..
templates
drivers: Sagetech MXS transponder support
2022-06-20 18:16:07 -04:00
tools
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
CMakeLists.txt
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
action_request.msg
Use action_request to command RC VTOL transitions
2021-11-09 16:05:25 +01:00
actuator_armed.msg
…
actuator_controls.msg
use actuator_controls[8] for collective tilt for tiltrotor VTOL, instead of [4]
2022-05-03 15:11:21 +02:00
actuator_controls_status.msg
mc_rate: compute control energy and publish to status msg
2021-10-02 18:12:05 -04:00
actuator_motors.msg
esc_report: add actuator_function
2022-05-12 07:58:56 +02:00
actuator_outputs.msg
hitl,sitl,sih: use separate actuator_outputs_sim for SYS_CTRL_ALLOC==1
2022-02-25 08:30:58 +01:00
actuator_servos.msg
Whitespace cleanup.
2021-10-19 13:29:26 -04:00
actuator_servos_trim.msg
control_allocator: implement trim + slew rate limits configuration
2021-12-24 20:06:13 -05:00
actuator_test.msg
control_allocator: increase max num motors to 12
2022-05-10 08:57:39 +02:00
adc_report.msg
…
airspeed.msg
differential pressure remove filters from drivers and average in sensors/airspeed
2022-04-26 08:39:19 -04:00
airspeed_validated.msg
…
airspeed_wind.msg
AirspeedSelector: add _CAS_scale_validated to airspeed_wind for logging
2021-10-22 17:00:35 +02:00
autotune_attitude_control_status.msg
mc atune: add multicopter attitude auto-tuner module
2021-10-02 18:12:05 -04:00
battery_status.msg
msg: Add full_charge_capacity_wh
2022-01-26 13:44:48 -05:00
button_event.msg
safety and safety button: refactoring #19413
2022-04-05 07:57:37 +02:00
camera_capture.msg
…
camera_status.msg
…
camera_trigger.msg
Fix camera trigger via MAVLink when camera capture feedback is enabled
2021-12-17 07:56:08 +01:00
cellular_status.msg
…
collision_constraints.msg
…
collision_report.msg
…
commander_state.msg
Added VTOL Takeoff navigation mode ( #19027 )
2022-02-15 14:56:57 +01:00
control_allocator_status.msg
control_allocator: remove failed motor from effectiveness
2022-05-12 07:58:56 +02:00
cpuload.msg
…
debug_array.msg
…
debug_key_value.msg
…
debug_value.msg
…
debug_vect.msg
…
differential_pressure.msg
differential pressure remove filters from drivers and average in sensors/airspeed
2022-04-26 08:39:19 -04:00
distance_sensor.msg
…
ekf2_timestamps.msg
…
esc_report.msg
esc_report: add actuator_function
2022-05-12 07:58:56 +02:00
esc_status.msg
…
estimator_aid_source_1d.msg
ekf2: estimator aid source status (range height)
2022-05-25 09:25:12 -04:00
estimator_aid_source_2d.msg
ekf2: estimator aid source status (starting with fake position)
2022-05-23 16:21:49 -04:00
estimator_aid_source_3d.msg
ekf2: estimator aid source status (GPS pos, GPS vel)
2022-05-23 16:21:49 -04:00
estimator_baro_bias.msg
…
estimator_event_flags.msg
ekf2: estimator aid source status (GPS pos, GPS vel)
2022-05-23 16:21:49 -04:00
estimator_gps_status.msg
ekf2: add new estimator_gps_status.msg
2022-02-21 08:58:59 -05:00
estimator_innovations.msg
ekf: add logging of range finder consistency check
2022-04-13 11:41:48 +02:00
estimator_selector_status.msg
…
estimator_sensor_bias.msg
save significant IMU bias changes learned by the EKF
2021-11-07 15:34:27 -05:00
estimator_states.msg
…
estimator_status.msg
ekf: add range finder "faulty" status
2022-02-11 10:57:45 -05:00
estimator_status_flags.msg
ekf: add logging for rng kinematic consistency check
2022-04-13 11:41:48 +02:00
event.msg
…
failure_detector_status.msg
failure_detector: add motor/ESC failure detection
2022-05-12 07:58:56 +02:00
follow_target.msg
New follow-me flight task
2022-06-16 16:14:57 -04:00
follow_target_estimator.msg
New follow-me flight task
2022-06-16 16:14:57 -04:00
follow_target_status.msg
FollowMe : Replace First order target position filter with Second order position and velocity filter
2022-06-16 16:14:57 -04:00
generator_status.msg
…
geofence_result.msg
Format whitespace and group checkall() methods together in geofence class.
2022-01-31 21:01:03 -05:00
gimbal_device_attitude_status.msg
mavlink: don't send gimbal_device_attitude_status
2022-02-07 19:21:15 -05:00
gimbal_device_information.msg
…
gimbal_device_set_attitude.msg
…
gimbal_manager_information.msg
…
gimbal_manager_set_attitude.msg
…
gimbal_manager_set_manual_control.msg
…
gimbal_manager_status.msg
…
gps_dump.msg
…
gps_inject_data.msg
UAVCAN Moving Baseline Working
2021-11-30 15:59:08 -05:00
heater_status.msg
…
home_position.msg
…
hover_thrust_estimate.msg
…
input_rc.msg
px4io: moving mixing to FMU side
2021-09-25 19:15:05 -04:00
internal_combustion_engine_status.msg
…
iridiumsbd_status.msg
…
irlock_report.msg
…
landing_gear.msg
…
landing_target_innovations.msg
…
landing_target_pose.msg
…
led_control.msg
…
log_message.msg
…
logger_status.msg
…
mag_worker_data.msg
…
magnetometer_bias_estimate.msg
magnetometer allow setting initial calibration from bias if available and stable
2021-12-01 20:24:56 -05:00
manual_control_setpoint.msg
Use backwards compatible manual_control_setpoint instead of manual_control_input
2021-11-09 16:05:25 +01:00
manual_control_switches.msg
manual_control: enable sending camera commands
2022-01-10 23:04:10 -05:00
mavlink_log.msg
…
mavlink_tunnel.msg
Enable logging of mavlink tunnel messages
2022-01-26 11:10:43 -05:00
mission.msg
…
mission_result.msg
…
mount_orientation.msg
…
navigator_mission_item.msg
…
npfg_status.msg
integrate optional NPFG library for wind-aware fixed-wing guidance
2022-01-14 22:05:53 +01:00
obstacle_distance.msg
…
offboard_control_mode.msg
Enable offboard actuator setpoints
2021-11-07 15:38:42 -05:00
onboard_computer_status.msg
…
orb_test.msg
…
orb_test_large.msg
…
orb_test_medium.msg
…
orbit_status.msg
…
parameter_update.msg
…
ping.msg
…
position_controller_landing_status.msg
…
position_controller_status.msg
…
position_setpoint.msg
…
position_setpoint_triplet.msg
…
power_button_state.msg
…
power_monitor.msg
…
pps_capture.msg
Fix PPS based UTC timestamp in camera trigger and capture messages
2021-12-17 07:56:08 +01:00
pwm_input.msg
…
px4io_status.msg
px4io: replace safety_off state with safety button event ( #19558 )
2022-06-01 13:15:13 -04:00
radio_status.msg
…
rate_ctrl_status.msg
…
rc_channels.msg
px4io: moving mixing to FMU side
2021-09-25 19:15:05 -04:00
rc_parameter_map.msg
…
rpm.msg
…
rtl_time_estimate.msg
Compute RTL time and react if lower than flight time
2021-11-24 14:10:24 +01:00
satellite_info.msg
…
sensor_accel.msg
…
sensor_accel_fifo.msg
…
sensor_baro.msg
sensors: add baro calibration and cleanup
2022-03-26 16:08:41 -04:00
sensor_combined.msg
Add gyro clipping to mirror accel clipping monitoring instances.
2022-05-18 21:16:05 -04:00
sensor_correction.msg
…
sensor_gnss_relative.msg
drives/gps: add new sensor_gnsss_relative msg
2022-03-29 07:59:41 +02:00
sensor_gps.msg
UAVCAN Moving Baseline Working
2021-11-30 15:59:08 -05:00
sensor_gyro.msg
Add gyro clipping to mirror accel clipping monitoring instances.
2022-05-18 21:16:05 -04:00
sensor_gyro_fft.msg
…
sensor_gyro_fifo.msg
…
sensor_hygrometer.msg
msg: new sensor_hygrometer msg
2021-12-27 12:13:09 -05:00
sensor_mag.msg
sensors (accel/gyro/mag) determine if external with device id
2022-01-10 10:31:07 -05:00
sensor_optical_flow.msg
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
sensor_preflight_mag.msg
…
sensor_selection.msg
…
sensors_status.msg
sensors: add baro calibration and cleanup
2022-03-26 16:08:41 -04:00
sensors_status_imu.msg
…
system_power.msg
…
takeoff_status.msg
…
task_stack_info.msg
…
tecs_status.msg
…
telemetry_status.msg
mavlink increase HEARTBEAT timeout 1.5->2.5s
2022-02-18 10:16:20 -05:00
test_motor.msg
…
timesync.msg
…
timesync_status.msg
…
trajectory_bezier.msg
…
trajectory_setpoint.msg
trajectory_setpoint: correct comment typo "kinematically"
2022-05-12 17:19:48 +02:00
trajectory_waypoint.msg
…
transponder_report.msg
…
tune_control.msg
Reduce Beeepr Default volume : 40 -> 20, since it's too loud for TAP_ESC devices from Yuneec ( #19311 )
2022-03-11 10:27:57 +01:00
uavcan_parameter_request.msg
…
uavcan_parameter_value.msg
…
ulog_stream.msg
…
ulog_stream_ack.msg
…
uwb_distance.msg
Support for NXP UWB position sensor
2022-04-04 17:26:52 +02:00
uwb_grid.msg
Support for NXP UWB position sensor
2022-04-04 17:26:52 +02:00
vehicle_acceleration.msg
…
vehicle_air_data.msg
sensors: add baro calibration and cleanup
2022-03-26 16:08:41 -04:00
vehicle_angular_acceleration.msg
…
vehicle_angular_acceleration_setpoint.msg
…
vehicle_angular_velocity.msg
…
vehicle_attitude.msg
Add gyro clipping to mirror accel clipping monitoring instances.
2022-05-18 21:16:05 -04:00
vehicle_attitude_setpoint.msg
use actuator_controls[8] for collective tilt for tiltrotor VTOL, instead of [4]
2022-05-03 15:11:21 +02:00
vehicle_command.msg
vehicle_command.msg: unneeded comment closings removed ( #19759 )
2022-06-03 07:25:05 +02:00
vehicle_command_ack.msg
…
vehicle_constraints.msg
vehicle_constraints: remove deprecated speed_xy constraint
2021-11-09 21:47:06 -05:00
vehicle_control_mode.msg
px4io: moving mixing to FMU side
2021-09-25 19:15:05 -04:00
vehicle_global_position.msg
…
vehicle_gps_position.msg
…
vehicle_imu.msg
Add gyro clipping to mirror accel clipping monitoring instances.
2022-05-18 21:16:05 -04:00
vehicle_imu_status.msg
Add gyro clipping to mirror accel clipping monitoring instances.
2022-05-18 21:16:05 -04:00
vehicle_land_detected.msg
move vehicle at rest detection ekf2 -> land_detector
2022-02-01 17:50:19 -05:00
vehicle_local_position.msg
small typo in vehicle_local_position msg
2021-12-17 15:45:07 +01:00
vehicle_local_position_setpoint.msg
vehicle_local_position_setpoint: reorder fields for clarity
2022-05-12 17:19:48 +02:00
vehicle_magnetometer.msg
…
vehicle_odometry.msg
add odometry reset counter (ekf2, mavlink, etc)
2022-01-31 09:19:36 -05:00
vehicle_optical_flow.msg
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
vehicle_optical_flow_vel.msg
optical flow sensor pipeline overhaul
2022-06-20 20:56:56 -04:00
vehicle_rates_setpoint.msg
…
vehicle_roi.msg
…
vehicle_status.msg
Style refactoring related to safety button
2022-06-08 05:12:05 -04:00
vehicle_status_flags.msg
Commander: remove system_sensors_initialized
2022-06-15 14:02:00 -04:00
vehicle_thrust_setpoint.msg
vehicle_{thrust,torque}_setpoint.msg: fix comment
2022-04-28 19:51:28 -04:00
vehicle_torque_setpoint.msg
vehicle_{thrust,torque}_setpoint.msg: fix comment
2022-04-28 19:51:28 -04:00
vehicle_trajectory_bezier.msg
…
vehicle_trajectory_waypoint.msg
…
vtol_vehicle_status.msg
VTOL: remove some unsued variables
2022-05-18 10:01:04 +02:00
wheel_encoders.msg
…
wind.msg
…
yaw_estimator_status.msg
ekf2: yaw estimator add yaw_composite_valid boolean
2022-06-01 13:16:06 -04:00
