px4-firmware/.ci/Jenkinsfile-hardware

#!/usr/bin/env groovy

pipeline {
  agent none
  stages {
    stage('Hardware Test') {

      parallel {

        stage("cubepilot_cubeorange_test") {
          stages {
            stage("build cubepilot_cubeorange_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make cubepilot_cubeorange_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'cubepilot_cubeorange'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'cubepilot_cubeorange_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("cuav_x7pro_test") {
          stages {
            stage("build cuav_x7pro_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make cuav_x7pro_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'cuav_x7pro'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'cuav_x7pro_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v3_test") {
          stages {
            stage("build px4_fmu-v3_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v3_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v3'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v3_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener px4io_status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v4_test") {
          stages {
            stage("build px4_fmu-v4_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v4_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v4'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v4_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v4pro_test") {
          stages {
            stage("build px4_fmu-v4pro_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v4pro_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v4pro'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v4pro_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_debug") {
          stages {
            stage("build px4_fmu-v5_debug") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_debug'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_debug'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
                    unstash 'px4_fmu-v5_debug'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_optimized") {
          stages {
            stage("build px4_fmu-v5_optimized") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_optimized'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_optimized'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v5_optimized'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_optimized/px4_fmu-v5_optimized.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_stackcheck") {
          stages {
            stage("build px4_fmu-v5_stackcheck") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_stackcheck'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_stackcheck'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
                    unstash 'px4_fmu-v5_stackcheck'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("px4_fmu-v5_test") {
          stages {
            stage("build px4_fmu-v5_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make px4_fmu-v5_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'px4_fmu-v5'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'px4_fmu-v5_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("modalai_fc-v1_test") {
          stages {
            stage("build modalai_fc-v1_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make modalai_fc-v1_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'modalai_fc-v1'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'modalai_fc-v1_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

        stage("nxp_fmuk66-v3_test") {
          stages {
            stage("build nxp_fmuk66-v3_test") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-05-04'
                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                }
              }
              steps {
                checkout scm
                sh 'export'
                sh 'make distclean'
                sh 'ccache -s'
                sh 'git fetch --tags'
                sh 'make nxp_fmuk66-v3_test'
                sh 'ccache -s'
                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
              }
              post {
                always {
                    sh 'make distclean'
                }
              }
            } // stage build
            stage("test") {
              agent {
                label 'nxp_fmuk66-v3'
              }
              stages {
                stage("flash") {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
                    unstash 'nxp_fmuk66-v3_test'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                  }
                }
                stage("tests") {
                  steps {
                    runTests()
                  }
                }
                stage("status") {
                  steps {
                    // configure
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
                    checkStatus()
                    quickCalibrate()
                  }
                }
                stage("print topics") {
                  steps {
                    printTopics()
                  }
                }

              }
            } // stage test
          }
        }

      } // parallel
    } // stage Hardware Test
  } // stages
  environment {
    CCACHE_DIR = '/tmp/ccache'
    CCACHE_NOHASHDIR = 1
    CI = true
  }
  options {
    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
    timeout(time: 120, unit: 'MINUTES')
    skipDefaultCheckout()
  }
}

void quickCalibrate() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1; param show CAL_ACC*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 1; param show CAL_GYRO*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 1; param show SENS_BOARD*"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1; param show CAL_MAG*"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
}

void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'

  // run logger
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
  // status commands
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output0"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm info -d /dev/pwm_output1" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -r 2"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  // stop logger
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
}

void resetParameters() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "CBRK_BUZZER" --value "782097"'
  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SDLOG_DIRS_MAX" --value "1"'
}

void runTests() {
  resetParameters()

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink_tests" || true' // TODO
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test"'

  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'

  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
}

void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_3"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_wind"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener commander_state"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_odometry"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_optical_flow_vel"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_states"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_wind"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener event"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener input_rc"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener led_control"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener log_message"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener manual_control_setpoint"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mavlink_log"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mission"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener multirotor_motor_limits"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener optical_flow"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_controller_landing_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_setpoint_triplet"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener radio_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener rate_ctrl_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener safety"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fft"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_preflight_mag"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener test_motor"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command_ack"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_control_mode"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_global_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_land_detected"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position_setpoint"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status"'
}