* events: pass relative paths plus base path to source parser script
to work around maximum Makefile command lenght limits.
* events: correct cmake comment typo
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
---------
Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Events have a global, system-wide sequence number, which must be handled
atomically, (fetching and incrementing the sequence AND sending the event
to uORB must be atomic). Currently in FLAT mode, only one instance of this
sequence number exists, so it is OK to have it in px4_platform.
However, in PROTECTED mode px4_platform is instantiated both in kernel-
and user spaces, which makes two instances of this sequence number, which
causes problems in the mavlink event handling logic.
When mavlink receives and handles events, it expects that:
- The sequence numbers arrive in order (seq n is followed by n+1 etc)
- It increments by 1
- There is only one instance of the sequence number
In PROTECTED mode this is violated, as the kernel and user sequence
numbers run freely on their own. This patch fixes the issue by moving
the event backend to the kernel and by providing user access to it via
ioctl.
- new ROS2 platform in PX4 intended for creating configs that build and run entirely in ROS2
- PX4_CONFIG defaults to px4_ros2_default if no config specified and in a colcon workspace with ROS_VERSION=2
- currently doesn't do much other than allow you to build px4 msgs interface package
Implement an interface for protected build to access parameters.
The implementation only does IOCTL calls to the kernel, where the parameters
live.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Define __KERNEL__ macro during compilation and place the module in separate library
Remove default library linking to m or libc on NuttX. Add these in platform layer instead, since
they are different on kernel and user side
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
- sending protocol
- uorb event message & template methods for argument packing
- libevents submodule to send common events and handle json files
- cmake maintains a list of all (PX4) source files for the current build
(PX4 modules + libs), which is used to extract event metadata and
generate a json file
When not building for testing, test_mixer_multirotor is not available
and causes a waraning with cmake 3.17:
This project specifies custom command DEPENDS on files in the build tree
that are not specified as the OUTPUT or BYPRODUCTS of any
add_custom_command or add_custom_target:
test_mixer_multirotor
The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
Script to update include paths:
for i in $(grep -rl 'include <px4_work_queue' src platforms); do sed -i 's/#include <px4_work_queue/#include <px4_platform_common\/px4_work_queue/' $i; done
CMAKE_TESTING should automatically be enabled
but I hoped to do that in the test.cmake
target specific options and not in the main
CMakeLists. I have to see if I can make that
order work. Here the hotfix to make CI work
again.
Matthias Grob
Ville Juven
Daniel Agar
Beat Küng
Peter van der Perk
Jukka Laitinen
Julian Oes
TSC21
Lorenz Meier