David Sidrane
62fd132047
boards:Use inttypes
...
nxp_ucans32k146:Fix constant
spracing_h7extreme:Use inttypes
2021-06-16 17:07:47 +02:00
echoG
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
2021-06-09 12:17:45 -04:00
Daniel Agar
5f775b508f
boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7
2021-06-01 15:19:15 -04:00
David Sidrane
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
Daniel Agar
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
2021-05-17 20:26:25 -04:00
David Sidrane
923af2c65b
spracing_h7extreme: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
Daniel Agar
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
3d667b1675
delete unused drivers/lights/blinkm
2021-03-28 19:21:29 -04:00
Daniel Agar
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
David Sidrane
0d4f48a8d2
spracing h7extreme:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Daniel Agar
2360c50713
boards: spracing/h7extreme remove temperature_compensation and differential_pressure sensors to save flash
2021-03-18 19:34:51 -04:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Beat Küng
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
2021-02-25 09:28:37 -05:00
Daniel Agar
11ad41f7cb
delete old imu/mpu6000 driver
2021-02-23 15:58:36 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer
2021-02-17 11:25:56 -05:00
Daniel Agar
44df0fb7a2
Analog Devices ADIS16448 rewrite
...
- new IMU driver structure with state machine (no sleeps in bus thread)
- verify all configured registers and trigger reset on failure
- detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
- don't use CRC-16 on burst transfers except for verified lots
2021-02-16 10:29:07 +01:00
Daniel Agar
fb2a199621
delete unmaintaned mkblctrl driver
2021-02-14 10:38:15 +01:00
Daniel Agar
a257120e8d
boards: use new param default mechanism
2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
Matthias Grob
7545249215
Add flight_mode_manager to all targets with mc_pos_control
2020-12-30 10:25:08 -05:00
David Sidrane
22bc176885
Added mft for queries
2020-12-02 20:40:23 -05:00
David Sidrane
94825ddc6e
spracing_h7extreme: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
Igor Mišić
ea3d202370
spracing_h7extrem: Updated gyros to use icm20602 drivers.
2020-10-24 11:54:13 -04:00
David Sidrane
240dfaa515
spracing_h7extreme: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
d437379142
spracing_h7extreme:qspi Fix style issues
2020-09-16 21:32:04 -04:00
David Sidrane
f9adf861dc
spracing_h7extreme Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
SalimTerryLi
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
CUAVcaijie
536877cf0a
boards: add UAVCAN timer override mechanism and CUAV X7 add CAN ( #15348 )
...
* X7Pro adds CAN driver
* UAVCAN timer selection moved to default.cmake
* Modify some details about @CUAVcaijie UAVCAN timer selection moved to default.cmake
* Put some timer parameters to micro_hal.h from board_config.h. Fix all h7 boards
Co-authored-by: honglang <honglang@cuav.net>
2020-08-28 12:16:48 -04:00
Daniel Agar
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
Igor Mišić
f5283e0da1
spracing_h7extreme: OSD enabled with added internal SPI bus flag
2020-08-04 19:07:15 -04:00
Daniel Agar
a93052f9b2
boards/spracing/h7extreme: delete unused stackcheck build
2020-08-03 15:56:33 -04:00
Igor Mišić
7eaa48e36f
New board: SP Racing H7 Extreme
...
Authored-by: igor.misic <igor.misic@rimac@automobili.hr>
2020-08-03 15:32:58 -04:00