 (Wed, 18 Jun 2008) | 2 lines Typo fix ........ r64406 | andrew.kuchling | 2008-06-19 09:02:30 -0500 (Thu, 19 Jun 2008) | 1 line Only include update_lines_cols() function when it's actually going to be used ........ r64408 | amaury.forgeotdarc | 2008-06-19 14:57:39 -0500 (Thu, 19 Jun 2008) | 2 lines test_macos can be skipped on non-mac platforms. ........ r64409 | andrew.kuchling | 2008-06-19 15:33:31 -0500 (Thu, 19 Jun 2008) | 1 line Put threading in front of thread ........ r64412 | amaury.forgeotdarc | 2008-06-19 16:17:12 -0500 (Thu, 19 Jun 2008) | 3 lines In test_site, correctly escape backslashes in path names. This allows the test to pass when the username begins with a lowercase 't'... ........ r64416 | vinay.sajip | 2008-06-19 17:40:17 -0500 (Thu, 19 Jun 2008) | 2 lines Bug #3136: fileConfig()'s disabling of old loggers is now conditional via an optional disable_existing_loggers parameter, but the default value is such that the old behaviour is preserved. Thanks to Leandro Lucarella for the patch. ........ r64417 | vinay.sajip | 2008-06-19 17:41:08 -0500 (Thu, 19 Jun 2008) | 1 line Updated with fix for #3136. ........ r64420 | andrew.kuchling | 2008-06-19 21:05:57 -0500 (Thu, 19 Jun 2008) | 1 line Various items ........ r64421 | andrew.kuchling | 2008-06-19 21:11:42 -0500 (Thu, 19 Jun 2008) | 1 line Fix comment typos ........ r64425 | andrew.kuchling | 2008-06-20 06:39:54 -0500 (Fri, 20 Jun 2008) | 1 line Various items ........ r64426 | mark.dickinson | 2008-06-20 09:53:43 -0500 (Fri, 20 Jun 2008) | 4 lines Issue #3004: Minor fix to slice.indices(). slice(-10).indices(9) now returns (0, 0, 1) instead of (0, -1, 1), and slice(None, 10, -1).indices(10) returns (9, 9, -1) instead of (9, 10, -1). ........ r64427 | mark.dickinson | 2008-06-20 10:17:41 -0500 (Fri, 20 Jun 2008) | 2 lines Fix outdated count of the number of new math module functions. ........ r64428 | mark.dickinson | 2008-06-20 10:26:19 -0500 (Fri, 20 Jun 2008) | 2 lines Fix another typo in math_sum comment ........
2008-07-02 13:11:42 -03:00
Note 3: The intermediate values lo, yr, and hi are declared volatile so
aggressive compilers won't algebraically reduce lo to always be exactly 0.0.
Merged revisions 63562,63570,63728,63734,63784,63788,63802,63817,63827,63839,63887,63975,63998 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63562 | martin.v.loewis | 2008-05-23 17:06:50 +0200 (Fri, 23 May 2008) | 2 lines Patch #1722225: Support QNX 6. ........ r63570 | trent.nelson | 2008-05-23 22:33:14 +0200 (Fri, 23 May 2008) | 1 line Introduce a user macro named $(externalsDir), which should point to the root directory of where all the external sources should live. Developers can change this value if their external sources live elsewhere. The default of '..\..' matches the current status quo. ........ r63728 | gregory.p.smith | 2008-05-26 23:16:34 +0200 (Mon, 26 May 2008) | 4 lines Fix issue2589: there was a potential integer overflow leading to memory corruption on esoteric platforms and incorrect behavior on normal platforms. ........ r63734 | gregory.p.smith | 2008-05-27 00:07:28 +0200 (Tue, 27 May 2008) | 3 lines Fix issue2588: Do not execute str[size-1] = '\0' when a 0 size is passed in. (The assert won't prevent this in non-debug builds). ........ r63784 | raymond.hettinger | 2008-05-29 10:38:23 +0200 (Thu, 29 May 2008) | 1 line Fix two typos. ........ r63788 | facundo.batista | 2008-05-29 18:39:26 +0200 (Thu, 29 May 2008) | 6 lines Fixed the semantic of timeout for socket.create_connection and all the upper level libraries that use it, including urllib2. Added and fixed some tests, and changed docs correspondingly. Thanks to John J Lee for the patch and the pusing, :) ........ r63802 | mark.dickinson | 2008-05-30 04:46:53 +0200 (Fri, 30 May 2008) | 2 lines Fix typo in testSum ........ r63817 | raymond.hettinger | 2008-05-30 20:20:50 +0200 (Fri, 30 May 2008) | 8 lines * Mark intermedidate computes values (hi, lo, yr) as volatile. * Expand comments. * Swap variable names in the sum_exact code so that x and y are consistently chosen as the larger and smaller magnitude values respectively. ........ r63827 | raymond.hettinger | 2008-05-31 05:24:31 +0200 (Sat, 31 May 2008) | 1 line Implement heapq in terms of less-than (to match list.sort()). ........ r63839 | gerhard.haering | 2008-05-31 23:33:27 +0200 (Sat, 31 May 2008) | 2 lines Fixed rowcount for SELECT statements. They're -1 now (again), for better DB-API 2.0 compliance. ........ r63887 | gregory.p.smith | 2008-06-02 06:05:52 +0200 (Mon, 02 Jun 2008) | 4 lines Fix issue 2782: be less strict about the format string type in strftime. Accept unicode and anything else ParseTuple "s#" can deal with. This matches the time.strftime behavior. ........ r63975 | neal.norwitz | 2008-06-06 06:47:01 +0200 (Fri, 06 Jun 2008) | 3 lines Aldo Cortesi confirmed this is still needed for OpenBSD 4.2 and 4.3. (I didn't regen configure, since I don't have a working autoconf.) ........ r63998 | raymond.hettinger | 2008-06-06 23:47:51 +0200 (Fri, 06 Jun 2008) | 1 line Issue 3501: Make heapq support both __le__ and __lt__. ........
2008-06-10 14:40:04 -03:00
Also, the volatile declaration forces the values to be stored in memory as
regular doubles instead of extended long precision (80-bit) values. This
Merged revisions 64365,64370,64406,64408-64409,64412,64416-64417,64420-64421,64425-64428 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r64365 | raymond.hettinger | 2008-06-17 19:56:57 -0500 (Tue, 17 Jun 2008) | 1 line Fix double decref. ........ r64370 | mark.dickinson | 2008-06-18 04:20:17 -0500 (Wed, 18 Jun 2008) | 2 lines Typo fix ........ r64406 | andrew.kuchling | 2008-06-19 09:02:30 -0500 (Thu, 19 Jun 2008) | 1 line Only include update_lines_cols() function when it's actually going to be used ........ r64408 | amaury.forgeotdarc | 2008-06-19 14:57:39 -0500 (Thu, 19 Jun 2008) | 2 lines test_macos can be skipped on non-mac platforms. ........ r64409 | andrew.kuchling | 2008-06-19 15:33:31 -0500 (Thu, 19 Jun 2008) | 1 line Put threading in front of thread ........ r64412 | amaury.forgeotdarc | 2008-06-19 16:17:12 -0500 (Thu, 19 Jun 2008) | 3 lines In test_site, correctly escape backslashes in path names. This allows the test to pass when the username begins with a lowercase 't'... ........ r64416 | vinay.sajip | 2008-06-19 17:40:17 -0500 (Thu, 19 Jun 2008) | 2 lines Bug #3136: fileConfig()'s disabling of old loggers is now conditional via an optional disable_existing_loggers parameter, but the default value is such that the old behaviour is preserved. Thanks to Leandro Lucarella for the patch. ........ r64417 | vinay.sajip | 2008-06-19 17:41:08 -0500 (Thu, 19 Jun 2008) | 1 line Updated with fix for #3136. ........ r64420 | andrew.kuchling | 2008-06-19 21:05:57 -0500 (Thu, 19 Jun 2008) | 1 line Various items ........ r64421 | andrew.kuchling | 2008-06-19 21:11:42 -0500 (Thu, 19 Jun 2008) | 1 line Fix comment typos ........ r64425 | andrew.kuchling | 2008-06-20 06:39:54 -0500 (Fri, 20 Jun 2008) | 1 line Various items ........ r64426 | mark.dickinson | 2008-06-20 09:53:43 -0500 (Fri, 20 Jun 2008) | 4 lines Issue #3004: Minor fix to slice.indices(). slice(-10).indices(9) now returns (0, 0, 1) instead of (0, -1, 1), and slice(None, 10, -1).indices(10) returns (9, 9, -1) instead of (9, 10, -1). ........ r64427 | mark.dickinson | 2008-06-20 10:17:41 -0500 (Fri, 20 Jun 2008) | 2 lines Fix outdated count of the number of new math module functions. ........ r64428 | mark.dickinson | 2008-06-20 10:26:19 -0500 (Fri, 20 Jun 2008) | 2 lines Fix another typo in math_sum comment ........
2008-07-02 13:11:42 -03:00
prevents double rounding because any addition or subtraction of two doubles
can be resolved exactly into double-sized hi and lo values. As long as the
Merged revisions 63562,63570,63728,63734,63784,63788,63802,63817,63827,63839,63887,63975,63998 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63562 | martin.v.loewis | 2008-05-23 17:06:50 +0200 (Fri, 23 May 2008) | 2 lines Patch #1722225: Support QNX 6. ........ r63570 | trent.nelson | 2008-05-23 22:33:14 +0200 (Fri, 23 May 2008) | 1 line Introduce a user macro named $(externalsDir), which should point to the root directory of where all the external sources should live. Developers can change this value if their external sources live elsewhere. The default of '..\..' matches the current status quo. ........ r63728 | gregory.p.smith | 2008-05-26 23:16:34 +0200 (Mon, 26 May 2008) | 4 lines Fix issue2589: there was a potential integer overflow leading to memory corruption on esoteric platforms and incorrect behavior on normal platforms. ........ r63734 | gregory.p.smith | 2008-05-27 00:07:28 +0200 (Tue, 27 May 2008) | 3 lines Fix issue2588: Do not execute str[size-1] = '\0' when a 0 size is passed in. (The assert won't prevent this in non-debug builds). ........ r63784 | raymond.hettinger | 2008-05-29 10:38:23 +0200 (Thu, 29 May 2008) | 1 line Fix two typos. ........ r63788 | facundo.batista | 2008-05-29 18:39:26 +0200 (Thu, 29 May 2008) | 6 lines Fixed the semantic of timeout for socket.create_connection and all the upper level libraries that use it, including urllib2. Added and fixed some tests, and changed docs correspondingly. Thanks to John J Lee for the patch and the pusing, :) ........ r63802 | mark.dickinson | 2008-05-30 04:46:53 +0200 (Fri, 30 May 2008) | 2 lines Fix typo in testSum ........ r63817 | raymond.hettinger | 2008-05-30 20:20:50 +0200 (Fri, 30 May 2008) | 8 lines * Mark intermedidate computes values (hi, lo, yr) as volatile. * Expand comments. * Swap variable names in the sum_exact code so that x and y are consistently chosen as the larger and smaller magnitude values respectively. ........ r63827 | raymond.hettinger | 2008-05-31 05:24:31 +0200 (Sat, 31 May 2008) | 1 line Implement heapq in terms of less-than (to match list.sort()). ........ r63839 | gerhard.haering | 2008-05-31 23:33:27 +0200 (Sat, 31 May 2008) | 2 lines Fixed rowcount for SELECT statements. They're -1 now (again), for better DB-API 2.0 compliance. ........ r63887 | gregory.p.smith | 2008-06-02 06:05:52 +0200 (Mon, 02 Jun 2008) | 4 lines Fix issue 2782: be less strict about the format string type in strftime. Accept unicode and anything else ParseTuple "s#" can deal with. This matches the time.strftime behavior. ........ r63975 | neal.norwitz | 2008-06-06 06:47:01 +0200 (Fri, 06 Jun 2008) | 3 lines Aldo Cortesi confirmed this is still needed for OpenBSD 4.2 and 4.3. (I didn't regen configure, since I don't have a working autoconf.) ........ r63998 | raymond.hettinger | 2008-06-06 23:47:51 +0200 (Fri, 06 Jun 2008) | 1 line Issue 3501: Make heapq support both __le__ and __lt__. ........
2008-06-10 14:40:04 -03:00
hi value gets forced into a double before yr and lo are computed, the extra
bits in downstream extended precision operations (x87 for example) will be
exactly zero and therefore can be losslessly stored back into a double,
thereby preventing double rounding.
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
Note 4: A similar implementation is in Modules/cmathmodule.c.
Be sure to update both when making changes.
Note 5: The signature of math.fsum() differs from builtins.sum()
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
because the start argument doesn't make sense in the context of
accurate summation. Since the partials table is collapsed before
returning a result, sum(seq2, start=sum(seq1)) may not equal the
accurate result returned by sum(itertools.chain(seq1, seq2)).
*/
#define NUM_PARTIALS 32 /* initial partials array size, on stack */
/* Extend the partials array p[] by doubling its size. */
static int /* non-zero on error */
Merged revisions 65258,65292,65299,65308-65309,65315,65326 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r65258 | mark.dickinson | 2008-07-27 08:15:29 +0100 (Sun, 27 Jul 2008) | 4 lines Remove math.sum tests related to overflow, special values, and behaviour near the extremes of the floating-point range. (The behaviour of math.sum should be regarded as undefined in these cases.) ........ r65292 | mark.dickinson | 2008-07-29 19:45:38 +0100 (Tue, 29 Jul 2008) | 4 lines More modifications to tests for math.sum: replace the Python version of msum by a version using a different algorithm, and use the new float.fromhex method to specify test results exactly. ........ r65299 | mark.dickinson | 2008-07-30 13:01:41 +0100 (Wed, 30 Jul 2008) | 5 lines Fix special-value handling for math.sum. Also minor cleanups to the code: fix tabbing, remove trailing whitespace, and reformat to fit into 80 columns. ........ r65308 | mark.dickinson | 2008-07-30 17:20:10 +0100 (Wed, 30 Jul 2008) | 2 lines Rename math.sum to math.fsum ........ r65309 | mark.dickinson | 2008-07-30 17:25:16 +0100 (Wed, 30 Jul 2008) | 3 lines Replace math.sum with math.fsum in a couple of comments that were missed by r65308 ........ r65315 | mark.dickinson | 2008-07-30 21:23:15 +0100 (Wed, 30 Jul 2008) | 2 lines Add note about problems with math.fsum on x86 hardware. ........ r65326 | mark.dickinson | 2008-07-31 15:48:32 +0100 (Thu, 31 Jul 2008) | 2 lines Rename testSum to testFsum and move it to proper place in test_math.py ........
2008-08-01 05:16:13 -03:00
_fsum_realloc(double **p_ptr, Py_ssize_t n,
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
double *ps, Py_ssize_t *m_ptr)
{
void *v = NULL;
Py_ssize_t m = *m_ptr;
m += m; /* double */
if (n < m && (size_t)m < ((size_t)PY_SSIZE_T_MAX / sizeof(double))) {
double *p = *p_ptr;
if (p == ps) {
v = PyMem_Malloc(sizeof(double) * m);
if (v != NULL)
memcpy(v, ps, sizeof(double) * n);
}
else
v = PyMem_Realloc(p, sizeof(double) * m);
}
if (v == NULL) { /* size overflow or no memory */
PyErr_SetString(PyExc_MemoryError, "math.fsum partials");
return 1;
}
*p_ptr = (double*) v;
*m_ptr = m;
return 0;
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
}
/* Full precision summation of a sequence of floats.
def msum(iterable):
partials = [] # sorted, non-overlapping partial sums
for x in iterable:
i = 0
for y in partials:
if abs(x) < abs(y):
x, y = y, x
hi = x + y
lo = y - (hi - x)
if lo:
partials[i] = lo
i += 1
x = hi
partials[i:] = [x]
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
return sum_exact(partials)
Rounded x+y stored in hi with the roundoff stored in lo. Together hi+lo
are exactly equal to x+y. The inner loop applies hi/lo summation to each
partial so that the list of partial sums remains exact.
Sum_exact() adds the partial sums exactly and correctly rounds the final
result (using the round-half-to-even rule). The items in partials remain
non-zero, non-special, non-overlapping and strictly increasing in
magnitude, but possibly not all having the same sign.
Depends on IEEE 754 arithmetic guarantees and half-even rounding.
*/
/*[clinic input]
math.fsum
seq: object
/
Return an accurate floating point sum of values in the iterable seq.
Assumes IEEE-754 floating point arithmetic.
[clinic start generated code]*/
static PyObject *
math_fsum(PyObject *module, PyObject *seq)
/*[clinic end generated code: output=ba5c672b87fe34fc input=c51b7d8caf6f6e82]*/
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
{
PyObject *item, *iter, *sum = NULL;
Py_ssize_t i, j, n = 0, m = NUM_PARTIALS;
double x, y, t, ps[NUM_PARTIALS], *p = ps;
double xsave, special_sum = 0.0, inf_sum = 0.0;
volatile double hi, yr, lo;
iter = PyObject_GetIter(seq);
if (iter == NULL)
return NULL;
PyFPE_START_PROTECT("fsum", Py_DECREF(iter); return NULL)
for(;;) { /* for x in iterable */
assert(0 <= n && n <= m);
assert((m == NUM_PARTIALS && p == ps) ||
(m > NUM_PARTIALS && p != NULL));
item = PyIter_Next(iter);
if (item == NULL) {
if (PyErr_Occurred())
goto _fsum_error;
break;
}
ASSIGN_DOUBLE(x, item, error_with_item);
Py_DECREF(item);
xsave = x;
for (i = j = 0; j < n; j++) { /* for y in partials */
y = p[j];
if (fabs(x) < fabs(y)) {
t = x; x = y; y = t;
}
hi = x + y;
yr = hi - x;
lo = y - yr;
if (lo != 0.0)
p[i++] = lo;
x = hi;
}
n = i; /* ps[i:] = [x] */
if (x != 0.0) {
if (! Py_IS_FINITE(x)) {
/* a nonfinite x could arise either as
a result of intermediate overflow, or
as a result of a nan or inf in the
summands */
if (Py_IS_FINITE(xsave)) {
PyErr_SetString(PyExc_OverflowError,
"intermediate overflow in fsum");
goto _fsum_error;
}
if (Py_IS_INFINITY(xsave))
inf_sum += xsave;
special_sum += xsave;
/* reset partials */
n = 0;
}
else if (n >= m && _fsum_realloc(&p, n, ps, &m))
goto _fsum_error;
else
p[n++] = x;
}
}
if (special_sum != 0.0) {
if (Py_IS_NAN(inf_sum))
PyErr_SetString(PyExc_ValueError,
"-inf + inf in fsum");
else
sum = PyFloat_FromDouble(special_sum);
goto _fsum_error;
}
hi = 0.0;
if (n > 0) {
hi = p[--n];
/* sum_exact(ps, hi) from the top, stop when the sum becomes
inexact. */
while (n > 0) {
x = hi;
y = p[--n];
assert(fabs(y) < fabs(x));
hi = x + y;
yr = hi - x;
lo = y - yr;
if (lo != 0.0)
break;
}
/* Make half-even rounding work across multiple partials.
Needed so that sum([1e-16, 1, 1e16]) will round-up the last
digit to two instead of down to zero (the 1e-16 makes the 1
slightly closer to two). With a potential 1 ULP rounding
error fixed-up, math.fsum() can guarantee commutativity. */
if (n > 0 && ((lo < 0.0 && p[n-1] < 0.0) ||
(lo > 0.0 && p[n-1] > 0.0))) {
y = lo * 2.0;
x = hi + y;
yr = x - hi;
if (y == yr)
hi = x;
}
}
sum = PyFloat_FromDouble(hi);
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
_fsum_error:
PyFPE_END_PROTECT(hi)
Py_DECREF(iter);
if (p != ps)
PyMem_Free(p);
return sum;
error_with_item:
Py_DECREF(item);
goto _fsum_error;
Merged revisions 63542-63544,63546,63553,63563-63564,63567,63569,63576 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r63542 | mark.dickinson | 2008-05-22 20:35:30 -0500 (Thu, 22 May 2008) | 5 lines Issue #2819: Add math.sum, a function that sums a sequence of floats efficiently but with no intermediate loss of precision. Based on Raymond Hettinger's ASPN recipe. Thanks Jean Brouwers for the patch. ........ r63543 | mark.dickinson | 2008-05-22 21:36:48 -0500 (Thu, 22 May 2008) | 2 lines Add tests for math.sum (Issue #2819) ........ r63544 | mark.dickinson | 2008-05-22 22:30:01 -0500 (Thu, 22 May 2008) | 2 lines Better error reporting in test_math.py ........ r63546 | raymond.hettinger | 2008-05-22 23:32:43 -0500 (Thu, 22 May 2008) | 1 line Tweak the comments and formatting. ........ r63553 | mark.dickinson | 2008-05-23 07:07:36 -0500 (Fri, 23 May 2008) | 3 lines Skip math.sum tests on non IEEE 754 platforms, and on IEEE 754 platforms that exhibit the problem described in issue #2937. ........ r63563 | martin.v.loewis | 2008-05-23 10:18:28 -0500 (Fri, 23 May 2008) | 3 lines Issue #1390: Raise ValueError in toxml when an invalid comment would otherwise be produced. ........ r63564 | raymond.hettinger | 2008-05-23 12:21:44 -0500 (Fri, 23 May 2008) | 1 line Issue 2909: show how to name unpacked fields. ........ r63567 | raymond.hettinger | 2008-05-23 12:34:34 -0500 (Fri, 23 May 2008) | 1 line Fix typo ........ r63569 | martin.v.loewis | 2008-05-23 14:33:13 -0500 (Fri, 23 May 2008) | 3 lines Mention that the leaking of variables from list comprehensions is fixed in 3.0. ........ r63576 | martin.v.loewis | 2008-05-24 04:36:45 -0500 (Sat, 24 May 2008) | 3 lines Don't try to get the window size if it was never set before. Fixes the test failure on Solaris. ........
2008-05-26 14:36:47 -03:00
}
#undef NUM_PARTIALS
/* Return the smallest integer k such that n < 2**k, or 0 if n == 0.
* Equivalent to floor(lg(x))+1. Also equivalent to: bitwidth_of_type -
* count_leading_zero_bits(x)
*/
/* XXX: This routine does more or less the same thing as
* bits_in_digit() in Objects/longobject.c. Someday it would be nice to
* consolidate them. On BSD, there's a library function called fls()
* that we could use, and GCC provides __builtin_clz().
*/
static unsigned long
bit_length(unsigned long n)
{
unsigned long len = 0;
while (n != 0) {
++len;
n >>= 1;
}
return len;
}
static unsigned long
count_set_bits(unsigned long n)
{
unsigned long count = 0;
while (n != 0) {
++count;
n &= n - 1; /* clear least significant bit */
}
return count;
}
/* Divide-and-conquer factorial algorithm
*
* Based on the formula and pseudo-code provided at:
* http://www.luschny.de/math/factorial/binarysplitfact.html
*
* Faster algorithms exist, but they're more complicated and depend on
2010-07-08 12:03:02 -03:00
* a fast prime factorization algorithm.
*
* Notes on the algorithm
* ----------------------
*
* factorial(n) is written in the form 2**k * m, with m odd. k and m are
* computed separately, and then combined using a left shift.
*
* The function factorial_odd_part computes the odd part m (i.e., the greatest
* odd divisor) of factorial(n), using the formula:
*
* factorial_odd_part(n) =
*
* product_{i >= 0} product_{0 < j <= n / 2**i, j odd} j
*
* Example: factorial_odd_part(20) =
*
* (1) *
* (1) *
* (1 * 3 * 5) *
* (1 * 3 * 5 * 7 * 9)
* (1 * 3 * 5 * 7 * 9 * 11 * 13 * 15 * 17 * 19)
*
* Here i goes from large to small: the first term corresponds to i=4 (any
* larger i gives an empty product), and the last term corresponds to i=0.
* Each term can be computed from the last by multiplying by the extra odd
* numbers required: e.g., to get from the penultimate term to the last one,
* we multiply by (11 * 13 * 15 * 17 * 19).
*
* To see a hint of why this formula works, here are the same numbers as above
* but with the even parts (i.e., the appropriate powers of 2) included. For
* each subterm in the product for i, we multiply that subterm by 2**i:
*
* factorial(20) =
*
* (16) *
* (8) *
* (4 * 12 * 20) *
* (2 * 6 * 10 * 14 * 18) *
* (1 * 3 * 5 * 7 * 9 * 11 * 13 * 15 * 17 * 19)
*
* The factorial_partial_product function computes the product of all odd j in
* range(start, stop) for given start and stop. It's used to compute the
* partial products like (11 * 13 * 15 * 17 * 19) in the example above. It
* operates recursively, repeatedly splitting the range into two roughly equal
* pieces until the subranges are small enough to be computed using only C
* integer arithmetic.
*
* The two-valuation k (i.e., the exponent of the largest power of 2 dividing
* the factorial) is computed independently in the main math_factorial
* function. By standard results, its value is:
*
* two_valuation = n//2 + n//4 + n//8 + ....
*
* It can be shown (e.g., by complete induction on n) that two_valuation is
* equal to n - count_set_bits(n), where count_set_bits(n) gives the number of
* '1'-bits in the binary expansion of n.
*/
/* factorial_partial_product: Compute product(range(start, stop, 2)) using
* divide and conquer. Assumes start and stop are odd and stop > start.
* max_bits must be >= bit_length(stop - 2). */
static PyObject *
factorial_partial_product(unsigned long start, unsigned long stop,
unsigned long max_bits)
{
unsigned long midpoint, num_operands;
PyObject *left = NULL, *right = NULL, *result = NULL;
/* If the return value will fit an unsigned long, then we can
* multiply in a tight, fast loop where each multiply is O(1).
* Compute an upper bound on the number of bits required to store
* the answer.
*
* Storing some integer z requires floor(lg(z))+1 bits, which is
* conveniently the value returned by bit_length(z). The
* product x*y will require at most
* bit_length(x) + bit_length(y) bits to store, based
* on the idea that lg product = lg x + lg y.
*
* We know that stop - 2 is the largest number to be multiplied. From
* there, we have: bit_length(answer) <= num_operands *
* bit_length(stop - 2)
*/
num_operands = (stop - start) / 2;
/* The "num_operands <= 8 * SIZEOF_LONG" check guards against the
* unlikely case of an overflow in num_operands * max_bits. */
if (num_operands <= 8 * SIZEOF_LONG &&
num_operands * max_bits <= 8 * SIZEOF_LONG) {
unsigned long j, total;
for (total = start, j = start + 2; j < stop; j += 2)
total *= j;
return PyLong_FromUnsignedLong(total);
}
/* find midpoint of range(start, stop), rounded up to next odd number. */
midpoint = (start + num_operands) | 1;
left = factorial_partial_product(start, midpoint,
bit_length(midpoint - 2));
if (left == NULL)
goto error;
right = factorial_partial_product(midpoint, stop, max_bits);
if (right == NULL)
goto error;
result = PyNumber_Multiply(left, right);
error:
Py_XDECREF(left);
Py_XDECREF(right);
return result;
}
/* factorial_odd_part: compute the odd part of factorial(n). */
static PyObject *
factorial_odd_part(unsigned long n)
{
long i;
unsigned long v, lower, upper;
PyObject *partial, *tmp, *inner, *outer;
inner = PyLong_FromLong(1);
if (inner == NULL)
return NULL;
outer = inner;
Py_INCREF(outer);
upper = 3;
for (i = bit_length(n) - 2; i >= 0; i--) {
v = n >> i;
if (v <= 2)
continue;
lower = upper;
/* (v + 1) | 1 = least odd integer strictly larger than n / 2**i */
upper = (v + 1) | 1;
/* Here inner is the product of all odd integers j in the range (0,
n/2**(i+1)]. The factorial_partial_product call below gives the
product of all odd integers j in the range (n/2**(i+1), n/2**i]. */
partial = factorial_partial_product(lower, upper, bit_length(upper-2));
/* inner *= partial */
if (partial == NULL)
goto error;
tmp = PyNumber_Multiply(inner, partial);
Py_DECREF(partial);
if (tmp == NULL)
goto error;
Py_DECREF(inner);
inner = tmp;
/* Now inner is the product of all odd integers j in the range (0,
n/2**i], giving the inner product in the formula above. */
/* outer *= inner; */
tmp = PyNumber_Multiply(outer, inner);
if (tmp == NULL)
goto error;
Py_DECREF(outer);
outer = tmp;
}
Py_DECREF(inner);
return outer;
error:
Py_DECREF(outer);
Py_DECREF(inner);
return NULL;
}
/* Lookup table for small factorial values */
static const unsigned long SmallFactorials[] = {
1, 1, 2, 6, 24, 120, 720, 5040, 40320,
362880, 3628800, 39916800, 479001600,
#if SIZEOF_LONG >= 8
6227020800, 87178291200, 1307674368000,
20922789888000, 355687428096000, 6402373705728000,
121645100408832000, 2432902008176640000
#endif
};
/*[clinic input]
math.factorial
x as arg: object
/
Find x!.
Raise a ValueError if x is negative or non-integral.
[clinic start generated code]*/
Merged revisions 64002-64003,64012,64036-64037,64047,64050-64052,64054-64055,64066,64071 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r64002 | travis.oliphant | 2008-06-07 00:33:21 +0200 (Sat, 07 Jun 2008) | 1 line Add long double check support to configure test. ........ r64003 | travis.oliphant | 2008-06-07 00:39:47 +0200 (Sat, 07 Jun 2008) | 1 line Remove locking part of new buffer protocol. ........ r64012 | facundo.batista | 2008-06-07 15:36:36 +0200 (Sat, 07 Jun 2008) | 4 lines Finished bug #2451. Fixed the retrying part to make it more robust. ........ r64036 | georg.brandl | 2008-06-08 10:54:40 +0200 (Sun, 08 Jun 2008) | 2 lines #3028: tokenize passes the physical line. ........ r64037 | georg.brandl | 2008-06-08 10:59:38 +0200 (Sun, 08 Jun 2008) | 2 lines Argh, I read it wrong. Reverted 64036 and added a clarifying remark. ........ r64047 | raymond.hettinger | 2008-06-09 03:28:30 +0200 (Mon, 09 Jun 2008) | 1 line Issue3065: Fixed pickling of named tuples. Added tests. ........ r64050 | raymond.hettinger | 2008-06-09 08:54:45 +0200 (Mon, 09 Jun 2008) | 1 line Issue #2138: Add math.factorial(). ........ r64051 | raymond.hettinger | 2008-06-09 10:33:37 +0200 (Mon, 09 Jun 2008) | 1 line Let set.union() and set.update() accept multiple inputs. ........ r64052 | raymond.hettinger | 2008-06-09 11:29:17 +0200 (Mon, 09 Jun 2008) | 1 line Address double-rounding scenarios by setting all variables to long doubles. ........ r64054 | raymond.hettinger | 2008-06-09 13:24:47 +0200 (Mon, 09 Jun 2008) | 1 line Unhappy buildbots. Revert 64052. Long doubles have unexpected effects on some builds. ........ r64055 | raymond.hettinger | 2008-06-09 15:07:27 +0200 (Mon, 09 Jun 2008) | 1 line Let set.intersection() and set.intersection_update() take multiple input arguments. ........ r64066 | robert.schuppenies | 2008-06-10 12:10:31 +0200 (Tue, 10 Jun 2008) | 2 lines Issue 3048: Fixed sys.getsizeof for unicode objects. ........ r64071 | thomas.heller | 2008-06-10 16:07:12 +0200 (Tue, 10 Jun 2008) | 3 lines NEWS entry for: Add an optional 'offset' parameter to byref, defaulting to zero. ........
2008-06-10 16:20:26 -03:00
static PyObject *
math_factorial(PyObject *module, PyObject *arg)
/*[clinic end generated code: output=6686f26fae00e9ca input=6d1c8105c0d91fb4]*/
Merged revisions 64002-64003,64012,64036-64037,64047,64050-64052,64054-64055,64066,64071 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r64002 | travis.oliphant | 2008-06-07 00:33:21 +0200 (Sat, 07 Jun 2008) | 1 line Add long double check support to configure test. ........ r64003 | travis.oliphant | 2008-06-07 00:39:47 +0200 (Sat, 07 Jun 2008) | 1 line Remove locking part of new buffer protocol. ........ r64012 | facundo.batista | 2008-06-07 15:36:36 +0200 (Sat, 07 Jun 2008) | 4 lines Finished bug #2451. Fixed the retrying part to make it more robust. ........ r64036 | georg.brandl | 2008-06-08 10:54:40 +0200 (Sun, 08 Jun 2008) | 2 lines #3028: tokenize passes the physical line. ........ r64037 | georg.brandl | 2008-06-08 10:59:38 +0200 (Sun, 08 Jun 2008) | 2 lines Argh, I read it wrong. Reverted 64036 and added a clarifying remark. ........ r64047 | raymond.hettinger | 2008-06-09 03:28:30 +0200 (Mon, 09 Jun 2008) | 1 line Issue3065: Fixed pickling of named tuples. Added tests. ........ r64050 | raymond.hettinger | 2008-06-09 08:54:45 +0200 (Mon, 09 Jun 2008) | 1 line Issue #2138: Add math.factorial(). ........ r64051 | raymond.hettinger | 2008-06-09 10:33:37 +0200 (Mon, 09 Jun 2008) | 1 line Let set.union() and set.update() accept multiple inputs. ........ r64052 | raymond.hettinger | 2008-06-09 11:29:17 +0200 (Mon, 09 Jun 2008) | 1 line Address double-rounding scenarios by setting all variables to long doubles. ........ r64054 | raymond.hettinger | 2008-06-09 13:24:47 +0200 (Mon, 09 Jun 2008) | 1 line Unhappy buildbots. Revert 64052. Long doubles have unexpected effects on some builds. ........ r64055 | raymond.hettinger | 2008-06-09 15:07:27 +0200 (Mon, 09 Jun 2008) | 1 line Let set.intersection() and set.intersection_update() take multiple input arguments. ........ r64066 | robert.schuppenies | 2008-06-10 12:10:31 +0200 (Tue, 10 Jun 2008) | 2 lines Issue 3048: Fixed sys.getsizeof for unicode objects. ........ r64071 | thomas.heller | 2008-06-10 16:07:12 +0200 (Tue, 10 Jun 2008) | 3 lines NEWS entry for: Add an optional 'offset' parameter to byref, defaulting to zero. ........
2008-06-10 16:20:26 -03:00
{
long x;
int overflow;
PyObject *result, *odd_part, *two_valuation, *pyint_form;
if (PyFloat_Check(arg)) {
PyObject *lx;
double dx = PyFloat_AS_DOUBLE((PyFloatObject *)arg);
if (!(Py_IS_FINITE(dx) && dx == floor(dx))) {
PyErr_SetString(PyExc_ValueError,
"factorial() only accepts integral values");
return NULL;
}
lx = PyLong_FromDouble(dx);
if (lx == NULL)
return NULL;
x = PyLong_AsLongAndOverflow(lx, &overflow);
Py_DECREF(lx);
}
else {
pyint_form = PyNumber_Index(arg);
if (pyint_form == NULL) {
return NULL;
}
x = PyLong_AsLongAndOverflow(pyint_form, &overflow);
Py_DECREF(pyint_form);
}
if (x == -1 && PyErr_Occurred()) {
return NULL;
}
else if (overflow == 1) {
PyErr_Format(PyExc_OverflowError,
"factorial() argument should not exceed %ld",
LONG_MAX);
return NULL;
}
else if (overflow == -1 || x < 0) {
PyErr_SetString(PyExc_ValueError,
"factorial() not defined for negative values");
return NULL;
}
/* use lookup table if x is small */
2011-09-28 19:42:28 -03:00
if (x < (long)Py_ARRAY_LENGTH(SmallFactorials))
return PyLong_FromUnsignedLong(SmallFactorials[x]);
/* else express in the form odd_part * 2**two_valuation, and compute as
odd_part << two_valuation. */
odd_part = factorial_odd_part(x);
if (odd_part == NULL)
return NULL;
two_valuation = PyLong_FromLong(x - count_set_bits(x));
if (two_valuation == NULL) {
Py_DECREF(odd_part);
return NULL;
}
result = PyNumber_Lshift(odd_part, two_valuation);
Py_DECREF(two_valuation);
Py_DECREF(odd_part);
return result;
Merged revisions 64002-64003,64012,64036-64037,64047,64050-64052,64054-64055,64066,64071 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r64002 | travis.oliphant | 2008-06-07 00:33:21 +0200 (Sat, 07 Jun 2008) | 1 line Add long double check support to configure test. ........ r64003 | travis.oliphant | 2008-06-07 00:39:47 +0200 (Sat, 07 Jun 2008) | 1 line Remove locking part of new buffer protocol. ........ r64012 | facundo.batista | 2008-06-07 15:36:36 +0200 (Sat, 07 Jun 2008) | 4 lines Finished bug #2451. Fixed the retrying part to make it more robust. ........ r64036 | georg.brandl | 2008-06-08 10:54:40 +0200 (Sun, 08 Jun 2008) | 2 lines #3028: tokenize passes the physical line. ........ r64037 | georg.brandl | 2008-06-08 10:59:38 +0200 (Sun, 08 Jun 2008) | 2 lines Argh, I read it wrong. Reverted 64036 and added a clarifying remark. ........ r64047 | raymond.hettinger | 2008-06-09 03:28:30 +0200 (Mon, 09 Jun 2008) | 1 line Issue3065: Fixed pickling of named tuples. Added tests. ........ r64050 | raymond.hettinger | 2008-06-09 08:54:45 +0200 (Mon, 09 Jun 2008) | 1 line Issue #2138: Add math.factorial(). ........ r64051 | raymond.hettinger | 2008-06-09 10:33:37 +0200 (Mon, 09 Jun 2008) | 1 line Let set.union() and set.update() accept multiple inputs. ........ r64052 | raymond.hettinger | 2008-06-09 11:29:17 +0200 (Mon, 09 Jun 2008) | 1 line Address double-rounding scenarios by setting all variables to long doubles. ........ r64054 | raymond.hettinger | 2008-06-09 13:24:47 +0200 (Mon, 09 Jun 2008) | 1 line Unhappy buildbots. Revert 64052. Long doubles have unexpected effects on some builds. ........ r64055 | raymond.hettinger | 2008-06-09 15:07:27 +0200 (Mon, 09 Jun 2008) | 1 line Let set.intersection() and set.intersection_update() take multiple input arguments. ........ r64066 | robert.schuppenies | 2008-06-10 12:10:31 +0200 (Tue, 10 Jun 2008) | 2 lines Issue 3048: Fixed sys.getsizeof for unicode objects. ........ r64071 | thomas.heller | 2008-06-10 16:07:12 +0200 (Tue, 10 Jun 2008) | 3 lines NEWS entry for: Add an optional 'offset' parameter to byref, defaulting to zero. ........
2008-06-10 16:20:26 -03:00
}
/*[clinic input]
math.trunc
x: object
/
Truncates the Real x to the nearest Integral toward 0.
Uses the __trunc__ magic method.
[clinic start generated code]*/
Merged revisions 64002-64003,64012,64036-64037,64047,64050-64052,64054-64055,64066,64071 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r64002 | travis.oliphant | 2008-06-07 00:33:21 +0200 (Sat, 07 Jun 2008) | 1 line Add long double check support to configure test. ........ r64003 | travis.oliphant | 2008-06-07 00:39:47 +0200 (Sat, 07 Jun 2008) | 1 line Remove locking part of new buffer protocol. ........ r64012 | facundo.batista | 2008-06-07 15:36:36 +0200 (Sat, 07 Jun 2008) | 4 lines Finished bug #2451. Fixed the retrying part to make it more robust. ........ r64036 | georg.brandl | 2008-06-08 10:54:40 +0200 (Sun, 08 Jun 2008) | 2 lines #3028: tokenize passes the physical line. ........ r64037 | georg.brandl | 2008-06-08 10:59:38 +0200 (Sun, 08 Jun 2008) | 2 lines Argh, I read it wrong. Reverted 64036 and added a clarifying remark. ........ r64047 | raymond.hettinger | 2008-06-09 03:28:30 +0200 (Mon, 09 Jun 2008) | 1 line Issue3065: Fixed pickling of named tuples. Added tests. ........ r64050 | raymond.hettinger | 2008-06-09 08:54:45 +0200 (Mon, 09 Jun 2008) | 1 line Issue #2138: Add math.factorial(). ........ r64051 | raymond.hettinger | 2008-06-09 10:33:37 +0200 (Mon, 09 Jun 2008) | 1 line Let set.union() and set.update() accept multiple inputs. ........ r64052 | raymond.hettinger | 2008-06-09 11:29:17 +0200 (Mon, 09 Jun 2008) | 1 line Address double-rounding scenarios by setting all variables to long doubles. ........ r64054 | raymond.hettinger | 2008-06-09 13:24:47 +0200 (Mon, 09 Jun 2008) | 1 line Unhappy buildbots. Revert 64052. Long doubles have unexpected effects on some builds. ........ r64055 | raymond.hettinger | 2008-06-09 15:07:27 +0200 (Mon, 09 Jun 2008) | 1 line Let set.intersection() and set.intersection_update() take multiple input arguments. ........ r64066 | robert.schuppenies | 2008-06-10 12:10:31 +0200 (Tue, 10 Jun 2008) | 2 lines Issue 3048: Fixed sys.getsizeof for unicode objects. ........ r64071 | thomas.heller | 2008-06-10 16:07:12 +0200 (Tue, 10 Jun 2008) | 3 lines NEWS entry for: Add an optional 'offset' parameter to byref, defaulting to zero. ........
2008-06-10 16:20:26 -03:00
static PyObject *
math_trunc(PyObject *module, PyObject *x)
/*[clinic end generated code: output=34b9697b707e1031 input=2168b34e0a09134d]*/
{
_Py_IDENTIFIER(__trunc__);
PyObject *trunc, *result;
if (Py_TYPE(x)->tp_dict == NULL) {
if (PyType_Ready(Py_TYPE(x)) < 0)
return NULL;
}
trunc = _PyObject_LookupSpecial(x, &PyId___trunc__);
if (trunc == NULL) {
if (!PyErr_Occurred())
PyErr_Format(PyExc_TypeError,
"type %.100s doesn't define __trunc__ method",
Py_TYPE(x)->tp_name);
return NULL;
}
result = _PyObject_CallNoArg(trunc);
Py_DECREF(trunc);
return result;
}
/*[clinic input]
math.frexp
x: double
/
Return the mantissa and exponent of x, as pair (m, e).
m is a float and e is an int, such that x = m * 2.**e.
If x is 0, m and e are both 0. Else 0.5 <= abs(m) < 1.0.
[clinic start generated code]*/
1996-12-09 18:32:36 -04:00
static PyObject *
math_frexp_impl(PyObject *module, double x)
/*[clinic end generated code: output=03e30d252a15ad4a input=96251c9e208bc6e9]*/
1991-10-24 11:57:21 -03:00
{
int i;
/* deal with special cases directly, to sidestep platform
differences */
if (Py_IS_NAN(x) || Py_IS_INFINITY(x) || !x) {
i = 0;
}
else {
PyFPE_START_PROTECT("in math_frexp", return 0);
x = frexp(x, &i);
PyFPE_END_PROTECT(x);
}
return Py_BuildValue("(di)", x, i);
1991-10-24 11:57:21 -03:00
}
/*[clinic input]
math.ldexp
x: double
i: object
/
Return x * (2**i).
This is essentially the inverse of frexp().
[clinic start generated code]*/
1996-12-09 18:32:36 -04:00
static PyObject *
math_ldexp_impl(PyObject *module, double x, PyObject *i)
/*[clinic end generated code: output=b6892f3c2df9cc6a input=17d5970c1a40a8c1]*/
1991-10-24 11:57:21 -03:00
{
double r;
long exp;
int overflow;
if (PyLong_Check(i)) {
/* on overflow, replace exponent with either LONG_MAX
or LONG_MIN, depending on the sign. */
exp = PyLong_AsLongAndOverflow(i, &overflow);
if (exp == -1 && PyErr_Occurred())
return NULL;
if (overflow)
exp = overflow < 0 ? LONG_MIN : LONG_MAX;
}
else {
PyErr_SetString(PyExc_TypeError,
"Expected an int as second argument to ldexp.");
return NULL;
}
if (x == 0. || !Py_IS_FINITE(x)) {
/* NaNs, zeros and infinities are returned unchanged */
r = x;
errno = 0;
} else if (exp > INT_MAX) {
/* overflow */
r = copysign(Py_HUGE_VAL, x);
errno = ERANGE;
} else if (exp < INT_MIN) {
/* underflow to +-0 */
r = copysign(0., x);
errno = 0;
} else {
errno = 0;
PyFPE_START_PROTECT("in math_ldexp", return 0);
r = ldexp(x, (int)exp);
PyFPE_END_PROTECT(r);
if (Py_IS_INFINITY(r))
errno = ERANGE;
}
if (errno && is_error(r))
return NULL;
return PyFloat_FromDouble(r);
1991-10-24 11:57:21 -03:00
}
/*[clinic input]
math.modf
x: double
/
Return the fractional and integer parts of x.
Both results carry the sign of x and are floats.
[clinic start generated code]*/
1996-12-09 18:32:36 -04:00
static PyObject *
math_modf_impl(PyObject *module, double x)
/*[clinic end generated code: output=90cee0260014c3c0 input=b4cfb6786afd9035]*/
1991-10-24 11:57:21 -03:00
{
double y;
/* some platforms don't do the right thing for NaNs and
infinities, so we take care of special cases directly. */
if (!Py_IS_FINITE(x)) {
if (Py_IS_INFINITY(x))
return Py_BuildValue("(dd)", copysign(0., x), x);
else if (Py_IS_NAN(x))
return Py_BuildValue("(dd)", x, x);
}
errno = 0;
PyFPE_START_PROTECT("in math_modf", return 0);
x = modf(x, &y);
PyFPE_END_PROTECT(x);
return Py_BuildValue("(dd)", x, y);
1991-10-24 11:57:21 -03:00
}
1990-10-14 09:07:46 -03:00
/* A decent logarithm is easy to compute even for huge ints, but libm can't
do that by itself -- loghelper can. func is log or log10, and name is
"log" or "log10". Note that overflow of the result isn't possible: an int
can contain no more than INT_MAX * SHIFT bits, so has value certainly less
than 2**(2**64 * 2**16) == 2**2**80, and log2 of that is 2**80, which is
small enough to fit in an IEEE single. log and log10 are even smaller.
However, intermediate overflow is possible for an int if the number of bits
in that int is larger than PY_SSIZE_T_MAX. */
static PyObject*
loghelper(PyObject* arg, double (*func)(double), const char *funcname)
{
/* If it is int, do it ourselves. */
if (PyLong_Check(arg)) {
double x, result;
Py_ssize_t e;
/* Negative or zero inputs give a ValueError. */
if (Py_SIZE(arg) <= 0) {
PyErr_SetString(PyExc_ValueError,
"math domain error");
return NULL;
}
x = PyLong_AsDouble(arg);
if (x == -1.0 && PyErr_Occurred()) {
if (!PyErr_ExceptionMatches(PyExc_OverflowError))
return NULL;
/* Here the conversion to double overflowed, but it's possible
to compute the log anyway. Clear the exception and continue. */
PyErr_Clear();
x = _PyLong_Frexp((PyLongObject *)arg, &e);
if (x == -1.0 && PyErr_Occurred())
return NULL;
/* Value is ~= x * 2**e, so the log ~= log(x) + log(2) * e. */
result = func(x) + func(2.0) * e;
}
else
/* Successfully converted x to a double. */
result = func(x);
return PyFloat_FromDouble(result);
}
/* Else let libm handle it by itself. */
return math_1(arg, func, 0);
}
/*[clinic input]
math.log
x: object
[
base: object(c_default="NULL") = math.e
]
/
Return the logarithm of x to the given base.
If the base not specified, returns the natural logarithm (base e) of x.
[clinic start generated code]*/
static PyObject *
math_log_impl(PyObject *module, PyObject *x, int group_right_1,
PyObject *base)
/*[clinic end generated code: output=7b5a39e526b73fc9 input=0f62d5726cbfebbd]*/
{
PyObject *num, *den;
PyObject *ans;
num = loghelper(x, m_log, "log");
if (num == NULL || base == NULL)
return num;
den = loghelper(base, m_log, "log");
if (den == NULL) {
Py_DECREF(num);
return NULL;
}
ans = PyNumber_TrueDivide(num, den);
Py_DECREF(num);
Py_DECREF(den);
return ans;
}
/*[clinic input]
math.log2
x: object
/
Return the base 2 logarithm of x.
[clinic start generated code]*/
static PyObject *
math_log2(PyObject *module, PyObject *x)
/*[clinic end generated code: output=5425899a4d5d6acb input=08321262bae4f39b]*/
{
return loghelper(x, m_log2, "log2");
}
/*[clinic input]
math.log10
x: object
/
Return the base 10 logarithm of x.
[clinic start generated code]*/
static PyObject *
math_log10(PyObject *module, PyObject *x)
/*[clinic end generated code: output=be72a64617df9c6f input=b2469d02c6469e53]*/
{
return loghelper(x, m_log10, "log10");
}
/*[clinic input]
math.fmod
x: double
y: double
/
Return fmod(x, y), according to platform C.
x % y may differ.
[clinic start generated code]*/
static PyObject *
math_fmod_impl(PyObject *module, double x, double y)
/*[clinic end generated code: output=7559d794343a27b5 input=4f84caa8cfc26a03]*/
{
double r;
/* fmod(x, +/-Inf) returns x for finite x. */
if (Py_IS_INFINITY(y) && Py_IS_FINITE(x))
return PyFloat_FromDouble(x);
errno = 0;
PyFPE_START_PROTECT("in math_fmod", return 0);
r = fmod(x, y);
PyFPE_END_PROTECT(r);
if (Py_IS_NAN(r)) {
if (!Py_IS_NAN(x) && !Py_IS_NAN(y))
errno = EDOM;
else
errno = 0;
}
if (errno && is_error(r))
return NULL;
else
return PyFloat_FromDouble(r);
}
/*
Given an *n* length *vec* of values and a value *max*, compute:
max * sqrt(sum((x / max) ** 2 for x in vec))
The value of the *max* variable must be non-negative and
equal to the absolute value of the largest magnitude
entry in the vector. If n==0, then *max* should be 0.0.
If an infinity is present in the vec, *max* should be INF.
The *found_nan* variable indicates whether some member of
the *vec* is a NaN.
To improve accuracy and to increase the number of cases where
vector_norm() is commutative, we use a variant of Neumaier
summation specialized to exploit that we always know that
|csum| >= |x|.
The *csum* variable tracks the cumulative sum and *frac* tracks
the cumulative fractional errors at each step. Since this
variant assumes that |csum| >= |x| at each step, we establish
the precondition by starting the accumulation from 1.0 which
represents the largest possible value of (x/max)**2.
After the loop is finished, the initial 1.0 is subtracted out
for a net zero effect on the final sum. Since *csum* will be
greater than 1.0, the subtraction of 1.0 will not cause
fractional digits to be dropped from *csum*.
*/
static inline double
vector_norm(Py_ssize_t n, double *vec, double max, int found_nan)
{
double x, csum = 1.0, oldcsum, frac = 0.0;
Py_ssize_t i;
if (Py_IS_INFINITY(max)) {
return max;
}
if (found_nan) {
return Py_NAN;
}
if (max == 0.0 || n <= 1) {
return max;
}
for (i=0 ; i < n ; i++) {
x = vec[i];
assert(Py_IS_FINITE(x) && fabs(x) <= max);
x /= max;
x = x*x;
oldcsum = csum;
csum += x;
assert(csum >= x);
frac += (oldcsum - csum) + x;
}
return max * sqrt(csum - 1.0 + frac);
}
#define NUM_STACK_ELEMS 16
/*[clinic input]
math.dist
p: object(subclass_of='&PyTuple_Type')
q: object(subclass_of='&PyTuple_Type')
/
Return the Euclidean distance between two points p and q.
The points should be specified as tuples of coordinates.
Both tuples must be the same size.
Roughly equivalent to:
sqrt(sum((px - qx) ** 2.0 for px, qx in zip(p, q)))
[clinic start generated code]*/
static PyObject *
math_dist_impl(PyObject *module, PyObject *p, PyObject *q)
/*[clinic end generated code: output=56bd9538d06bbcfe input=937122eaa5f19272]*/
{
PyObject *item;
double max = 0.0;
double x, px, qx, result;
Py_ssize_t i, m, n;
int found_nan = 0;
double diffs_on_stack[NUM_STACK_ELEMS];
double *diffs = diffs_on_stack;
m = PyTuple_GET_SIZE(p);
n = PyTuple_GET_SIZE(q);
if (m != n) {
PyErr_SetString(PyExc_ValueError,
"both points must have the same number of dimensions");
return NULL;
}
if (n > NUM_STACK_ELEMS) {
diffs = (double *) PyObject_Malloc(n * sizeof(double));
if (diffs == NULL) {
return PyErr_NoMemory();
}
}
for (i=0 ; i<n ; i++) {
item = PyTuple_GET_ITEM(p, i);
ASSIGN_DOUBLE(px, item, error_exit);
item = PyTuple_GET_ITEM(q, i);
ASSIGN_DOUBLE(qx, item, error_exit);
x = fabs(px - qx);
diffs[i] = x;
found_nan |= Py_IS_NAN(x);
if (x > max) {
max = x;
}
}
result = vector_norm(n, diffs, max, found_nan);
if (diffs != diffs_on_stack) {
PyObject_Free(diffs);
}
return PyFloat_FromDouble(result);
error_exit:
if (diffs != diffs_on_stack) {
PyObject_Free(diffs);
}
return NULL;
}
/* AC: cannot convert yet, waiting for *args support */
static PyObject *
math_hypot(PyObject *self, PyObject *const *args, Py_ssize_t nargs)
{
Py_ssize_t i;
PyObject *item;
double max = 0.0;
double x, result;
int found_nan = 0;
double coord_on_stack[NUM_STACK_ELEMS];
double *coordinates = coord_on_stack;
if (nargs > NUM_STACK_ELEMS) {
coordinates = (double *) PyObject_Malloc(nargs * sizeof(double));
if (coordinates == NULL) {
return PyErr_NoMemory();
}
}
for (i = 0; i < nargs; i++) {
item = args[i];
ASSIGN_DOUBLE(x, item, error_exit);
x = fabs(x);
coordinates[i] = x;
found_nan |= Py_IS_NAN(x);
if (x > max) {
max = x;
}
}
result = vector_norm(nargs, coordinates, max, found_nan);
if (coordinates != coord_on_stack) {
PyObject_Free(coordinates);
}
return PyFloat_FromDouble(result);
error_exit:
if (coordinates != coord_on_stack) {
PyObject_Free(coordinates);
}
return NULL;
}
#undef NUM_STACK_ELEMS
PyDoc_STRVAR(math_hypot_doc,
"hypot(*coordinates) -> value\n\n\
Multidimensional Euclidean distance from the origin to a point.\n\
\n\
Roughly equivalent to:\n\
sqrt(sum(x**2 for x in coordinates))\n\
\n\
For a two dimensional point (x, y), gives the hypotenuse\n\
using the Pythagorean theorem: sqrt(x*x + y*y).\n\
\n\
For example, the hypotenuse of a 3/4/5 right triangle is:\n\
\n\
>>> hypot(3.0, 4.0)\n\
5.0\n\
");
/* pow can't use math_2, but needs its own wrapper: the problem is
that an infinite result can arise either as a result of overflow
(in which case OverflowError should be raised) or as a result of
e.g. 0.**-5. (for which ValueError needs to be raised.)
*/
/*[clinic input]
math.pow
x: double
y: double
/
Return x**y (x to the power of y).
[clinic start generated code]*/
static PyObject *
math_pow_impl(PyObject *module, double x, double y)
/*[clinic end generated code: output=fff93e65abccd6b0 input=c26f1f6075088bfd]*/
{
double r;
int odd_y;
/* deal directly with IEEE specials, to cope with problems on various
platforms whose semantics don't exactly match C99 */
r = 0.; /* silence compiler warning */
if (!Py_IS_FINITE(x) || !Py_IS_FINITE(y)) {
errno = 0;
if (Py_IS_NAN(x))
r = y == 0. ? 1. : x; /* NaN**0 = 1 */
else if (Py_IS_NAN(y))
r = x == 1. ? 1. : y; /* 1**NaN = 1 */
else if (Py_IS_INFINITY(x)) {
odd_y = Py_IS_FINITE(y) && fmod(fabs(y), 2.0) == 1.0;
if (y > 0.)
r = odd_y ? x : fabs(x);
else if (y == 0.)
r = 1.;
else /* y < 0. */
r = odd_y ? copysign(0., x) : 0.;
}
else if (Py_IS_INFINITY(y)) {
if (fabs(x) == 1.0)
r = 1.;
else if (y > 0. && fabs(x) > 1.0)
r = y;
else if (y < 0. && fabs(x) < 1.0) {
r = -y; /* result is +inf */
if (x == 0.) /* 0**-inf: divide-by-zero */
errno = EDOM;
}
else
r = 0.;
}
}
else {
/* let libm handle finite**finite */
errno = 0;
PyFPE_START_PROTECT("in math_pow", return 0);
r = pow(x, y);
PyFPE_END_PROTECT(r);
/* a NaN result should arise only from (-ve)**(finite
non-integer); in this case we want to raise ValueError. */
if (!Py_IS_FINITE(r)) {
if (Py_IS_NAN(r)) {
errno = EDOM;
}
/*
an infinite result here arises either from:
(A) (+/-0.)**negative (-> divide-by-zero)
(B) overflow of x**y with x and y finite
*/
else if (Py_IS_INFINITY(r)) {
if (x == 0.)
errno = EDOM;
else
errno = ERANGE;
}
}
}
if (errno && is_error(r))
return NULL;
else
return PyFloat_FromDouble(r);
}
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
static const double degToRad = Py_MATH_PI / 180.0;
static const double radToDeg = 180.0 / Py_MATH_PI;
/*[clinic input]
math.degrees
x: double
/
Convert angle x from radians to degrees.
[clinic start generated code]*/
static PyObject *
math_degrees_impl(PyObject *module, double x)
/*[clinic end generated code: output=7fea78b294acd12f input=81e016555d6e3660]*/
{
return PyFloat_FromDouble(x * radToDeg);
}
/*[clinic input]
math.radians
x: double
/
Convert angle x from degrees to radians.
[clinic start generated code]*/
static PyObject *
math_radians_impl(PyObject *module, double x)
/*[clinic end generated code: output=34daa47caf9b1590 input=91626fc489fe3d63]*/
{
return PyFloat_FromDouble(x * degToRad);
}
/*[clinic input]
math.isfinite
x: double
/
Return True if x is neither an infinity nor a NaN, and False otherwise.
[clinic start generated code]*/
static PyObject *
math_isfinite_impl(PyObject *module, double x)
/*[clinic end generated code: output=8ba1f396440c9901 input=46967d254812e54a]*/
{
return PyBool_FromLong((long)Py_IS_FINITE(x));
}
/*[clinic input]
math.isnan
x: double
/
Return True if x is a NaN (not a number), and False otherwise.
[clinic start generated code]*/
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
static PyObject *
math_isnan_impl(PyObject *module, double x)
/*[clinic end generated code: output=f537b4d6df878c3e input=935891e66083f46a]*/
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
{
return PyBool_FromLong((long)Py_IS_NAN(x));
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
}
/*[clinic input]
math.isinf
x: double
/
Return True if x is a positive or negative infinity, and False otherwise.
[clinic start generated code]*/
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
static PyObject *
math_isinf_impl(PyObject *module, double x)
/*[clinic end generated code: output=9f00cbec4de7b06b input=32630e4212cf961f]*/
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
{
return PyBool_FromLong((long)Py_IS_INFINITY(x));
Merged revisions 59666-59679 via svnmerge from svn+ssh://pythondev@svn.python.org/python/trunk ........ r59666 | christian.heimes | 2008-01-02 19:28:32 +0100 (Wed, 02 Jan 2008) | 1 line Made vs9to8 Unix compatible ........ r59669 | guido.van.rossum | 2008-01-02 20:00:46 +0100 (Wed, 02 Jan 2008) | 2 lines Patch #1696. Don't attempt to close None in dry-run mode. ........ r59671 | jeffrey.yasskin | 2008-01-03 03:21:52 +0100 (Thu, 03 Jan 2008) | 6 lines Backport PEP 3141 from the py3k branch to the trunk. This includes r50877 (just the complex_pow part), r56649, r56652, r56715, r57296, r57302, r57359, r57361, r57372, r57738, r57739, r58017, r58039, r58040, and r59390, and new documentation. The only significant difference is that round(x) returns a float to preserve backward-compatibility. See http://bugs.python.org/issue1689. ........ r59672 | christian.heimes | 2008-01-03 16:41:30 +0100 (Thu, 03 Jan 2008) | 1 line Issue #1726: Remove Python/atof.c from PCBuild/pythoncore.vcproj ........ r59675 | guido.van.rossum | 2008-01-03 20:12:44 +0100 (Thu, 03 Jan 2008) | 4 lines Issue #1700, reported by Nguyen Quan Son, fix by Fredruk Lundh: Regular Expression inline flags not handled correctly for some unicode characters. (Forward port from 2.5.2.) ........ r59676 | christian.heimes | 2008-01-03 21:23:15 +0100 (Thu, 03 Jan 2008) | 1 line Added math.isinf() and math.isnan() ........ r59677 | christian.heimes | 2008-01-03 22:14:48 +0100 (Thu, 03 Jan 2008) | 1 line Some build bots don't compile mathmodule. There is an issue with the long definition of pi and euler ........ r59678 | christian.heimes | 2008-01-03 23:16:32 +0100 (Thu, 03 Jan 2008) | 2 lines Modified PyImport_Import and PyImport_ImportModule to always use absolute imports by calling __import__ with an explicit level of 0 Added a new API function PyImport_ImportModuleNoBlock. It solves the problem with dead locks when mixing threads and imports ........ r59679 | christian.heimes | 2008-01-03 23:32:26 +0100 (Thu, 03 Jan 2008) | 1 line Added copysign(x, y) function to the math module ........
2008-01-03 19:01:04 -04:00
}
/*[clinic input]
math.isclose -> bool
a: double
b: double
*
rel_tol: double = 1e-09
maximum difference for being considered "close", relative to the
magnitude of the input values
abs_tol: double = 0.0
maximum difference for being considered "close", regardless of the
magnitude of the input values
Determine whether two floating point numbers are close in value.
Return True if a is close in value to b, and False otherwise.
For the values to be considered close, the difference between them
must be smaller than at least one of the tolerances.
-inf, inf and NaN behave similarly to the IEEE 754 Standard. That
is, NaN is not close to anything, even itself. inf and -inf are
only close to themselves.
[clinic start generated code]*/
static int
math_isclose_impl(PyObject *module, double a, double b, double rel_tol,
double abs_tol)
/*[clinic end generated code: output=b73070207511952d input=f28671871ea5bfba]*/
{
double diff = 0.0;
/* sanity check on the inputs */
if (rel_tol < 0.0 || abs_tol < 0.0 ) {
PyErr_SetString(PyExc_ValueError,
"tolerances must be non-negative");
return -1;
}
if ( a == b ) {
/* short circuit exact equality -- needed to catch two infinities of
the same sign. And perhaps speeds things up a bit sometimes.
*/
return 1;
}
/* This catches the case of two infinities of opposite sign, or
one infinity and one finite number. Two infinities of opposite
sign would otherwise have an infinite relative tolerance.
Two infinities of the same sign are caught by the equality check
above.
*/
if (Py_IS_INFINITY(a) || Py_IS_INFINITY(b)) {
return 0;
}
/* now do the regular computation
this is essentially the "weak" test from the Boost library
*/
diff = fabs(b - a);
return (((diff <= fabs(rel_tol * b)) ||
(diff <= fabs(rel_tol * a))) ||
(diff <= abs_tol));
}
static inline int
_check_long_mult_overflow(long a, long b) {
/* From Python2's int_mul code:
Integer overflow checking for * is painful: Python tried a couple ways, but
they didn't work on all platforms, or failed in endcases (a product of
-sys.maxint-1 has been a particular pain).
Here's another way:
The native long product x*y is either exactly right or *way* off, being
just the last n bits of the true product, where n is the number of bits
in a long (the delivered product is the true product plus i*2**n for
some integer i).
The native double product (double)x * (double)y is subject to three
rounding errors: on a sizeof(long)==8 box, each cast to double can lose
info, and even on a sizeof(long)==4 box, the multiplication can lose info.
But, unlike the native long product, it's not in *range* trouble: even
if sizeof(long)==32 (256-bit longs), the product easily fits in the
dynamic range of a double. So the leading 50 (or so) bits of the double
product are correct.
We check these two ways against each other, and declare victory if they're
approximately the same. Else, because the native long product is the only
one that can lose catastrophic amounts of information, it's the native long
product that must have overflowed.
*/
long longprod = (long)((unsigned long)a * b);
double doubleprod = (double)a * (double)b;
double doubled_longprod = (double)longprod;
if (doubled_longprod == doubleprod) {
return 0;
}
const double diff = doubled_longprod - doubleprod;
const double absdiff = diff >= 0.0 ? diff : -diff;
const double absprod = doubleprod >= 0.0 ? doubleprod : -doubleprod;
if (32.0 * absdiff <= absprod) {
return 0;
}
return 1;
}
/*[clinic input]
math.prod
iterable: object
/
*
start: object(c_default="NULL") = 1
Calculate the product of all the elements in the input iterable.
The default start value for the product is 1.
When the iterable is empty, return the start value. This function is
intended specifically for use with numeric values and may reject
non-numeric types.
[clinic start generated code]*/
static PyObject *
math_prod_impl(PyObject *module, PyObject *iterable, PyObject *start)
/*[clinic end generated code: output=36153bedac74a198 input=4c5ab0682782ed54]*/
{
PyObject *result = start;
PyObject *temp, *item, *iter;
iter = PyObject_GetIter(iterable);
if (iter == NULL) {
return NULL;
}
if (result == NULL) {
result = PyLong_FromLong(1);
if (result == NULL) {
Py_DECREF(iter);
return NULL;
}
} else {
Py_INCREF(result);
}
#ifndef SLOW_PROD
/* Fast paths for integers keeping temporary products in C.
* Assumes all inputs are the same type.
* If the assumption fails, default to use PyObjects instead.
*/
if (PyLong_CheckExact(result)) {
int overflow;
long i_result = PyLong_AsLongAndOverflow(result, &overflow);
/* If this already overflowed, don't even enter the loop. */
if (overflow == 0) {
Py_DECREF(result);
result = NULL;
}
/* Loop over all the items in the iterable until we finish, we overflow
* or we found a non integer element */
while(result == NULL) {
item = PyIter_Next(iter);
if (item == NULL) {
Py_DECREF(iter);
if (PyErr_Occurred()) {
return NULL;
}
return PyLong_FromLong(i_result);
}
if (PyLong_CheckExact(item)) {
long b = PyLong_AsLongAndOverflow(item, &overflow);
if (overflow == 0 && !_check_long_mult_overflow(i_result, b)) {
long x = i_result * b;
i_result = x;
Py_DECREF(item);
continue;
}
}
/* Either overflowed or is not an int.
* Restore real objects and process normally */
result = PyLong_FromLong(i_result);
if (result == NULL) {
Py_DECREF(item);
Py_DECREF(iter);
return NULL;
}
temp = PyNumber_Multiply(result, item);
Py_DECREF(result);
Py_DECREF(item);
result = temp;
if (result == NULL) {
Py_DECREF(iter);
return NULL;
}
}
}
/* Fast paths for floats keeping temporary products in C.
* Assumes all inputs are the same type.
* If the assumption fails, default to use PyObjects instead.
*/
if (PyFloat_CheckExact(result)) {
double f_result = PyFloat_AS_DOUBLE(result);
Py_DECREF(result);
result = NULL;
while(result == NULL) {
item = PyIter_Next(iter);
if (item == NULL) {
Py_DECREF(iter);
if (PyErr_Occurred()) {
return NULL;
}
return PyFloat_FromDouble(f_result);
}
if (PyFloat_CheckExact(item)) {
f_result *= PyFloat_AS_DOUBLE(item);
Py_DECREF(item);
continue;
}
if (PyLong_CheckExact(item)) {
long value;
int overflow;
value = PyLong_AsLongAndOverflow(item, &overflow);
if (!overflow) {
f_result *= (double)value;
Py_DECREF(item);
continue;
}
}
result = PyFloat_FromDouble(f_result);
if (result == NULL) {
Py_DECREF(item);
Py_DECREF(iter);
return NULL;
}
temp = PyNumber_Multiply(result, item);
Py_DECREF(result);
Py_DECREF(item);
result = temp;
if (result == NULL) {
Py_DECREF(iter);
return NULL;
}
}
}
#endif
/* Consume rest of the iterable (if any) that could not be handled
* by specialized functions above.*/
for(;;) {
item = PyIter_Next(iter);
if (item == NULL) {
/* error, or end-of-sequence */
if (PyErr_Occurred()) {
Py_DECREF(result);
result = NULL;
}
break;
}
temp = PyNumber_Multiply(result, item);
Py_DECREF(result);
Py_DECREF(item);
result = temp;
if (result == NULL)
break;
}
Py_DECREF(iter);
return result;
}
1996-12-09 18:32:36 -04:00
static PyMethodDef math_methods[] = {
{"acos", math_acos, METH_O, math_acos_doc},
{"acosh", math_acosh, METH_O, math_acosh_doc},
{"asin", math_asin, METH_O, math_asin_doc},
{"asinh", math_asinh, METH_O, math_asinh_doc},
{"atan", math_atan, METH_O, math_atan_doc},
{"atan2", (PyCFunction)(void(*)(void))math_atan2, METH_FASTCALL, math_atan2_doc},
{"atanh", math_atanh, METH_O, math_atanh_doc},
MATH_CEIL_METHODDEF
{"copysign", (PyCFunction)(void(*)(void))math_copysign, METH_FASTCALL, math_copysign_doc},
{"cos", math_cos, METH_O, math_cos_doc},
{"cosh", math_cosh, METH_O, math_cosh_doc},
MATH_DEGREES_METHODDEF
MATH_DIST_METHODDEF
{"erf", math_erf, METH_O, math_erf_doc},
{"erfc", math_erfc, METH_O, math_erfc_doc},
{"exp", math_exp, METH_O, math_exp_doc},
{"expm1", math_expm1, METH_O, math_expm1_doc},
{"fabs", math_fabs, METH_O, math_fabs_doc},
MATH_FACTORIAL_METHODDEF
MATH_FLOOR_METHODDEF
MATH_FMOD_METHODDEF
MATH_FREXP_METHODDEF
MATH_FSUM_METHODDEF
{"gamma", math_gamma, METH_O, math_gamma_doc},
MATH_GCD_METHODDEF
{"hypot", (PyCFunction)(void(*)(void))math_hypot, METH_FASTCALL, math_hypot_doc},
MATH_ISCLOSE_METHODDEF
MATH_ISFINITE_METHODDEF
MATH_ISINF_METHODDEF
MATH_ISNAN_METHODDEF
MATH_LDEXP_METHODDEF
{"lgamma", math_lgamma, METH_O, math_lgamma_doc},
MATH_LOG_METHODDEF
{"log1p", math_log1p, METH_O, math_log1p_doc},
MATH_LOG10_METHODDEF
MATH_LOG2_METHODDEF
MATH_MODF_METHODDEF
MATH_POW_METHODDEF
MATH_RADIANS_METHODDEF
{"remainder", (PyCFunction)(void(*)(void))math_remainder, METH_FASTCALL, math_remainder_doc},
{"sin", math_sin, METH_O, math_sin_doc},
{"sinh", math_sinh, METH_O, math_sinh_doc},
{"sqrt", math_sqrt, METH_O, math_sqrt_doc},
{"tan", math_tan, METH_O, math_tan_doc},
{"tanh", math_tanh, METH_O, math_tanh_doc},
MATH_TRUNC_METHODDEF
MATH_PROD_METHODDEF
{NULL, NULL} /* sentinel */
1990-10-14 09:07:46 -03:00
};
2002-06-13 17:33:02 -03:00
PyDoc_STRVAR(module_doc,
"This module is always available. It provides access to the\n"
2002-06-13 17:33:02 -03:00
"mathematical functions defined by the C standard.");
static struct PyModuleDef mathmodule = {
PyModuleDef_HEAD_INIT,
"math",
module_doc,
-1,
math_methods,
NULL,
NULL,
NULL,
NULL
};
PyMODINIT_FUNC
PyInit_math(void)
1990-10-14 09:07:46 -03:00
{
PyObject *m;
m = PyModule_Create(&mathmodule);
if (m == NULL)
goto finally;
1996-12-16 20:47:03 -04:00
PyModule_AddObject(m, "pi", PyFloat_FromDouble(Py_MATH_PI));
PyModule_AddObject(m, "e", PyFloat_FromDouble(Py_MATH_E));
PyModule_AddObject(m, "tau", PyFloat_FromDouble(Py_MATH_TAU)); /* 2pi */
PyModule_AddObject(m, "inf", PyFloat_FromDouble(m_inf()));
#if !defined(PY_NO_SHORT_FLOAT_REPR) || defined(Py_NAN)
PyModule_AddObject(m, "nan", PyFloat_FromDouble(m_nan()));
#endif
1996-12-16 20:47:03 -04:00
finally:
return m;
1990-10-14 09:07:46 -03:00
}