ardupilot/ArduPlane
Andrew Tridgell 2af69b7131 Plane: make batter failsafe docs clearer 2013-11-09 18:14:02 +11:00
..
APM_Config.h Plane: removed HIL_MODE_ATTITUDE 2013-04-12 17:44:40 +10:00
APM_Config.h.reference Plane: updates for new compass API 2013-05-02 12:48:14 +10:00
ArduPlane.pde Plane: allow changing of loiter direction while loitering 2013-11-07 11:54:28 +11:00
Attitude.pde Plane: prevent too large combined pitch/roll angles 2013-11-04 21:21:42 +11:00
GCS.h Plane: switch to an array for stream rates 2013-02-05 08:20:41 +11:00
GCS_Mavlink.pde Plane: send firmware and git version in tlog 2013-11-09 10:09:20 +11:00
Log.pde Plane: send firmware and git version in tlog 2013-11-09 10:09:20 +11:00
Makefile Plane: cleanup cruft in Makefile 2013-10-13 21:41:01 +11:00
Parameters.h Plane: added RALLY_LIMIT_KM 2013-10-06 14:51:13 +11:00
Parameters.pde Plane: make batter failsafe docs clearer 2013-11-09 18:14:02 +11:00
climb_rate.pde uncrustify ArduPlane/climb_rate.pde 2012-08-21 18:57:21 -07:00
command_description.txt Cleanup: rename files with spaces in their names, replace with underscores 2012-02-28 16:14:31 -08:00
commands.pde Plane: auto-update home and baro calibration when disarmed 2013-10-05 18:45:45 +10:00
commands_logic.pde Plane: support MAV_CMD_DO_SET_CAM_TRIGG_DIST 2013-10-11 21:37:27 +11:00
commands_process.pde Plane: fixed setting of waypoint when not in AUTO 2013-10-23 09:40:41 +11:00
compat.h ArduPlane: Ported to AP_HAL 2012-12-20 14:51:36 +11:00
compat.pde Plane: removed some compat code 2013-09-30 21:06:43 +10:00
config.h Plane: send firmware and git version in tlog 2013-11-09 10:09:20 +11:00
control_modes.pde Plane: don't read control switch when ch3 is in failsafe 2013-07-22 12:50:00 +10:00
createTags imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00
defines.h Plane: added MAVLink SYSTEM_TIME message 2013-10-24 14:22:47 +11:00
events.pde Plane: integrate BattMonitor 2013-10-03 11:16:08 +09:00
failsafe.pde Plane: updates for AP_HAL::MemberProc 2013-09-30 21:06:43 +10:00
geofence.pde Plane: use the projected position for geofencing and waypoints 2013-09-17 21:05:25 +10:00
navigation.pde Plane: use G_Dt for acro angle integration 2013-10-12 13:30:27 +11:00
nocore.inoflag ArduPlane: Ported to AP_HAL 2012-12-20 14:51:36 +11:00
radio.pde Plane: use G_Dt for acro angle integration 2013-10-12 13:30:27 +11:00
rally.pde Plane: fixed rally altitude to be in meters 2013-10-14 16:38:40 +11:00
sensors.pde Plane: batt curr and remaining should be int16 2013-10-03 11:16:26 +09:00
setup.pde Plane: added GROUND_STEER_ALT and GROUND_STEER_DPS 2013-10-05 07:46:27 +10:00
system.pde Plane: send firmware and git version in tlog 2013-11-09 10:09:20 +11:00
test.pde Plane: use G_Dt for acro angle integration 2013-10-12 13:30:27 +11:00