Lucas De Marchi
ec5d0b6c08
AP_HAL_Linux: reorder members and methods and use C++ initializer
2015-06-30 09:10:53 +10:00
Michael du Breuil
a382ce2b0c
AP_GPS: Add support for logging ublox RXM-RAWX messages
...
Can only record 32 satellites raw info before memory corruption occurs. (And raised the limit on normal RXM-RAW messages to 22)
2015-06-30 09:05:49 +10:00
Michael du Breuil
d665c85c20
DataFlash: Add RXM-RAWX logging messages
2015-06-30 09:05:48 +10:00
mirkix
38a8a772f8
AP_GPS: Add fix status 3D+DGPS
2015-06-30 09:00:31 +10:00
Andrew Tridgell
15efae5a48
HAL_SITL: use SITL_NUM_CHANNELS
2015-06-30 08:55:02 +10:00
Andrew Tridgell
f8944ab6be
SITL: define number of RC out channels
2015-06-30 08:54:46 +10:00
Vladislav Zakharov
be4b6033e4
AP_HAL_Linux: Navio RCInput reimplemented.
2015-06-29 16:45:43 +10:00
Vladislav Zakharov
e505eb2cd8
AP_HAL_Linux: Changes in Scheduler: Added defines for delays, RCIN_RERIOD changed
2015-06-29 16:45:42 +10:00
Przemek Lekston
90378b21da
AP_BattMonitor: Fix battery monitor Floating Point Exception in SITL
...
Adds a sanity check to avoid division by zero when BATT_CAPACITY is set to 0.
2015-06-29 16:42:52 +10:00
Andrew Tridgell
ff88932091
SITL: setup turbulence in JSBSim
2015-06-29 11:25:59 +10:00
Andrew Tridgell
92c9779d18
HAL_SITL: pass turbulence to simulators
2015-06-29 11:25:44 +10:00
Randy Mackay
ef20676c67
GPS: fix INJECT_TO param desc and add definition
...
No functional change
2015-06-27 16:31:03 +09:00
Randy Mackay
0264b1aa84
AC_Circle: set only xy position targets
2015-06-27 15:43:49 +09:00
Randy Mackay
0b9c7c2a3b
SerialManager: add SToRM32 to protocol param description
2015-06-27 11:18:17 +09:00
Víctor Mayoral Vilches
ab5f1b3a24
BusTest: Fix compilation error with AP_ADC
2015-06-26 21:59:22 +10:00
Peter Barker
723c37bcf7
DataFlash: backend/frontend split
2015-06-26 16:02:50 +10:00
Andrew Tridgell
21c8a2d94a
AP_Common: override new and delete on all platforms to zero memory
...
this guarantees that all classes get zero initial members when
they are dynamically allocated.
2015-06-26 15:55:19 +10:00
Andrew Tridgell
eeb97800ae
AC_AttitudeControl: allow for tail pass-thru in ACRO mode
...
this allows for all channels to be passed through
2015-06-26 12:45:38 +09:00
Michael du Breuil
e45f3537cf
APM_Control: Remove duplicate include statements
2015-06-25 10:23:47 +10:00
Michael du Breuil
aa04c81e3c
APM_Control: Fix a typo in the docstring for YAW2SRV_SLIP
2015-06-25 10:22:36 +10:00
Tom Pittenger
e6122d1a4e
AP_Mission: ensure cache coherence on mission resume
...
- when resuming a mission we should read the value from storage of the same index to ensure we're not continuing an old cached version of the mission item.
- inherent problem: DO commands will continue and will be unaffected unless the new mission has a different DO_ command structure. If so, a set_current_cmd() or reset() should be issued by the GCS.
2015-06-25 10:21:06 +10:00
Andrew Tridgell
a81590f7ac
HAL_SITL: prevent FPE on zero range with optflow
2015-06-25 10:08:53 +10:00
Randy Mackay
9f17fc17ab
NavEKF: update parameter descriptions
2015-06-24 16:25:14 +09:00
Paul Riseborough
87e6a24154
AP_NavEKF: Add public method to reset EKF height datum and baro alt
2015-06-24 16:25:11 +09:00
Randy Mackay
1e3e65e443
AC_AttControl: add shift_ef_yaw_target
...
This allows shifting the target heading in case the EKF shifts it's
heading estimate
2015-06-24 11:49:32 +09:00
Paul Riseborough
e3ccb74e12
AP_NavEKF: Publish amount of in-flight yaw angle reset
2015-06-24 11:49:29 +09:00
Gustavo Jose de Sousa
c72dc9bd45
AP_InertialSensor: make single rotation on MPU9250
...
The previous implementation made some boards apply two rotations to suit
their default orientation. That was happening because there was an
unconditional rotation being done (commented as "rotate for bbone
default").
This commit makes that unconditional rotation as a default rotation
instead and adjusts the former additional rotations to be single
rotations.
2015-06-22 17:45:20 +10:00
Gustavo Jose de Sousa
3dad768e8b
AP_InertialSensor: log failure to initialize after max attempts on MPU9250
...
This happens for example when you are trying to use an SPI speed that's
above the one supported by the sensor or the controller.
2015-06-22 17:45:20 +10:00
Gustavo Jose de Sousa
587471ab54
AP_InertialSensor: disable I2C on MPU9250
...
As the datasheet says: "To prevent switching into I2C mode when using
SPI, the I2C interface should be disabled by setting the I2C_IF_DIS
configuration bit."
We also reset the sensor like PX4Firmware does for initializing the
MPU6000. See: ee1d8cd770/src/drivers/mpu6000/mpu6000.cpp (L695)
2015-06-22 17:45:20 +10:00
Michael du Breuil
6cd81ae1fb
APM_Control: Add PID logging to yaw controller
2015-06-22 15:41:44 +10:00
Michael du Breuil
225c946af0
DataFlash: Add PIDS for steering logging
2015-06-22 15:41:44 +10:00
Robert Lefebvre
11214b3414
AP_Motors: move constraints to set_throttle
2015-06-22 13:52:59 +09:00
Grant Morphett
84ac8abc42
AP_Mount: Fixed a bug with wrapping of panning angles.
2015-06-22 09:32:26 +09:00
Andrew Tridgell
a424686d2f
DataFlash: reduce future merge conflicts
...
an enum makes it easier to merge new messages
2015-06-20 16:18:50 +10:00
Andrew Tridgell
81e6d88560
StorageManager: fixed hang in erase()
...
found by coverity
2015-06-20 15:00:57 +10:00
Andrew Tridgell
4eab27abe9
AP_InertialSensor: fixed logic bug in MPU6000 init
...
thanks to coverity
2015-06-20 14:53:04 +10:00
Andrew Tridgell
131b345ccc
APM_Control: cleanup some coverity warnings
2015-06-20 13:30:32 +10:00
Andrew Tridgell
322a61635f
SITL: allow extra arguments to be passed to last_letter
2015-06-19 16:39:46 +10:00
Robert Lefebvre
0c92565d23
AP_MotorsHeli: add Critical Rotor Speed param, use to switch off runup_complete
2015-06-19 15:10:53 +09:00
Robert Lefebvre
3ad6700c5d
AP_MotorsHeli: add getters for rotor speed
2015-06-19 15:10:51 +09:00
Robert Lefebvre
8b917b82ee
AP_MotorsHeli: Simplify set_desired_rotor_speed function definition
2015-06-19 15:10:50 +09:00
Robert Lefebvre
79e8c8f7f7
AP_MotorsHeli: whitespace fixes
2015-06-19 15:10:47 +09:00
Georacer
b375a8debf
SITL: Allows last_letter to start at the location specified by the SITL arguments
2015-06-19 12:49:29 +10:00
Leonard Hall
cfc388934b
AC_AttControl: add set_accel_roll_max
...
Also equivalents for pitch and yaw
2015-06-18 23:06:33 +09:00
mirkix
7c55689aad
AP_HAL_Linux: Fix loading Firmware
2015-06-18 10:13:49 +10:00
Paul Riseborough
6ba8cd05ff
AP_NavEKF: Fix bug preventing GPS vertical velocity being used
...
This fixes a bug that prevents GPS velocity being used permanently if there is a temporary unavailability
2015-06-18 09:01:21 +10:00
mirkix
a1d478909a
AP_BattMonitor: Add Linux support for example
2015-06-18 09:00:01 +10:00
mirkix
d169fea9ec
AP_AHRS: Add Linux support for example
2015-06-18 08:59:16 +10:00
mirkix
588a16dec2
AP_InertialSensor: Add Linux support for VibTest example
2015-06-18 08:48:23 +10:00
Andrew Tridgell
de11b5394e
GCS_MAVLink: support NSH shell with SERIAL_CONTROL
2015-06-17 20:30:10 +10:00