Introduce ClinicError, and use it in fail(). The CLI runs main(),
catches ClinicError, formats the error message, prints to stderr
and exits with an error.
As a side effect, this refactor greatly improves the accuracy of
reported line numbers in case of error.
Also, adapt the test suite to work with ClinicError.
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
The motivation for this change is to clean up the output_templates()
method a little bit, as it accounts for ~10% of the lines of code in
clinic.py; removing some clutter helps readability.
Previously, only function docstrings were checked for non-ASCII characters.
Also, improve the warn() message.
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
Introduce docstring_append() helper, and use it for both parameter and
function docstrings. Remove docstring fixup from
do_post_block_processing_cleanup(); instead, make sure no fixup is needed.
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
- Use ArgumentParser.error() to handle CLI errors
- Put the entire CLI in main()
- Rework ClinicExternalTest to call main() instead of using subprocesses
Co-authored-by: AlexWaygood <alex.waygood@gmail.com>
The _xxsubinterpreters module should not rely on internal API. Some of the functions it uses were recently moved there however. Here we move them back (and expose them properly).
We tried this before with a dict and for all interned strings. That ran into problems due to interpreter isolation. However, exclusively using a per-interpreter cache caused some inconsistency that can eliminate the benefit of interning. Here we circle back to using a global cache, but only for statically allocated strings. We also use a more-basic _Py_hashtable_t for that global cache instead of a dict.
Ideally we would only have the global cache, but the optional isolation of each interpreter's allocator means that a non-static string object must not outlive its interpreter. Thus we would have to store a copy of each such interned string in the global cache, tied to the main interpreter.
This mostly extracts a whole bunch of stuff out of generate_cases.py into separate files, but there are a few other things going on here.
- analysis.py: `Analyzer` etc.
- instructions.py: `Instruction` etc.
- flags.py: `InstructionFlags`, `variable_used`, `variable_used_unspecialized`
- formatting.py: `Formatter` etc.
- Rename parser.py to parsing.py, to avoid conflict with stdlib parser.py
- Blackify most things
- Fix most mypy errors
- Remove output filenames from Generator state, add them to `write_instructions()` etc.
- Fix unit tests
Move the private _PyInterpreterID C API to the internal C API: add a
new pycore_interp_id.h header file.
Remove Include/interpreteridobject.h and
Include/cpython/interpreteridobject.h header files.
Add test for the 'destination <name> clear' command,
and the 'destination' directive in general.
Fix two bugs in 'destination <name> clear' command:
1. The text attribute of the allocator is called 'text', not '_text'
2. Return after processing the 'clear' command,
instead of proceeding directly to the fail().
This restores a corner case: when the generator is run with working directory set to Tools/cases_generator, the source filenames listed in the generated provenance header should be relative to the repo root directory.
By turning `assert(kwnames == NULL)` into a macro that is not in the "forbidden" list, many instructions that formerly were skipped because they contained such an assert (but no other mention of `kwnames`) are now supported in Tier 2. This covers 10 instructions in total (all specializations of `CALL` that invoke some C code):
- `CALL_NO_KW_TYPE_1`
- `CALL_NO_KW_STR_1`
- `CALL_NO_KW_TUPLE_1`
- `CALL_NO_KW_BUILTIN_O`
- `CALL_NO_KW_BUILTIN_FAST`
- `CALL_NO_KW_LEN`
- `CALL_NO_KW_ISINSTANCE`
- `CALL_NO_KW_METHOD_DESCRIPTOR_O`
- `CALL_NO_KW_METHOD_DESCRIPTOR_NOARGS`
- `CALL_NO_KW_METHOD_DESCRIPTOR_FAST`
Add various missing annotations in the following classes:
- BlockPrinter
- CConverter
- CLanguage
- FormatCounterFormatter
- Language
- _TextAccumulator
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
This moves EXIT_TRACE, SAVE_IP, JUMP_TO_TOP, and
_POP_JUMP_IF_{FALSE,TRUE} from ceval.c to bytecodes.c.
They are no less special than before, but this way
they are discoverable o the copy-and-patch tooling.
Fetch CONFIG_ARGS from the original source directory, instead of from
the copied source tree. When "make clean" is executed in the copied
source tree, the build directory is cleared and the configure argument
lookup fails. However, the original source directory still contains this
information.
During superblock generation, a JUMP_BACKWARD instruction is translated to either a JUMP_TO_TOP micro-op (when the target of the jump is exactly the beginning of the superblock, closing the loop), or a SAVE_IP + EXIT_TRACE pair, when the jump goes elsewhere.
The new JUMP_TO_TOP instruction includes a CHECK_EVAL_BREAKER() call, so a closed loop can still be interrupted.
- Hand-written uops JUMP_IF_{TRUE,FALSE}.
These peek at the top of the stack.
The jump target (in superblock space) is absolute.
- Hand-written translation for POP_JUMP_IF_{TRUE,FALSE},
assuming the jump is unlikely.
Once we implement jump-likelihood profiling,
we can implement the jump-unlikely case (in another PR).
- Tests (including some test cleanup).
- Improvements to len(ex) and ex[i] to expose the whole trace.
This adds several of unspecialized opcodes to superblocks:
TO_BOOL, BINARY_SUBSCR, STORE_SUBSCR,
UNPACK_SEQUENCE, LOAD_GLOBAL, LOAD_ATTR,
COMPARE_OP, BINARY_OP.
While we may not want that eventually, for now this helps finding bugs.
There is a rudimentary test checking for UNPACK_SEQUENCE.
Once we're ready to undo this, that would be simple:
just replace the call to variable_used_unspecialized
with a call to variable_used (as shown in a comment).
Or add individual opcdes to FORBIDDEN_NAMES_IN_UOPS.
Instead of special-casing specific instructions,
we add a few more special values to the 'size' field of expansions,
so in the future we can automatically handle
additional super-instructions in the generator.
- Tweak uops debugging output
- Fix the bug from gh-106290
- Rename `SET_IP` to `SAVE_IP` (per https://github.com/faster-cpython/ideas/issues/558)
- Add a `SAVE_IP` uop at the start of the trace (ditto)
- Allow `unbound_local_error`; this gives us uops for `LOAD_FAST_CHECK`, `LOAD_CLOSURE`, and `DELETE_FAST`
- Longer traces
- Support `STORE_FAST_LOAD_FAST`, `STORE_FAST_STORE_FAST`
- Add deps on pycore_uops.h to Makefile(.pre.in)
Annotate the following method signatures:
- state_dsl_start()
- state_parameter_docstring_start()
- state_parameters_start()
Inverting ignore_line() logic, add type hints (including type guard) to
it, and rename to valid_line().
Remove the "cpython/pytime.h" header file: it only contained private
functions. Move functions to the internal pycore_time.h header file.
Move tests from _testcapi to _testinternalcapi. Rename also test
methods to have the same name than tested C functions.
No longer export these functions:
* _PyTime_Add()
* _PyTime_As100Nanoseconds()
* _PyTime_FromMicrosecondsClamp()
* _PyTime_FromTimespec()
* _PyTime_FromTimeval()
* _PyTime_GetPerfCounterWithInfo()
* _PyTime_MulDiv()
- Establish global state struct
- Convert static types to heap types and add them to global state:
* PyDecContextManager_Type
* PyDecContext_Type
* PyDecSignalDictMixin_Type
* PyDec_Type
- Add to global state:
* PyDecSignalDict_Type
* DecimalTuple
Co-authored-by: Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>
Co-authored-by: Erlend E. Aasland <erlend@python.org>
This produces longer traces (superblocks?).
Also improved debug output (uop names are now printed instead of numeric opcodes). This would be simpler if the numeric opcode values were generated by generate_cases.py, but that's another project.
Refactored some code in generate_cases.py so the essential algorithm for cache effects is only run once. (Deciding which effects are used and what the total cache size is, regardless of what's used.)
Added a new, experimental, tracing optimizer and interpreter (a.k.a. "tier 2"). This currently pessimizes, so don't use yet -- this is infrastructure so we can experiment with optimizing passes. To enable it, pass ``-Xuops`` or set ``PYTHONUOPS=1``. To get debug output, set ``PYTHONUOPSDEBUG=N`` where ``N`` is a debug level (0-4, where 0 is no debug output and 4 is excessively verbose).
All of this code is likely to change dramatically before the 3.13 feature freeze. But this is a first step.
* Add table describing possible executable classes for out-of-process debuggers.
* Remove shim code object creation code as it is no longer needed.
* Make lltrace a bit more robust w.r.t. non-standard frames.
Remove compatibility code for Python 2 and early Python 3 versions.
* Remove os_fsencode() reimplementation: use os.fsencode() directly.
os.fsencode() was added to Python 3.2.
* Remove references to Python 2 and "Python 3": just say "Python".
* Remove outdated u'' string format: use '' instead.
This fixes a race during import. The existing _PyRuntimeState.imports.pkgcontext is shared between interpreters, and occasionally this would cause a crash when multiple interpreters were importing extensions modules at the same time. To solve this we add a thread-local variable for the value. We also leave the existing state (and infrequent race) in place for platforms that do not support thread-local variables.
For a while now, pending calls only run in the main thread (in the main interpreter). This PR changes things to allow any thread run a pending call, unless the pending call was explicitly added for the main thread to run.
The _xxsubinterpreters module was meant to only use public API. Some internal C-API usage snuck in over the last few years (e.g. gh-28969). This fixes that.
When I added the relevant condition to type_ready_set_bases() in gh-103912, I had missed that the function also sets tp_base and ob_type (if necessary). That led to problems for third-party static types.
We fix that here, by making those extra operations distinct and by adjusting the condition to be more specific.
Upgrade builds to OpenSSL 1.1.1u.
This OpenSSL version addresses a pile if less-urgent CVEs since 1.1.1t.
The Mac/BuildScript/build-installer.py was already updated.
Also updates _ssl_data_111.h from OpenSSL 1.1.1u, _ssl_data_300.h from 3.0.9, and adds a new _ssl_data_31.h file from 3.1.1 along with the ssl.c code to use it.
Manual edits to the _ssl_data_300.h file prevent it from removing any existing definitions in case those exist in some peoples builds and were important (avoiding regressions during backporting).
backports of this prior to 3.12 will not include the openssl 3.1 header.
* refcounts.dat:
* Remove Py_UNICODE functions.
* Replace Py_UNICODE argument type with wchar_t.
* _PyUnicode_ToLowercase(), _PyUnicode_ToUppercase(),
_PyUnicode_ToTitlecase() are no longer deprecated in comments.
It's no longer needed since they now use Py_UCS4 type, rather than
the deprecated Py_UNICODE type.
* gdb: Remove unused char_width() method.
* socket_helper.transient_internet() no longer imports nntplib to
catch nntplib.NNTPTemporaryError.
* ssltests.py no longer runs test_nntplib.
* "make quicktest" no longer runs test_nntplib.
* WASM: remove nntplib from OMIT_NETWORKING_FILES.
* Remove mentions to nntplib in the email documentation.
- Make some string interpolations more readable using f-strings or
explicit parametrisation
- Remove unneeded open() mode specifiers
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
The following local variables were assigned but never used:
- line 551: result
- line 1341: groups
- line 1431: default_return_converter
- line 1529: ignore_self
- line 1809: input_checksum
- line 4224: new'
---
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
For code readability. Instances of `builtins.dict` have been ordered since 3.6, and have been guaranteed by the language to be ordered since Python 3.7. Argument Clinic now requires Python 3.10+.
Annotate the following:
- methods of class Class
- methods of class Module
- methods of class PythonParser
- function compute_checksum()
- function parse_file()
- global variable unsupported_special_methods
- Convert `unspecified` and `unknown` to be members of a `Sentinels` enum, rather than instances of bespoke classes.
- An enum feels more idiomatic here, and works better with type checkers.
- Convert some `==` and `!=` checks for these values to identity checks, which are more idiomatic with sentinels.
- _Don't_ do the same for `Null`, as this needs to be a distinct type due to its usage in `clinic.py`.
- Use `object` as the annotation for `default` across `clinic.py`. `default` can be literally any object, so `object` is the correct annotation here.
---
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
Introduce TypeSet, and use it to annotate the 'accept' keyword of
various C converters. Also add some missing return annotations for
converter init functions.
* Add basic mypy workflow to CI
* Make the type check pass
---------
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
Co-authored-by: Nikita Sobolev <mail@sobolevn.me>
Co-authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
When monitoring LINE events, instrument all instructions that can have a predecessor on a different line.
Then check that the a new line has been hit in the instrumentation code.
This brings the behavior closer to that of 3.11, simplifying implementation and porting of tools.
Use the unused keyword param in the converter to explicitly
mark an argument as unused:
/*[clinic input]
SomeBaseClass.stubmethod
flag: bool(unused=True)
[clinic start generated code]*/
Replaces our built-in SHA3 implementation with a verified one from the HACL* project.
This implementation is used when OpenSSL does not provide SHA3 or is not present.
3.11 shiped with a very slow tiny sha3 implementation to get off of the <=3.10 reference implementation that wound up having serious bugs. This brings us back to a reasonably performing built-in implementation consistent with what we've just replaced our other guaranteed available standard hash algorithms with: code from the HACL* project.
---------
Co-authored-by: Gregory P. Smith <greg@krypto.org>
This is strictly about moving the "obmalloc" runtime state from
`_PyRuntimeState` to `PyInterpreterState`. Doing so improves isolation
between interpreters, specifically most of the memory (incl. objects)
allocated for each interpreter's use. This is important for a
per-interpreter GIL, but such isolation is valuable even without it.
FWIW, a per-interpreter obmalloc is the proverbial
canary-in-the-coalmine when it comes to the isolation of objects between
interpreters. Any object that leaks (unintentionally) to another
interpreter is highly likely to cause a crash (on debug builds at
least). That's a useful thing to know, relative to interpreter
isolation.
This PR makes three minor linting adjustments to the `wasm` module
caught by [ruff](https://github.com/charliermarsh/ruff).
<!-- gh-issue-number: gh-103801 -->
* Issue: gh-103801
<!-- /gh-issue-number -->
---------
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
This is the implementation of PEP683
Motivation:
The PR introduces the ability to immortalize instances in CPython which bypasses reference counting. Tagging objects as immortal allows up to skip certain operations when we know that the object will be around for the entire execution of the runtime.
Note that this by itself will bring a performance regression to the runtime due to the extra reference count checks. However, this brings the ability of having truly immutable objects that are useful in other contexts such as immutable data sharing between sub-interpreters.
Remove the bundled setuptools wheel from ensurepip, and stop installing setuptools in environments created by venv.
Co-Authored-by: Hugo van Kemenade <hugovk@users.noreply.github.com>
Co-authored-by: C.A.M. Gerlach <CAM.Gerlach@Gerlach.CAM>
Co-authored-by: Oleg Iarygin <oleg@arhadthedev.net>
* The majority of the monitoring code is in instrumentation.c
* The new instrumentation bytecodes are in bytecodes.c
* legacy_tracing.c adapts the new API to the old sys.setrace and sys.setprofile APIs
I've also added a small comment to `Tools/c-analyzer/cpython/_parser.py` to trigger the `patchcheck` CI. It must pass now.
Automerge-Triggered-By: GH:ericsnowcurrently
On content update, builds `python` and the docs. Also adds a Dockerfile that should include everything but autoconf 2.69 that's necessary to build CPython and the entire stdlib on Fedora.
Co-authored-by: Ronald Oussoren <ronaldoussoren@mac.com>
Co-authored-by: Dusty Phillips <dusty@phillips.codes>
We can revisit the options for keeping it global later, if desired. For now the approach seems quite complex, so we've gone with the simpler isolation solution in the meantime.
https://github.com/python/cpython/issues/100227
* Eliminate all remaining uses of Py_SIZE and Py_SET_SIZE on PyLongObject, adding asserts.
* Change layout of size/sign bits in longobject to support future addition of immortal ints and tagged medium ints.
* Add functions to hide some internals of long object, and for setting sign and digit count.
* Replace uses of IS_MEDIUM_VALUE macro with _PyLong_IsCompact().
The essentially eliminates the global variable, with the associated benefits. This is also a precursor to isolating this bit of state to PyInterpreterState.
Folks that currently read _Py_RefTotal directly would have to start using _Py_GetGlobalRefTotal() instead.
https://github.com/python/cpython/issues/102304
This behavior is optional, because in some extreme cases it
may just make debugging harder. The tool defaults it to off,
but it is on in Makefile.pre.in.
Also note that this makes diffs to generated_cases.c.h noisier,
since whenever you insert or delete a line in bytecodes.c,
all subsequent #line directives will change.
This will keep us from adding new unsupported (i.e. non-const) C global variables, which would break interpreter isolation.
FYI, historically it is very uncommon for new global variables to get added. Furthermore, it is rare for new code to break the c-analyzer. So the check should almost always pass unnoticed.
Note that I've removed test_check_c_globals. A test wasn't a great fit conceptually and was super slow on debug builds. A CI check is a better fit.
This also resolves gh-100237.
https://github.com/python/cpython/issues/81057
distutils was removed in November. However, the c-analyzer relies on it. To solve that here, we vendor the parts the tool needs so it can be run against 3.12+. (Also see gh-92584.)
Note that we may end up removing this code later in favor of a solution in common with the peg_generator tool (which also relies on distutils). At the least, the copy here makes sure the c-analyzer tool works on 3.12+ in the meantime.
Some incompatible changes had gone in, and the "ignore" lists weren't properly undated. This change fixes that. It's necessary prior to enabling test_check_c_globals, which I hope to do soon.
Note that this does include moving last_resort_memory_error to PyInterpreterState.
https://github.com/python/cpython/issues/90110
Prevent test_tools from copying 1000M of "source"
It doesn't need a git repo, just the checkout. We skip .git metadata, Doc/build, Doc/venv, and `__pycache__` subdirs, that developers often have in their clients to reduce the size of the source tree copy ten-fold.
This should significantly reduce IO and presumably time on buildbots during this long test.
* Write output and metadata in a single run
This halves the time to run the cases generator
(most of the time goes into parsing the input).
* Declare or define opcode metadata based on NEED_OPCODE_TABLES
* Use generated metadata for stack_effect()
* compile.o depends on opcode_metadata.h
* Return -1 from _PyOpcode_num_popped/pushed for unknown opcode
New generator feature: Generate useful glue for output arrays, so you can just write values to the output array (no bounds checking). Rewrote UNPACK_SEQUENCE_TWO_TUPLE to use this, and also UNPACK_SEQUENCE_{TUPLE,LIST}.
You can now write things like this:
```
inst(BUILD_STRING, (pieces[oparg] -- str)) { ... }
inst(LIST_APPEND, (list, unused[oparg-1], v -- list, unused[oparg-1])) { ... }
```
Note that array output effects are only partially supported (they must be named `unused` or correspond to an input effect).
For these the instr_format field uses IX instead of IB.
Register instructions use IX, IB, IBBX, IBBB, etc.
Also: Include the closing '}' in Block.tokens, for completeness
- This doesn't cover everything (far from it) but it's a start.
- This uses pytest, which isn't ideal, but was quickest to get started.
Co-authored-by: Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>
(These aren't used yet, but may be coming soon,
and it's easier to keep this tool the same between branches.)
Added a sanity check for all this to compile.c.
Co-authored-by: Irit Katriel <iritkatriel@yahoo.com>
The presence of this macro indicates that a particular instruction
may be considered for conversion to a register-based format
(see https://github.com/faster-cpython/ideas/issues/485).
An invariant (currently unchecked) is that `DEOPT_IF()` may only
occur *before* `DECREF_INPUTS()`, and `ERROR_IF()` may only occur
*after* it. One reason not to check this is that there are a few
places where we insert *two* `DECREF_INPUTS()` calls, in different
branches of the code. The invariant checking would have to be able
to do some flow control analysis to understand this.
Note that many instructions, especially specialized ones,
can't be converted to use this macro straightforwardly.
This is because the generator currently only generates plain
`Py_DECREF(variable)` statements, and cannot generate
things like `_Py_DECREF_SPECIALIZED()` let alone deal with
`_PyList_AppendTakeRef()`.
We can't move it to _PyRuntimeState because the symbol is exposed in the stable ABI. We'll have to sort that out before a per-interpreter GIL, but it shouldn't be too hard.
https://github.com/python/cpython/issues/81057
Stack effects can now have a type, e.g. `inst(X, (left, right -- jump/uint64_t)) { ... }`.
Instructions converted to the non-legacy format:
* COMPARE_OP
* COMPARE_OP_FLOAT_JUMP
* COMPARE_OP_INT_JUMP
* COMPARE_OP_STR_JUMP
* STORE_ATTR
* DELETE_ATTR
* STORE_GLOBAL
* STORE_ATTR_INSTANCE_VALUE
* STORE_ATTR_WITH_HINT
* STORE_ATTR_SLOT, and complete the store_attr family
* Complete the store_subscr family: STORE_SUBSCR{,DICT,LIST_INT}
(STORE_SUBSCR was alread half converted,
but wasn't using cache effects yet.)
* DELETE_SUBSCR
* PRINT_EXPR
* INTERPRETER_EXIT (a bit weird, ends in return)
* RETURN_VALUE
* GET_AITER (had to restructure it some)
The original had mysterious `SET_TOP(NULL)` before `goto error`.
I assume those just account for `obj` having been decref'ed,
so I got rid of them in favor of the cleanup implied by `ERROR_IF()`.
* LIST_APPEND (a bit unhappy with it)
* SET_ADD (also a bit unhappy with it)
Various other improvements/refactorings as well.
Newly supported interpreter definition syntax:
- `op(NAME, (input_stack_effects -- output_stack_effects)) { ... }`
- `macro(NAME) = OP1 + OP2;`
Also some other random improvements:
- Convert `WITH_EXCEPT_START` to use stack effects
- Fix lexer to balk at unrecognized characters, e.g. `@`
- Fix moved output names; support object pointers in cache
- Introduce `error()` method to print errors
- Introduce read_uint16(p) as equivalent to `*p`
Co-authored-by: Brandt Bucher <brandtbucher@gmail.com>
This is part of the effort to consolidate global variables, to make them easier to manage (and make it easier to later move some of them to PyInterpreterState).
https://github.com/python/cpython/issues/81057
We actually don't move PyImport_Inittab. Instead, we make a copy that we keep on _PyRuntimeState and use only that after Py_Initialize(). We also prevent folks from modifying PyImport_Inittab (the best we can) after that point.
https://github.com/python/cpython/issues/81057
The global allocators were stored in 3 static global variables: _PyMem_Raw, _PyMem, and _PyObject. State for the "small block" allocator was stored in another 13. That makes a total of 16 global variables. We are moving all 16 to the _PyRuntimeState struct as part of the work for gh-81057. (If PEP 684 is accepted then we will follow up by moving them all to PyInterpreterState.)
https://github.com/python/cpython/issues/81057
As we consolidate global variables, we find some objects that are almost suitable to add to _PyRuntimeState.global_objects, but have some small/sneaky bit of per-interpreter state (e.g. a weakref list). We're adding PyInterpreterState.static_objects so we can move such objects there. (We'll removed the _not_used field once we've added others.)
https://github.com/python/cpython/issues/81057
Up until now we had a single generated initializer macro for all the statically declared global objects in _PyRuntimeState, including several one-offs (e.g. the empty tuple). The one-offs don't need to be generated, but were because we had one big initializer. Having separate initializers for set of generated global objects allows us to generate only the ones we need to. This allows us to add initializers for one-off global objects without having to generate them.
https://github.com/python/cpython/issues/81057
Alex Waygood
Erlend E. Aasland
Irit Katriel
Charlie Zhao
Eric Snow
Kumar Aditya
Pablo Galindo Salgado
Guido van Rossum
Victor Stinner
Brandt Bucher
Dong-hee Na
Nikita Sobolev
Kevin Diem
Mark Shannon
Ijtaba Hussain
Eisuke Kawashima
dependabot[bot]
Kirill Podoprigora
YAMAMOTO Takashi
Brett Cannon
Gregory P. Smith
Lysandros Nikolaou
Steve Dower
Petr Viktorin
Zachary Ware
Erlend E. Aasland
gsallam
Jelle Zijlstra
Kumar Aditya
Carl Meyer
penguin_wwy
Hugo van Kemenade
Jonathan Protzenko
Tian Gao
Juhi Chandalia
Barry Warsaw
Yichen Yan
Daniel Versoza
Eddie Elizondo
Pradyun Gedam
Benjamin Peterson
Oleg Iarygin
Missoupro
JosephSBoyle
Jacob Bower
Kushal Das
Zac Hatfield-Dodds
Eli Schwartz
Illia Volochii
Michael Droettboom
Shantanu
colorfulappl
Ikko Ashimine