Commit Graph

199 Commits

Author SHA1 Message Date
Justin 88bf1030b5 Update CI to use the main branches. 2022-09-07 20:03:19 -04:00
David Sidrane 9d0e57230a
boards: new px4_fmu-v6c board support (#19544) 2022-05-20 15:49:06 -04:00
Daniel Agar 371a551f05
github actions: add all matek targets and sort 2022-05-10 11:33:01 -04:00
achim adacdad32d
boards: add new Diatone Mamba F405 mk2 2022-04-25 21:53:58 -04:00
Kirill Shilov 6981a70859
boards: new Sky-Drones AIRLink board support 2022-04-24 13:57:42 -04:00
Julian Oes 37fa4bccb6 mavsdk_tests: update MAVSDK dependency
This should fix the CI issue where the test just hangs trying to
connect.
2022-04-20 11:48:53 -04:00
alexklimaj 4fc161192a Add ARK CANnode board config 2022-04-12 21:23:18 -04:00
dirksavage88 d92244b664 Initial Matek m9nf4 can node support
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Added uavcan board identity

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Added usb.c, LED rework may be needed

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

PX4 dates added to all files

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Matek M9NF4 CAN Node initial board support

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Changed GPS to ttyS3 in board sensors, led board on/off definitions

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Added app descriptor section to canbootloader linker script

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Changed board naming convention to match vendor

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Changed canbootloader and nsh menuconfig

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Test defconfig changes, IRQ hardfault in bootloader

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

Working canbootloader, App firmware stil WIP

Working App firmware: changed romfsroot to 'cannode', TODO: verify GPS & IMU config

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>

TODO: Debug GPS no sats/low sats issue, no magnetometer on some boards

Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
2022-02-01 21:49:29 -05:00
Beat Küng 425b268feb boards: add holybro/kakuteh7
known issues:
- flash-based params does not work on H7 (due to ECC), so params are on
  SD card. The last flash sector is still reserved however.
- output channel 6 does not support DShot (the implementation does not
  handle channel gaps)
- flashing of the 2. flash bank is much slower (around 3x), than the 1.
  bank for some unknown reason.
- after the BL jumps to the app, there's several seconds passing until
  stm32_boardinitialize() is called.
2022-01-17 10:41:33 -05:00
Julian Oes be0a5b4b32 workflows: Set up batch fuzzing every 24 hours
So instead of fuzzing each and every PR for 10minutes, we just fuzz
30mins every 24 hours, at 6am UTC which should be a time when US and
Europe might be least active.
2022-01-07 10:17:12 -05:00
Julian Oes 2cbc993976 Add clusterfuzzlite to fuzz in CI 2022-01-07 10:17:12 -05:00
alessandro 2c8a92c628 sitl config: put model name first
Github constructs the workflow names from the 
matrix configurations. Having latitude and longitude
in the fist columns makes these names rather cryptic.
2021-12-22 12:48:54 +01:00
Julian Oes accbdbf129 DEBUG: get some mavsdk_test_runner.py output 2021-12-02 11:40:26 -05:00
Beat Küng b94c5db55d component_information: add actuators json generation & CI deployment 2021-11-23 12:40:22 -05:00
Daniel Agar 66ab7e50df
github actions increase NuttX compile ccache limit slightly 2021-11-07 20:37:58 -05:00
Viktor Vladic 5b3e1a2347
boards: add MatekH743-slim support 2021-11-07 15:39:50 -05:00
Vatsal Asitkumar Joshi ea1ae73526
Support for Raspberry PI RP2040 MCU (#18083) 2021-11-03 12:14:30 -04:00
Beat Küng 0decdb1c7b github action: run ./Tools/generate_board_targets_json.py in container
As it requires kconfiglib
2021-10-27 15:23:23 +02:00
Beat Küng cc1d24a5fe ci compile_nuttx: disable fail-fast
So that all failures can be evaluated.
2021-10-18 18:45:19 -04:00
Daniel Agar 435e5515df github actions: increase nuttx and linux ccache max size to 100M 2021-10-14 19:45:29 -04:00
Daniel Agar 7e71b7eafc github actions: compile nuttx archive bin files and remove duplicate nuttx cannode builds 2021-10-14 19:45:29 -04:00
Daniel Agar e8a064af02
github actions: try increasing nuttx ccache limit 2021-10-14 11:54:19 -04:00
Daniel Agar dc9e072e83
github actions ccache set hash_dir=false 2021-10-06 17:55:50 -04:00
Daniel Agar 3e6ff2451b
github actions increase newly added timeouts 2021-10-06 13:47:12 -04:00
Daniel Agar 6e057a644b github actions remove ccache from deploy metadata and low priority builds
- this is an attempt to preserve our limited amount of github actions
cache storage
2021-10-06 13:46:20 -04:00
Daniel Agar 113ea5ea26 github actions add timeout to all_variants nuttx compile job 2021-10-06 09:28:27 -04:00
Daniel Agar 6edb1fa1f8 github actions add timeout to SITL tests run 2021-10-06 09:28:27 -04:00
Daniel Agar ad27d2c49a github actions enable ccache hash_dir for SITL tests 2021-10-06 09:28:27 -04:00
Daniel Agar 52fccb1e75 github actions decrease ccache max_size selectively 2021-10-06 09:28:27 -04:00
Daniel Agar d002002ceb github actions increase ccache compression level 2021-10-06 09:28:27 -04:00
Daniel Agar 51758bd7e6
boards: delete unused variants 2021-10-05 23:14:04 -04:00
alexklimaj 05ee31072a Add ARK RTK GPS 2021-10-01 20:34:32 -04:00
Jukka Laitinen ffa5abbd65 ci: update container versions to 2021-09-08
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-09-09 09:43:15 +02:00
Daniel Agar 7b8ef07235 github actions: add all CAN nodes 2021-08-18 12:17:46 -04:00
Daniel Agar a76bcd3e01 CI fix renamed uorb_to_ros_rtps_ids.py -> uorb_to_ros_urtps_topics.py 2021-08-14 15:53:14 -04:00
Daniel Agar e900f2ea54 boards: Advanced Technology Labs (ATL) Mantis EDU support and airfarme (SYS_AUTOSTART 4061)
Co-authored-by: Julian Oes <julian@oes.ch>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-08-04 17:15:24 -04:00
Daniel Agar 12ad7b17ce Makefile: add all_variants_@ helper target and consolidate github actions builds 2021-07-15 21:09:50 -04:00
Daniel Agar 2cf66a5d8f ekf2: move EKF out of ecl 2021-07-15 10:38:24 -04:00
Daniel Agar 18dcec43d3
github actions: add standalone ecl builds and testing 2021-07-13 19:01:19 -04:00
Beat Küng 5a370bf575
CI: update remaining container to 2021-05-04 2021-07-09 10:51:47 +02:00
Beat Küng 6938b1710a fix github deploy_all.yml: explicitly call events_json
Some targets don't build it (e.g. ark can bootloader)
2021-07-08 16:29:37 -04:00
Daniel Agar bcfed93c57
github actions: fix airframe_metadata 2021-07-08 13:11:53 -04:00
Beat Küng b12b884f4c ci: update container version to 2021-05-04 2021-07-07 21:38:09 -04:00
Beat Küng 6d26cabdbb github ci: deploy airframes metadata to s3 2021-07-07 21:38:09 -04:00
Beat Küng e1852a7a9a github ci: deploy events metadata 2021-07-07 21:38:09 -04:00
TSC21 9fb53d4276 microRTPS: add option to build the microRTPS agent after its generation 2021-06-21 16:36:44 +02:00
Julian Oes 8be1034346
workflows: fixes typo on python package name (#17740)
The previous PR was merged optimistically.
2021-06-09 09:11:28 -07:00
Julian Oes 17ea92bb54
workflows: add missing dependency for mypy (#17736) 2021-06-09 08:52:21 -07:00
Daniel Agar d31a45a62d github actions SITL test run standard_vtol with address sanitizer 2021-06-04 13:27:42 -04:00
modaltb e25cfaaa2f
boards: Add ModalAI Flight Core v2 initial support 2021-05-28 22:26:40 -04:00