diff --git a/boards/px4/fmu-v5/cryptotest.cmake b/boards/px4/fmu-v5/cryptotest.cmake new file mode 100644 index 0000000000..55eb0fe3de --- /dev/null +++ b/boards/px4/fmu-v5/cryptotest.cmake @@ -0,0 +1,150 @@ + +px4_add_board( + PLATFORM nuttx + TOOLCHAIN arm-none-eabi + ARCHITECTURE cortex-m7 + ROMFSROOT px4fmu_common + IO px4_io-v2_default + UAVCAN_INTERFACES 2 + UAVCAN_TIMER_OVERRIDE 6 + CRYPTO sw_crypto + KEYSTORE stub_keystore + SERIAL_PORTS + GPS1:/dev/ttyS0 + TEL1:/dev/ttyS1 + TEL2:/dev/ttyS2 + TEL4:/dev/ttyS3 + DRIVERS + adc/ads1115 + adc/board_adc + barometer # all available barometer drivers + batt_smbus + camera_capture + camera_trigger + differential_pressure # all available differential pressure drivers + distance_sensor # all available distance sensor drivers + dshot + gps + heater + #imu # all available imu drivers + imu/analog_devices/adis16448 + imu/bosch/bmi055 + imu/invensense/icm20602 + imu/invensense/icm20689 + imu/invensense/icm20948 # required for ak09916 mag + irlock + lights # all available light drivers + lights/rgbled_pwm + magnetometer # all available magnetometer drivers + optical_flow # all available optical flow drivers + osd + pca9685 + pca9685_pwm_out + power_monitor/ina226 + #protocol_splitter + pwm_input + pwm_out_sim + pwm_out + px4io + rc_input + roboclaw + smart_battery/batmon + rpm + safety_button + telemetry # all available telemetry drivers + tone_alarm + uavcan + MODULES + airspeed_selector + attitude_estimator_q + battery_status + camera_feedback + commander + dataman + ekf2 + esc_battery + events + flight_mode_manager + fw_att_control + fw_pos_control_l1 + gyro_calibration + gyro_fft + land_detector + landing_target_estimator + load_mon + local_position_estimator + logger + mavlink + mc_att_control + mc_hover_thrust_estimator + mc_pos_control + mc_rate_control + #micrortps_bridge + navigator + rc_update + rover_pos_control + sensors + sih + temperature_compensation + uuv_att_control + uuv_pos_control + vmount + vtol_att_control + SYSTEMCMDS + bl_update + dmesg + dumpfile + esc_calib + gpio + hardfault_log + i2cdetect + led_control + mft + mixer + motor_ramp + motor_test + mtd + nshterm + param + perf + pwm + reboot + reflect + sd_bench + serial_test + system_time + top + topic_listener + tune_control + uorb + usb_connected + ver + work_queue + EXAMPLES + fake_gps + #fake_imu + #fake_magnetometer + #fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control + #hello + #hwtest # Hardware test + #matlab_csv_serial + #px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html + #px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html + #rover_steering_control # Rover example app + #uuv_example_app + #work_item + ) + +# For testing crypto with the stub_keystore, set keys to the PX4 test keys, +# for any real target using that keystore, these would probably be set as environment +# variables in the build environment + +# Key 0: The firmware signature check key (public key), used by bootloaders +# NOTE: for FMUv5 this is not really used, it is only for NuttX based bootloaders +set(ENV{PUBLIC_KEY0} "${CMAKE_SOURCE_DIR}/Tools/test_keys/key0.pub") + +# Key 1: An RSA2048 public key, used currently for logfile symmetric key exchange +set(ENV{PUBLIC_KEY1} "${CMAKE_SOURCE_DIR}/Tools/test_keys/rsa2048.pub") + +# FW Signing tool, using ed25519 (this uses by default the key in Tools/test_keys/test_keys.json) +set(ENV{SIGNING_TOOL} "${CMAKE_SOURCE_DIR}/Tools/cryptotools.py") diff --git a/boards/px4/fmu-v5/nuttx-config/cryptotest/defconfig b/boards/px4/fmu-v5/nuttx-config/cryptotest/defconfig new file mode 100644 index 0000000000..30d19f86cf --- /dev/null +++ b/boards/px4/fmu-v5/nuttx-config/cryptotest/defconfig @@ -0,0 +1,244 @@ +# +# This file is autogenerated: PLEASE DO NOT EDIT IT. +# +# You can use "make menuconfig" to make any modifications to the installed .config file. +# You can then do "make savedefconfig" to generate a new defconfig file that includes your +# modifications. +# +# CONFIG_DISABLE_ENVIRON is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set +# CONFIG_MMCSD_HAVE_CARDDETECT is not set +# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set +# CONFIG_MMCSD_MMCSUPPORT is not set +# CONFIG_MMCSD_SPI is not set +# CONFIG_NSH_DISABLEBG is not set +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_DISABLE_TIME is not set +CONFIG_ARCH="arm" +CONFIG_ARCH_BOARD_CUSTOM=y +CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config" +CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y +CONFIG_ARCH_BOARD_CUSTOM_NAME="px4" +CONFIG_ARCH_CHIP="stm32f7" +CONFIG_ARCH_CHIP_STM32F765II=y +CONFIG_ARCH_CHIP_STM32F7=y +CONFIG_ARCH_INTERRUPTSTACK=512 +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARMV7M_BASEPRI_WAR=y +CONFIG_ARMV7M_DCACHE=y +CONFIG_ARMV7M_DTCM=y +CONFIG_ARMV7M_ICACHE=y +CONFIG_ARMV7M_MEMCPY=y +CONFIG_ARMV7M_USEBASEPRI=y +CONFIG_BOARDCTL_RESET=y +CONFIG_BOARD_CRASHDUMP=y +CONFIG_BOARD_LOOPSPERMSEC=22114 +CONFIG_BOARD_RESET_ON_ASSERT=2 +CONFIG_BUILTIN=y +CONFIG_C99_BOOL8=y +CONFIG_CDCACM=y +CONFIG_CDCACM_PRODUCTID=0x0032 +CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v5.x" +CONFIG_CDCACM_RXBUFSIZE=600 +CONFIG_CDCACM_TXBUFSIZE=12000 +CONFIG_CDCACM_VENDORID=0x26ac +CONFIG_CDCACM_VENDORSTR="3D Robotics" +CONFIG_CLOCK_MONOTONIC=y +CONFIG_CRYPTO=y +CONFIG_CRYPTO_RANDOM_POOL=y +CONFIG_DEBUG_FULLOPT=y +CONFIG_DEBUG_HARDFAULT_ALERT=y +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEFAULT_SMALL=y +CONFIG_DEV_FIFO_SIZE=0 +CONFIG_DEV_PIPE_MAXSIZE=1024 +CONFIG_DEV_PIPE_SIZE=70 +CONFIG_DISABLE_MQUEUE=y +CONFIG_FAT_DMAMEMORY=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_LFN_ALIAS_HASH=y +CONFIG_FDCLONE_STDIO=y +CONFIG_FS_BINFS=y +CONFIG_FS_CROMFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FATTIME=y +CONFIG_FS_PROCFS=y +CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y +CONFIG_FS_PROCFS_MAX_TASKS=64 +CONFIG_FS_PROCFS_REGISTER=y +CONFIG_FS_ROMFS=y +CONFIG_GRAN=y +CONFIG_GRAN_INTR=y +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_I2C=y +CONFIG_I2C_RESET=y +CONFIG_IDLETHREAD_STACKSIZE=750 +CONFIG_LIBC_FLOATINGPOINT=y +CONFIG_LIBC_LONG_LONG=y +CONFIG_LIBC_STRERROR=y +CONFIG_MEMSET_64BIT=y +CONFIG_MEMSET_OPTSPEED=y +CONFIG_MMCSD=y +CONFIG_MMCSD_SDIO=y +CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y +CONFIG_MM_REGIONS=3 +CONFIG_MTD=y +CONFIG_MTD_BYTE_WRITE=y +CONFIG_MTD_PARTITION=y +CONFIG_MTD_RAMTRON=y +CONFIG_NAME_MAX=40 +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_ARCHROMFS=y +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_BUILTIN_APPS=y +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_CROMFSETC=y +CONFIG_NSH_DISABLE_IFCONFIG=y +CONFIG_NSH_DISABLE_IFUPDOWN=y +CONFIG_NSH_DISABLE_TELNETD=y +CONFIG_NSH_LINELEN=128 +CONFIG_NSH_MAXARGUMENTS=15 +CONFIG_NSH_NESTDEPTH=8 +CONFIG_NSH_QUOTE=y +CONFIG_NSH_ROMFSETC=y +CONFIG_NSH_ROMFSSECTSIZE=128 +CONFIG_NSH_STRERROR=y +CONFIG_NSH_VARS=y +CONFIG_OTG_ID_GPIO_DISABLE=y +CONFIG_PIPES=y +CONFIG_PREALLOC_TIMERS=50 +CONFIG_PRIORITY_INHERITANCE=y +CONFIG_PTHREAD_MUTEX_ROBUST=y +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_RAMTRON_SETSPEED=y +CONFIG_RAMTRON_WRITEWAIT=y +CONFIG_RAM_SIZE=245760 +CONFIG_RAM_START=0x20010000 +CONFIG_RAW_BINARY=y +CONFIG_RTC_DATETIME=y +CONFIG_SCHED_ATEXIT=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_HPWORKPRIORITY=249 +CONFIG_SCHED_HPWORKSTACKSIZE=1280 +CONFIG_SCHED_INSTRUMENTATION=y +CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y +CONFIG_SCHED_LPWORK=y +CONFIG_SCHED_LPWORKPRIORITY=50 +CONFIG_SCHED_LPWORKSTACKSIZE=1632 +CONFIG_SCHED_WAITPID=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SDMMC1_SDIO_MODE=y +CONFIG_SDMMC1_SDIO_PULLUP=y +CONFIG_SEM_NNESTPRIO=8 +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y +CONFIG_SERIAL_TERMIOS=y +CONFIG_SIG_DEFAULT=y +CONFIG_SIG_SIGALRM_ACTION=y +CONFIG_SIG_SIGUSR1_ACTION=y +CONFIG_SIG_SIGUSR2_ACTION=y +CONFIG_SIG_SIGWORK=4 +CONFIG_STACK_COLORATION=y +CONFIG_START_DAY=30 +CONFIG_START_MONTH=11 +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STM32F7_ADC1=y +CONFIG_STM32F7_BBSRAM=y +CONFIG_STM32F7_BBSRAM_FILES=5 +CONFIG_STM32F7_BKPSRAM=y +CONFIG_STM32F7_DMA1=y +CONFIG_STM32F7_DMA2=y +CONFIG_STM32F7_DMACAPABLE=y +CONFIG_STM32F7_FLOWCONTROL_BROKEN=y +CONFIG_STM32F7_I2C1=y +CONFIG_STM32F7_I2C2=y +CONFIG_STM32F7_I2C3=y +CONFIG_STM32F7_I2C4=y +CONFIG_STM32F7_I2C_DYNTIMEO=y +CONFIG_STM32F7_I2C_DYNTIMEO_STARTSTOP=10 +CONFIG_STM32F7_OTGFS=y +CONFIG_STM32F7_PROGMEM=y +CONFIG_STM32F7_PWR=y +CONFIG_STM32F7_RTC=y +CONFIG_STM32F7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y +CONFIG_STM32F7_RTC_MAGIC_REG=1 +CONFIG_STM32F7_SAVE_CRASHDUMP=y +CONFIG_STM32F7_SDMMC1=y +CONFIG_STM32F7_SDMMC_DMA=y +CONFIG_STM32F7_SERIALBRK_BSDCOMPAT=y +CONFIG_STM32F7_SERIAL_DISABLE_REORDERING=y +CONFIG_STM32F7_SPI1=y +CONFIG_STM32F7_SPI1_DMA=y +CONFIG_STM32F7_SPI1_DMA_BUFFER=1024 +CONFIG_STM32F7_SPI2=y +CONFIG_STM32F7_SPI4=y +CONFIG_STM32F7_SPI5=y +CONFIG_STM32F7_SPI6=y +CONFIG_STM32F7_SPI_DMA=y +CONFIG_STM32F7_SPI_DMATHRESHOLD=8 +CONFIG_STM32F7_TIM10=y +CONFIG_STM32F7_TIM11=y +CONFIG_STM32F7_UART4=y +CONFIG_STM32F7_UART7=y +CONFIG_STM32F7_UART8=y +CONFIG_STM32F7_USART1=y +CONFIG_STM32F7_USART2=y +CONFIG_STM32F7_USART3=y +CONFIG_STM32F7_USART6=y +CONFIG_STM32F7_USART_BREAKS=y +CONFIG_STM32F7_USART_INVERT=y +CONFIG_STM32F7_USART_SINGLEWIRE=y +CONFIG_STM32F7_USART_SWAP=y +CONFIG_STM32F7_WWDG=y +CONFIG_SYSTEM_CDCACM=y +CONFIG_SYSTEM_NSH=y +CONFIG_TASK_NAME_SIZE=24 +CONFIG_UART4_BAUD=57600 +CONFIG_UART4_RXBUFSIZE=600 +CONFIG_UART4_RXDMA=y +CONFIG_UART4_TXBUFSIZE=1500 +CONFIG_UART7_BAUD=57600 +CONFIG_UART7_RXBUFSIZE=600 +CONFIG_UART7_SERIAL_CONSOLE=y +CONFIG_UART7_TXBUFSIZE=1500 +CONFIG_UART8_BAUD=57600 +CONFIG_UART8_RXBUFSIZE=600 +CONFIG_UART8_RXDMA=y +CONFIG_UART8_TXBUFSIZE=1500 +CONFIG_USART1_BAUD=57600 +CONFIG_USART1_RXBUFSIZE=600 +CONFIG_USART1_TXBUFSIZE=1500 +CONFIG_USART2_BAUD=57600 +CONFIG_USART2_IFLOWCONTROL=y +CONFIG_USART2_OFLOWCONTROL=y +CONFIG_USART2_RXBUFSIZE=600 +CONFIG_USART2_RXDMA=y +CONFIG_USART2_TXBUFSIZE=1500 +CONFIG_USART3_BAUD=57600 +CONFIG_USART3_IFLOWCONTROL=y +CONFIG_USART3_OFLOWCONTROL=y +CONFIG_USART3_RXBUFSIZE=600 +CONFIG_USART3_RXDMA=y +CONFIG_USART3_TXBUFSIZE=3000 +CONFIG_USART3_TXDMA=y +CONFIG_USART6_BAUD=57600 +CONFIG_USART6_RXBUFSIZE=600 +CONFIG_USART6_RXDMA=y +CONFIG_USART6_TXBUFSIZE=1500 +CONFIG_USBDEV=y +CONFIG_USBDEV_BUSPOWERED=y +CONFIG_USBDEV_MAXPOWER=500 +CONFIG_USEC_PER_TICK=1000 +CONFIG_USERMAIN_STACKSIZE=2944 +CONFIG_USER_ENTRYPOINT="nsh_main"