tx2-batman-mist_ws/README.md

56 lines
1.4 KiB
Markdown
Raw Normal View History

2021-08-12 19:35:01 -03:00
### Clone the package
```
git clone http://git.mistlab.ca/vvaradharajan/mist_ws.git
```
2021-08-11 20:45:58 -03:00
2021-08-11 20:49:58 -03:00
# Dependencies to install
```
sudo apt-get install python-catkin-tools python-wstool ros-kinetic-cmake-modules protobuf-compiler autoconf ros-kinetic-mavros* ros-kinetic-tf* \
ros-kinetic-rviz ros-kinetic-cv-bridge ros-kinetic-image-geometry ros-kinetic-pcl-* ros-kinetic-octomap* ros-kinetic-image-proc \
ros-kinetic-nmea-comms ffmpeg libusb-1.0-0-dev libsdl2-dev
2021-08-11 20:49:58 -03:00
```
2021-08-12 19:35:01 -03:00
# Setting up the bat0 phy interface
PLEASE SET THIS UP BEFORE ATTEMPTING TO USE BATMAN NODE.
Please refer to batman-README.md
2021-08-11 20:49:58 -03:00
2021-08-12 19:35:01 -03:00
# DJI M300
This workspace includes relevant packages to run [rosbuzz](https://github.com/MISTLab/ROSBuzz) with the [DJI OSDK](https://github.com/dji-sdk/Onboard-SDK-ROS) on the M300 drones.
The workspace has been tested in Ubuntu 16.04 and ROS Kinetic.
2021-08-11 20:45:58 -03:00
### Setup the workspace
```
cd mist_ws
2021-08-11 20:45:58 -03:00
wstool init
2021-08-12 19:35:01 -03:00
wstool merge packages_https_m300_batman.rosinstall
2021-08-11 20:45:58 -03:00
wstool update
```
### Troubleshooting
* In case of permission error, make sure to follow the [permission](https://github.com/dji-sdk/Onboard-SDK-ROS#3permission) section to have read/write access for the uart communication.
# Spiri
2021-08-12 19:35:01 -03:00
### Setup the workspace
```
cd mist_ws
wstool init
wstool merge packages_https_spiri_batman.rosinstall
wstool update
```
# DJI M100
# Khepera IV
2021-08-12 19:35:01 -03:00
# Spot
### Build the whole workspace
```
catkin config -DCMAKE_BUILD_TYPE=Release -DSIM=0 -DKIN=1
catkin build
````