Randy Mackay
b15d4379d8
AC_WPNav: use atan2f, make methods const
2014-03-30 23:09:51 +09:00
Randy Mackay
3ad635feeb
AC_AttControl: 45deg/sec yaw rate for Auto, RTL
2014-03-30 15:44:14 +09:00
Randy Mackay
d27ca53a9d
AC_WPNav: spline sets origin vel to zero when no prev segment
...
Issue caught by Michael Oborne
2014-03-30 15:19:18 +09:00
Randy Mackay
7dfde39e19
AC_WPNav: advance_spline to use dt
2014-03-30 15:02:07 +09:00
Randy Mackay
c0458b786a
AC_WPNav: check acceleration is non zero
2014-03-30 11:52:44 +09:00
Randy Mackay
f0f3688172
AC_WPNav: rounder corners for short spline segments
2014-03-30 11:52:41 +09:00
priseborough
9c5f564dc5
AP_NavEKF : Fixes bug in initial earth magnetic field states
...
The calculation for these states was not being bias corrected
2014-03-30 07:43:52 +11:00
Randy Mackay
7bff8e9312
AC_AttControl: constrain earth frame yaw angle error
...
This temporarily resolves the wobble we see in Auto when the target
heading is suddenly changed leading to a large yaw angle error
2014-03-29 20:42:21 +09:00
Randy Mackay
197683d539
WPNav: clean up spline comments
2014-03-29 17:57:47 +09:00
priseborough
e1819bb53a
AP_NavEKF : Add initial parameter defaults for Copter, Rover and Plane
2014-03-29 14:06:43 +11:00
Randy Mackay
ac339a0289
Mission: add decoding of NAV_SPLINE command
2014-03-28 09:23:30 +09:00
Randy Mackay
e7be622eef
GCS_MAVLink: generate after adding NAV_SPLINE cmd
2014-03-28 09:23:28 +09:00
Randy Mackay
519d5fc444
GCS_MAVLink: add MAV_CMD_NAV_SPLINE_WAYPOINT cmd
...
This is the same as a NAV_WAYPOINT except that the vehicle flies a
spline curved path to the destination
2014-03-28 09:23:23 +09:00
Randy Mackay
24eb195aa3
WPNav: add yaw control for straight line wp nav
2014-03-28 09:23:13 +09:00
Randy Mackay
b42b12f7be
AC_WPNav: add get_spline_yaw
2014-03-28 09:23:07 +09:00
Randy Mackay
f2d9ad41aa
Mission: minor comment update
2014-03-28 09:22:56 +09:00
Randy Mackay
e5e71ce371
WPNav: add spline support
2014-03-28 09:22:53 +09:00
Michael Day
e1d193f539
GCS_MAVLink: Generated code from message additions for autofence.
2014-03-27 09:26:20 +11:00
Michael Day
c5ebd120f1
GCS_MAVLink: XML for MAV_CMD_DO_FENCE_ENABLE and MAV_SYS_STATUS_GEOFENCE
2014-03-27 09:26:20 +11:00
priseborough
55c60b8f07
AP_NavEKF : Reduce Magnetometer innovation consistency check threshold
2014-03-26 21:29:47 +11:00
priseborough
45b1a2fa46
AP_NavEKF : Reduce GPS position innovation consistency fail threshold
...
This patch reduces the maximum acceptable GPS jump from approximately 16 to 8 metres
This will provide copters with more protection for close in loiter situations
2014-03-26 21:29:45 +11:00
Andrew Tridgell
8c0c9c317e
RC_Channel: prevent a numerical exception with bad mount parameters
2014-03-26 17:38:27 +11:00
Andrew Tridgell
bafc664750
AP_NavEKF: use APM_BUILD_TYPE() macro
2014-03-26 12:42:11 +11:00
Andrew Tridgell
fbec098e2f
AP_Vehicle: added APM_BUILD_TYPE() macro
...
this makes checking build type less fragile
2014-03-26 12:41:53 +11:00
Andrew Tridgell
e3792f9b26
AP_NavEKF: added a mechanism for per-vehicle-type defaults in EKF
2014-03-26 12:30:17 +11:00
Andrew Tridgell
6b2f0b9553
AP_Vehicle: added defines for main vehicle types
2014-03-26 12:15:45 +11:00
Andrew Tridgell
6bf2b5033e
DataFlash: support logging up to 14 RC input channels
2014-03-25 16:39:19 +11:00
Andrew Tridgell
6039eab442
RC_Channel: support up to 12 aux channels on PX4
...
this allows RC13 and RC14 to work correctly as aux outputs on Pixhawk
2014-03-25 15:42:48 +11:00
Andrew Tridgell
64772cede8
GCS_MAVLink: rebuild MAVLink headers
2014-03-25 14:47:43 +11:00
Andrew Tridgell
d24547b390
GCS_MAVLink: merge latest msgs from upstream
2014-03-25 14:47:05 +11:00
Andrew Tridgell
6eee2421cc
AP_HAL: removed RCInput valid_channels() and added new_input() and num_channels()
...
the valid_channels() method was inconsistently implemented between
boards, and served two quite different purposes. It is clearer as two
functions
2014-03-25 14:39:41 +11:00
Andrew Tridgell
27dbf608c8
DataFlash: fixed a build warning
2014-03-25 13:31:21 +11:00
Andrew Tridgell
2a9a89e020
HAL_PX4: fixes for merged upstream PX4Firmware
2014-03-25 10:30:00 +11:00
priseborough
17cdac7bc8
AP_NavEKF : Clean up angle and mag field initialisation
...
This path reduces duplicated code, eliminates unused variables and
causes the earth magnetic field states to be reset when exiting static mode
which will occur every time copter is armed. This enables copters to be
powered on and initialised inside vehicles or houses, without bad earth
field values affecting flight.
2014-03-24 19:54:48 +11:00
Andrew Tridgell
f05b90bfd2
GCS_MAVLink: fixed some compiler warnings
2014-03-24 12:52:39 +11:00
Andrew Tridgell
0af35bd636
AP_Mission: fixed some compiler warnings
2014-03-24 12:52:27 +11:00
Andrew Tridgell
2763393908
AP_InertialSensor: fixed some compiler warnings
2014-03-24 12:52:16 +11:00
Andrew Tridgell
c6f3e0a81c
AP_GPS: fixed example builds
2014-03-24 12:20:34 +11:00
Andrew Tridgell
271ba3a6bc
AP_InertialNav: fixed example build
2014-03-24 12:03:47 +11:00
Andrew Tridgell
1b1a92251f
DataFlash: allow drivers to setup their own logging formats
...
this allows drivers to ask the dataflash driver to add new log formats
2014-03-24 12:03:31 +11:00
Andrew Tridgell
5630bb1ef6
AP_GPS: added detailed hardware status logging for uBlox
...
this gives us noise, jamming and RF information from the uBlox
protocol. This will hopefully allow a more detailed investigation of
antenna choices and RF interference
2014-03-24 12:02:37 +11:00
Andrew Tridgell
7ff293ca38
AP_GPS: added DataFlash to GPS init to allow for detailed logging
...
this will allow GPS drivers to log much more detailed device specific
information
2014-03-24 12:01:13 +11:00
Andrew Tridgell
485ae596fc
AP_Compass: fixed last_update for secondary compass with primary failed
...
this ensures EKF and DCM will use a secondary compass if the primary
fails
2014-03-23 22:05:17 +11:00
Matthew Lloyd
60a4f74de6
AP_Compass: avoid division by zero if we haven't received any mag reports
...
Otherwise, get_field() will return NaNs after once every few calls to
read() during compassmot on PX4 platforms, which causes compassmot to fail.
This is a quick hack around the deeper issue, which could be something
like the PX4 mag driver experiencing starvation and skipping mag reports,
buffer overrun or something else that causes mag reports to be dropped.
Or perhaps we should never expect in the first place that we will always
receive at least one mag report between calls to read().
2014-03-23 21:22:32 +11:00
priseborough
7ae86b3979
AP_NavEKF : Track baro height observations pre-arm
...
This prevents copter from failing the pre-arm height discrepancy test
2014-03-23 18:25:50 +11:00
priseborough
7780d55788
AP_NavEKF : Prevent large magnetic field adaptations early in flight
2014-03-22 19:55:26 +11:00
Randy Mackay
3efad982c0
GCS_Mavlink: return MISSION_INVALID when conversion fails
...
Requested by MichaelO to allow better error message to be displayed to
user when the mission upload from the GCS to vehicle fails
2014-03-22 11:29:36 +09:00
Paul Riseborough
f7007569d1
AP_NavEKF : Fix bug that limits copter sensor delay compensation to 125
...
msec
2014-03-21 21:52:20 +11:00
Paul Riseborough
b2c0979947
AP_NavEKF : Fixes bug that causes accel bias to diverge in static mode, preventing copter arming
2014-03-21 21:49:50 +11:00
Andrew Tridgell
a55c4e2296
AP_TECS: set target airspeed, not min/max airspeed, on landing
...
this seems to prevent ballooning of the altitude when we are in the
landing approach, and gives a much smoother landing
2014-03-20 17:34:39 +11:00
Andrew Tridgell
98530928b5
AP_TECS: make target landing speed a float
...
some users may want more precise control
2014-03-20 17:34:36 +11:00
Andrew Tridgell
b1ad2be897
AP_SpdHgtControl: added get_target_airspeed() interface
2014-03-20 17:34:29 +11:00
Michael Day
bd7e1b82e1
AP_TECS: Auto landing now takes throttle_nudge into account.
2014-03-20 17:34:26 +11:00
Michael Day
861690dea2
AP_TECS: New params LAND_ARSPD and LAND_THR auto-slowing landings.
...
Also controlling pitch by ignoring height error during landing.
This serves to keep the nose up.
2014-03-20 17:34:23 +11:00
Andrew Tridgell
3bdc22d672
AP_Mission: make p1 16 bit
...
this gives us a 16 bit value for extra data on a location, allowing
for an accurate angle in centi-degrees.
Also add validation of the size of the union arms in Content
2014-03-20 16:57:09 +11:00
Andrew Tridgell
959cafef8d
AP_Common: make alt in Location 24 bit
...
this allows for up to 83km mission altitudes, while allowing for 1
more byte in the command structure, making p1 16 bits
2014-03-20 16:57:09 +11:00
Andrew Tridgell
d508c7f37f
GCS_MAVLink: re-generate MAVLink headers
2014-03-20 10:21:28 +11:00
Andrew Tridgell
106fda773f
GCS_MAVLink: merge XML from upstream
2014-03-20 10:20:00 +11:00
Andrew Tridgell
8af9573806
GCS_MAVLink: allow logging of RADIO_STATUS, very useful for link analysis
2014-03-20 09:56:37 +11:00
Michael Day
68dbfd6315
DataFlash: Add Log_Write_Radio to store RSSI and noise on board.
2014-03-20 09:56:37 +11:00
Andrew Tridgell
8202cf437b
AP_Relay: fixed Pixhawk relay pin numbers
...
thanks to Craig for spotting this!
2014-03-20 09:40:08 +11:00
Paul Riseborough
8a2d16d13d
AP_NavEKF : modifed Zaccel bias noise parameter to prevent unstable bias estimate
2014-03-20 08:50:00 +11:00
Randy Mackay
c520cb789c
Mission: cmd field types to match mavlink commands
...
Split Set-Servo and Repeat-Servo command structures
Split Set-Relay and Repeat-Relay command structures
2014-03-19 12:14:22 +09:00
Andrew Tridgell
0832aba6bc
GCS_MAVLINK: moved deferred message handling into common code
2014-03-19 12:14:15 +09:00
Andrew Tridgell
8d89a64312
GCS_MAVLink: moved handling of MISSION_ITEM into common code
2014-03-19 12:14:09 +09:00
Andrew Tridgell
ba8c4b86a0
AP_InertialNav: fixed example build
2014-03-19 12:14:08 +09:00
Andrew Tridgell
d36989f6a1
AP_HAL: fixed example build
2014-03-19 12:14:06 +09:00
Andrew Tridgell
d3d71d597c
AP_Baro: fixed example build
2014-03-19 12:14:05 +09:00
Andrew Tridgell
dbd8f4b735
AP_Airspeed: fixed example build
2014-03-19 12:14:03 +09:00
Andrew Tridgell
afab8a9c5b
AP_AHRS: fixed example build
2014-03-19 12:14:02 +09:00
Andrew Tridgell
04587efb2d
AC_WPNav: fixed example build
2014-03-19 12:14:00 +09:00
Andrew Tridgell
1e9dcba3da
AC_Sprayer: fixed example build
2014-03-19 12:13:59 +09:00
Andrew Tridgell
4507c0fc4c
AC_Fence: fixed example build
2014-03-19 12:13:57 +09:00
Andrew Tridgell
73ae38eaf0
AC_AttitudeControl: fixed example build
2014-03-19 12:13:56 +09:00
Andrew Tridgell
23e296dd00
GCS_Console: fixed example build
2014-03-19 12:13:55 +09:00
Andrew Tridgell
5f85792224
DataFlash: fixed example build
2014-03-19 12:13:53 +09:00
Andrew Tridgell
2a199c4f03
AP_Notify: fixed example build
2014-03-19 12:13:51 +09:00
Andrew Tridgell
6eece3a278
AP_Mount: fixed example build
2014-03-19 12:13:50 +09:00
Andrew Tridgell
acd54d0826
AP_Math: fixed example build
2014-03-19 12:13:48 +09:00
Andrew Tridgell
731f980327
AP_InertialSensor: fixed example build
2014-03-19 12:13:47 +09:00
Andrew Tridgell
965f6bd3bd
GCS_MAVLink: make DataFlash a pointer
...
handle sketches where DataFlash is not available
2014-03-19 12:13:37 +09:00
Andrew Tridgell
b85c5123b2
GCS_MAVLink: added save parameter to handle_request_data_stream()
...
this allows copter to not save stream rate changes
2014-03-19 12:13:35 +09:00
Andrew Tridgell
79bb14b8c1
GCS_MAVLink: moved RADIO_STATUS handling into common code
2014-03-19 12:13:34 +09:00
Andrew Tridgell
144217ac74
GCS_MAVLink: moved parameter and stream handling into common code
...
this keeps it in common between vehicles, and saves stack space
2014-03-19 12:13:32 +09:00
Andrew Tridgell
06c578eb34
GCS_MAVLink: re-generate MAVLink headers
2014-03-19 12:13:31 +09:00
Andrew Tridgell
0b811ba6a9
GCS_MAVLink: added have_flow_control() method
...
can be used to change speed of handling some protocol methods, as we
know communication will be reliable
2014-03-19 12:13:25 +09:00
Randy Mackay
c462adf2ee
GCS_MAVLink: added five handle_mission methods
...
The five methods moved from the vehicle specific code are
handle_mission_request_list, set_current, count, clear_all and
write_partial_list
2014-03-19 12:13:19 +09:00
Randy Mackay
3938fb7255
GCS_MAVLink: loiter direction removed
...
This is now handled in Mission library
2014-03-19 12:13:18 +09:00
Randy Mackay
37cff752c8
Mission: handle Loiter direction
...
loiter-unlimited, loiter-turns and loiter-time cms specify the turn
direction in Param3. This is stored in the location's loiter_ccw flag.
Previously supported only in Plane, moving here allows us to share more
code with Plane, Copter, Rover.
2014-03-19 12:13:16 +09:00
Andrew Tridgell
add2416dbe
GCS_MAVLink: added handle_mission_request() common function
...
this handles requests for mission items, using stack saving
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:13:10 +09:00
Andrew Tridgell
ce29bbe394
GCS_MAVLink: save some memory in log download
...
use an existing buffer instead of using the mavlink _send()
function. This saves some stack space in log download
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:13:09 +09:00
Randy Mackay
c75560218d
Mission: command specific structures
2014-03-19 12:12:51 +09:00
Randy Mackay
865a4de33d
Common: use PACKED instead of pragma pack for Location
2014-03-19 12:12:49 +09:00
Randy Mackay
869f325c66
DataFlash: Log_Write_MavCmd replaces Log_Write_Cmd
2014-03-19 12:12:43 +09:00
Andrew Tridgell
3a6698f54b
AP_Mission: fixed typo
2014-03-19 12:12:42 +09:00
Andrew Tridgell
3538621c48
AP_Mission: doc updates
2014-03-19 12:12:40 +09:00
Randy Mackay
48329c1bba
Mission: bug fix for loading consecutive do-cmds
...
The verify step was not being run for the 2nd consecutive do-command in
a mission list
2014-03-19 12:12:37 +09:00
Randy Mackay
ece02b0c9a
Mission: get_prev_nav_cmd returns int16
2014-03-19 12:12:34 +09:00
Randy Mackay
266a1ce9af
Mission: bug fix set_current_cmd
...
If mission had completed desired command index was ignored
2014-03-19 12:12:27 +09:00
Andrew Tridgell
107cc2c126
AP_Mission: added truncate() function
...
Used when loading a mission while flying
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2014-03-19 12:12:21 +09:00