e457a5baed
Differential Drive Guidance: Add guidance
...
also add dependency on control allocation parameter CA_R_REV
Differential Drive Guidance: Added mission logic
Differential Drive Guidance
Differential Drive Guidance
Differential Guidance: Inlcude library
Differential Guidance: Compiles, does not work though
Differential Guidance: Works somewhat
Differential Guidance: Temp
Differential Guidance: Tuning
Differeital Drive Guidance: Remove waypoint mover
Differential Guidance: Fixed accuracy issue by converting from float to double
Differential Guidance: rebased on differentialdrive and improved waypoint accuracy
Temp
Differential Guidance: cleanup
temp
2024-02-12 14:29:10 +01:00
0f3925b21d
update all px4board kconfig
2024-02-09 10:48:26 -05:00
f636414ca7
tuning_tools: Change 1G to a more accurate value
2024-02-09 10:26:57 -05:00
00a9e4c76b
Auto: Change 1G to a more accurate value
2024-02-09 10:26:57 -05:00
31bbda0b58
boards: new ARK Septentrio GPS CAN node(ark_septentrio-gps)
...
* update gps submodule with sbf fix
* ARK Septentrio GPS initial commit
2024-02-09 10:26:09 -05:00
b355c16141
Lanbao driver: correct rangefinder type to IR
2024-02-09 06:19:12 +01:00
7fdb5ef3cb
PWMOut/px4io: correct automatic servo/motor configuration messages
2024-02-09 06:19:12 +01:00
3de7d83e5f
v6x board_sensors: publish system_power if ADC_ADS1115_EN is enabled
2024-02-08 16:11:34 +01:00
97cb933cff
FLightTaskAuto: limit nudging speed based on distance sensor
2024-02-07 11:23:55 +01:00
584d8abe1e
params: change return type of param_modify_on_import to enum
...
Return early in param_import_callback() with 1 if we do a param_set in the param translation.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-02-07 08:08:37 +01:00
982c998ab9
mc_attitude_control: move attitude setpoint pulling to right before usage
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-02-06 17:54:22 -05:00
e5cfbbb1ee
mc_att_control: remove direct setting of att sp in Stabilized
...
Instead of directly setting the attitude setpoint for usage inside the same module
only publish it to the uorb topic, which is subscribed to in the same module.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-02-06 17:54:22 -05:00
3576d513cd
battery: make time remaining estimation dependent on level flight cha… ( #22401 )
...
* battery: make time remaining estimation dependent on level flight characteristis for FW
* battery: fix that FW flight is also correctly detected when vehicle_status is not updated
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* FixedwingPositionControl: Move constant to header file
* flight phase estimation: use tecs height rate reference to check for level flight
---------
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2024-02-06 17:32:09 +01:00
bf52d8adc9
drivers/uavcannode: add indicated airspeed
...
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
2024-02-06 11:01:15 -05:00
a6fcb8ef1e
bat_sim: parameter for disabling battery simulator
2024-02-06 10:21:21 -05:00
1917c138f7
Bugfix removed conversion from rpm to rad s
2024-02-06 13:25:25 +01:00
17d55dddd6
ekf2-drag: do not generate Kalman gain to save flash
2024-02-06 12:16:33 +01:00
1efb08375a
ekf2: let drag fusion affect the complete state vector
...
This improves tilt estimation and can extend the inertial dead-reckoning
validity period
2024-02-06 12:16:33 +01:00
8dae9905aa
fmu-v6xrt: hotfix for sdio crash when reading multiblock to unaligned memory
2024-02-05 11:17:33 -05:00
c78389a855
commander: send ack for VEHICLE_CMD_DO_SET_ACTUATOR
2024-02-02 09:38:28 -05:00
8b422c5ed6
fix FunctionActuatorSet: if a param is set to NaN, it should be ignored
...
MAVLink spec: https://mavlink.io/en/messages/common.html#MAV_CMD_DO_SET_ACTUATOR
Previously, a command was overwriting all other indexes.
2024-02-02 09:38:28 -05:00
75d6e523b5
ICP201: Fix B2 version not return in bootup config
2024-02-02 09:37:18 -05:00
6dbb798e37
Change FMU-v6x REV 6 IMU Order
...
Change IMU Order, make adis16470 in 1st priority.
2024-02-02 05:49:21 -05:00
c07edd1d9a
px4_fmu-v6x:Add Sensor set 8
2024-02-01 21:11:32 -05:00
2cfdea2edb
fmu-6x: fix Telem2 without flow control
...
When flow control is used together with DMA, we need to add a pulldown
to CTS. Without it, it assumes flow control and gets stuck when
CTS is not connected.
Signed-off-by: Julian Oes <julian@oes.ch>
2024-02-02 06:52:17 +13:00
103ddb5b3d
cpuload: Fix wrong idle thread load
...
When the CPU load monitor is started while already running, then the
idle thread last_times[0] is reset to the last 1 second, rather than
since when the CPU load monitor was last started. The remaining threads
are not impacted, since their last_times[i] is reset to zero here.
This results in the idle thread having a lower than real CPU load, with
the remaining CPU time being wrongly attributed as scheduler load.
2024-01-31 07:52:59 +01:00
76a2acb222
stm32h7:adc Dynamically set clock prescaler & BOOST
...
The ADC peripheral can only support up to
50MHz on rev V silicon and 36MHz on Y silicon.
The existing driver always used no prescaler
and kept boost setting at 0.
2024-01-30 18:07:57 -05:00
543454f12e
stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC
2024-01-30 18:07:57 -05:00
85bfba4497
NuttX with h7 adc clock Backports
2024-01-30 18:07:57 -05:00
3e183feb49
matrix: Slice templated on const and non-const matrix cases
...
to avoid casting const to non-const with
`const_cast<Matrix<Type, M, N>*>(data)`
2024-01-30 11:46:33 -05:00
88102d82db
matrix: return value simplifications
2024-01-30 11:46:33 -05:00
44a8c553fb
AxisAngle use Vector3<T> instead of Vector<T, 3>
2024-01-30 11:46:33 -05:00
ea4fdfd637
matrix: fix internal include chain
2024-01-30 11:46:33 -05:00
c5757e0799
gimbal: Change the IF statement to a SWITCH statement
2024-01-30 11:28:20 -05:00
380841563f
ina238: set shunt calibration to desired value if readback is incorrect ( #22237 )
...
* refactor driver to dynamically check registers and do reset if register does not match desired value
* have seen various times where shunt calibration was reset in air
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com>
2024-01-30 11:28:05 -05:00
169d2dd286
mission_base: fix validity on abort landing
2024-01-30 11:25:37 -05:00
0a153efb9d
mission_base: make sure to always update state on mission topic update
2024-01-30 11:25:37 -05:00
97ce599b1f
mavlink_mission: publish mission topic at startup
2024-01-30 11:25:37 -05:00
9fd137e88e
mavlink_mission: add alternating storage for geofence and safe points on upload
...
This way the old points are kept on an upload error.
2024-01-30 11:25:37 -05:00
50f1abaef1
dataman: extend for double storage geofence and safe points
2024-01-30 11:25:37 -05:00
dfa56d474a
mission: renaming dataman_id to mission_dataman_id
2024-01-30 11:25:37 -05:00
cac858cb24
dataman: use correct size for dataman compat key
2024-01-30 11:25:37 -05:00
9c02e384e6
ekf2-agp: follow measurement reset
2024-01-30 11:23:55 -05:00
5d9081b0dd
ekf2-agp: ensure logging of AGP aid_src topic
2024-01-30 11:23:55 -05:00
4268759d4a
ekf2-agp: reset to measurement on fusion timeout
2024-01-30 11:23:55 -05:00
23ae769e46
check: Changing the order of messages and events
2024-01-30 11:20:19 -05:00
3c444c2f2a
dataman: Move before using variable definitions
2024-01-30 11:19:29 -05:00
d2a3ca28e1
boards: arkv6x migrate to split versioning
2024-01-30 11:15:03 -05:00
dc73d5d634
px4_fmu-v5x:Use BOARD_HAS_HW_SPLIT_VERSIONING & common PAB manifest
2024-01-30 11:15:03 -05:00
4b8b30914a
px4_fmu-v6xrt:Use BOARD_HAS_HW_SPLIT_VERSIONING & common PAB manifest
2024-01-30 11:15:03 -05:00
PerFrivik
PX4 BuildBot
muramura
Alex Klimaj
Matthias Grob
fury1895
Silvan Fuhrer
KonradRudin
Andrew Brahim
Alessandro Simovic
bresch
Peter van der Perk
Beat Küng
cuav-liu1
Vincent Poon
David Sidrane
Julian Oes
Niklas Hauser
Roman Bapst
Konrad