dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity

FMUv5: Add a build target for crypto interface testing, px4_fmu-v5_cryptotest 

To avoid messing with existing targets, and to automatically set the test keys
for the keystore.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This commit is contained in:
Jukka Laitinen 2021-07-21 10:17:05 +03:00 committed by Beat Küng
parent ce76380051
commit 1687cab56c
2 changed files with 394 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

150
boards/px4/fmu-v5/cryptotest.cmake Normal file
View File

@ -0,0 +1,150 @@
px4_add_board(
PLATFORM nuttx
TOOLCHAIN arm-none-eabi
ARCHITECTURE cortex-m7
ROMFSROOT px4fmu_common
IO px4_io-v2_default
UAVCAN_INTERFACES 2
UAVCAN_TIMER_OVERRIDE 6
CRYPTO sw_crypto
KEYSTORE stub_keystore
SERIAL_PORTS
GPS1:/dev/ttyS0
TEL1:/dev/ttyS1
TEL2:/dev/ttyS2
TEL4:/dev/ttyS3
DRIVERS
adc/ads1115
adc/board_adc
barometer # all available barometer drivers
batt_smbus
camera_capture
camera_trigger
differential_pressure # all available differential pressure drivers
distance_sensor # all available distance sensor drivers
dshot
gps
heater
#imu # all available imu drivers
imu/analog_devices/adis16448
imu/bosch/bmi055
imu/invensense/icm20602
imu/invensense/icm20689
imu/invensense/icm20948 # required for ak09916 mag
irlock
lights # all available light drivers
lights/rgbled_pwm
magnetometer # all available magnetometer drivers
optical_flow # all available optical flow drivers
osd
pca9685
pca9685_pwm_out
power_monitor/ina226
#protocol_splitter
pwm_input
pwm_out_sim
pwm_out
px4io
rc_input
roboclaw
smart_battery/batmon
rpm
safety_button
telemetry # all available telemetry drivers
tone_alarm
uavcan
MODULES
airspeed_selector
attitude_estimator_q
battery_status
camera_feedback
commander
dataman
ekf2
esc_battery
events
flight_mode_manager
fw_att_control
fw_pos_control_l1
gyro_calibration
gyro_fft
land_detector
landing_target_estimator
load_mon
local_position_estimator
logger
mavlink
mc_att_control
mc_hover_thrust_estimator
mc_pos_control
mc_rate_control
#micrortps_bridge
navigator
rc_update
rover_pos_control
sensors
sih
temperature_compensation
uuv_att_control
uuv_pos_control
vmount
vtol_att_control
SYSTEMCMDS
bl_update
dmesg
dumpfile
esc_calib
gpio
hardfault_log
i2cdetect
led_control
mft
mixer
motor_ramp
motor_test
mtd
nshterm
param
perf
pwm
reboot
reflect
sd_bench
serial_test
system_time
top
topic_listener
tune_control
uorb
usb_connected
ver
work_queue
EXAMPLES
fake_gps
#fake_imu
#fake_magnetometer
#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
#hello
#hwtest # Hardware test
#matlab_csv_serial
#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
#rover_steering_control # Rover example app
#uuv_example_app
#work_item
)
# For testing crypto with the stub_keystore, set keys to the PX4 test keys,
# for any real target using that keystore, these would probably be set as environment
# variables in the build environment
# Key 0: The firmware signature check key (public key), used by bootloaders
# NOTE: for FMUv5 this is not really used, it is only for NuttX based bootloaders
set(ENV{PUBLIC_KEY0} "${CMAKE_SOURCE_DIR}/Tools/test_keys/key0.pub")
# Key 1: An RSA2048 public key, used currently for logfile symmetric key exchange
set(ENV{PUBLIC_KEY1} "${CMAKE_SOURCE_DIR}/Tools/test_keys/rsa2048.pub")
# FW Signing tool, using ed25519 (this uses by default the key in Tools/test_keys/test_keys.json)
set(ENV{SIGNING_TOOL} "${CMAKE_SOURCE_DIR}/Tools/cryptotools.py")

244
boards/px4/fmu-v5/nuttx-config/cryptotest/defconfig Normal file
View File

@ -0,0 +1,244 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_ENVIRON is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_MMCSD_SPI is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_TIME is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32f7"
CONFIG_ARCH_CHIP_STM32F765II=y
CONFIG_ARCH_CHIP_STM32F7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_CRASHDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=22114
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_C99_BOOL8=y
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0x0032
CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v5.x"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x26ac
CONFIG_CDCACM_VENDORSTR="3D Robotics"
CONFIG_CLOCK_MONOTONIC=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_RANDOM_POOL=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_DISABLE_MQUEUE=y
CONFIG_FAT_DMAMEMORY=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_LFN_ALIAS_HASH=y
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
CONFIG_FS_PROCFS_MAX_TASKS=64
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MMCSD=y
CONFIG_MMCSD_SDIO=y
CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
CONFIG_MM_REGIONS=3
CONFIG_MTD=y
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_RAMTRON=y
CONFIG_NAME_MAX=40
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARCHROMFS=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_DISABLE_IFCONFIG=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_DISABLE_TELNETD=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=15
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_OTG_ID_GPIO_DISABLE=y
CONFIG_PIPES=y
CONFIG_PREALLOC_TIMERS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAMTRON_SETSPEED=y
CONFIG_RAMTRON_WRITEWAIT=y
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1632
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_SDMMC1_SDIO_MODE=y
CONFIG_SDMMC1_SDIO_PULLUP=y
CONFIG_SEM_NNESTPRIO=8
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_STM32F7_ADC1=y
CONFIG_STM32F7_BBSRAM=y
CONFIG_STM32F7_BBSRAM_FILES=5
CONFIG_STM32F7_BKPSRAM=y
CONFIG_STM32F7_DMA1=y
CONFIG_STM32F7_DMA2=y
CONFIG_STM32F7_DMACAPABLE=y
CONFIG_STM32F7_FLOWCONTROL_BROKEN=y
CONFIG_STM32F7_I2C1=y
CONFIG_STM32F7_I2C2=y
CONFIG_STM32F7_I2C3=y
CONFIG_STM32F7_I2C4=y
CONFIG_STM32F7_I2C_DYNTIMEO=y
CONFIG_STM32F7_I2C_DYNTIMEO_STARTSTOP=10
CONFIG_STM32F7_OTGFS=y
CONFIG_STM32F7_PROGMEM=y
CONFIG_STM32F7_PWR=y
CONFIG_STM32F7_RTC=y
CONFIG_STM32F7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
CONFIG_STM32F7_RTC_MAGIC_REG=1
CONFIG_STM32F7_SAVE_CRASHDUMP=y
CONFIG_STM32F7_SDMMC1=y
CONFIG_STM32F7_SDMMC_DMA=y
CONFIG_STM32F7_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32F7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32F7_SPI1=y
CONFIG_STM32F7_SPI1_DMA=y
CONFIG_STM32F7_SPI1_DMA_BUFFER=1024
CONFIG_STM32F7_SPI2=y
CONFIG_STM32F7_SPI4=y
CONFIG_STM32F7_SPI5=y
CONFIG_STM32F7_SPI6=y
CONFIG_STM32F7_SPI_DMA=y
CONFIG_STM32F7_SPI_DMATHRESHOLD=8
CONFIG_STM32F7_TIM10=y
CONFIG_STM32F7_TIM11=y
CONFIG_STM32F7_UART4=y
CONFIG_STM32F7_UART7=y
CONFIG_STM32F7_UART8=y
CONFIG_STM32F7_USART1=y
CONFIG_STM32F7_USART2=y
CONFIG_STM32F7_USART3=y
CONFIG_STM32F7_USART6=y
CONFIG_STM32F7_USART_BREAKS=y
CONFIG_STM32F7_USART_INVERT=y
CONFIG_STM32F7_USART_SINGLEWIRE=y
CONFIG_STM32F7_USART_SWAP=y
CONFIG_STM32F7_WWDG=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_UART4_BAUD=57600
CONFIG_UART4_RXBUFSIZE=600
CONFIG_UART4_RXDMA=y
CONFIG_UART4_TXBUFSIZE=1500
CONFIG_UART7_BAUD=57600
CONFIG_UART7_RXBUFSIZE=600
CONFIG_UART7_SERIAL_CONSOLE=y
CONFIG_UART7_TXBUFSIZE=1500
CONFIG_UART8_BAUD=57600
CONFIG_UART8_RXBUFSIZE=600
CONFIG_UART8_RXDMA=y
CONFIG_UART8_TXBUFSIZE=1500
CONFIG_USART1_BAUD=57600
CONFIG_USART1_RXBUFSIZE=600
CONFIG_USART1_TXBUFSIZE=1500
CONFIG_USART2_BAUD=57600
CONFIG_USART2_IFLOWCONTROL=y
CONFIG_USART2_OFLOWCONTROL=y
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_RXDMA=y
CONFIG_USART2_TXBUFSIZE=1500
CONFIG_USART3_BAUD=57600
CONFIG_USART3_IFLOWCONTROL=y
CONFIG_USART3_OFLOWCONTROL=y
CONFIG_USART3_RXBUFSIZE=600
CONFIG_USART3_RXDMA=y
CONFIG_USART3_TXBUFSIZE=3000
CONFIG_USART3_TXDMA=y
CONFIG_USART6_BAUD=57600
CONFIG_USART6_RXBUFSIZE=600
CONFIG_USART6_RXDMA=y
CONFIG_USART6_TXBUFSIZE=1500
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_USERMAIN_STACKSIZE=2944
CONFIG_USER_ENTRYPOINT="nsh_main"