px4-firmware/msg/vehicle_attitude_setpoint.msg

28 lines
1.3 KiB
Plaintext
Raw Normal View History

uint64 timestamp # time since system start (microseconds)
float32 roll_body # body angle in NED frame (can be NaN for FW)
float32 pitch_body # body angle in NED frame (can be NaN for FW)
float32 yaw_body # body angle in NED frame (can be NaN for FW)
2018-08-07 10:42:32 -03:00
float32 yaw_sp_move_rate # rad/s (commanded by user)
# For quaternion-based attitude control
2018-08-07 10:42:32 -03:00
float32[4] q_d # Desired quaternion for quaternion control
# For clarification: For multicopters thrust_body[0] and thrust[1] are usually 0 and thrust[2] is the negative throttle demand.
# For fixed wings thrust_x is the throttle demand and thrust_y, thrust_z will usually be zero.
float32[3] thrust_body # Normalized thrust command in body NED frame [-1,1]
2018-08-07 10:42:32 -03:00
bool roll_reset_integral # Reset roll integral part (navigation logic change)
bool pitch_reset_integral # Reset pitch integral part (navigation logic change)
bool yaw_reset_integral # Reset yaw integral part (navigation logic change)
2018-08-07 10:42:32 -03:00
bool fw_control_yaw # control heading with rudder (used for auto takeoff on runway)
2015-10-13 17:47:26 -03:00
2018-08-07 10:42:32 -03:00
uint8 apply_flaps # flap config specifier
uint8 FLAPS_OFF = 0 # no flaps
uint8 FLAPS_LAND = 1 # landing config flaps
uint8 FLAPS_TAKEOFF = 2 # take-off config flaps
2016-04-25 18:36:13 -03:00
# TOPICS vehicle_attitude_setpoint mc_virtual_attitude_setpoint fw_virtual_attitude_setpoint