Randy Mackay a76e2ab02e Plane: reserve NavEKF slot in param list even when not used ... Although this wasn't a problem immediatley, if someone had added a parameter after k_param_NavEKF it's position in eeprom could have moved as AP_AHRS_NAVEKF_AVAILABLE was enabled/disabled		2014-02-21 13:53:05 +09:00
..
APM_Config.h	Plane: removed HIL_MODE_ATTITUDE	2013-04-12 17:44:40 +10:00
APM_Config.h.reference	Plane: cleanup HIL defines	2014-02-15 05:29:46 +11:00
ArduPlane.pde	Plane: use ahrs.get_armed()	2014-02-19 10:53:26 +11:00
Attitude.pde	Plane: allow FLAP_IN_CHANNEL to control k_flap and k_flap_auto too	2014-02-06 14:09:49 +11:00
climb_rate.pde	uncrustify ArduPlane/climb_rate.pde	2012-08-21 18:57:21 -07:00
command_description.txt	Cleanup: rename files with spaces in their names, replace with underscores	2012-02-28 16:14:31 -08:00
commands_logic.pde	Plane: use a const reference for home	2014-02-15 05:48:15 +11:00
commands_process.pde	Plane: only log when armed by default	2014-01-14 13:07:43 +11:00
commands.pde	Plane: use a const reference for home	2014-02-15 05:48:15 +11:00
compat.h	ArduPlane: Ported to AP_HAL	2012-12-20 14:51:36 +11:00
compat.pde	Plane: removed some compat code	2013-09-30 21:06:43 +10:00
config.h	Plane: default LOG_BITMASK to 32767 on non-APM	2013-12-31 10:28:38 +11:00
control_modes.pde	Plane: allow for a wider range of values on the control switch	2014-02-17 13:58:11 +11:00
createTags	imported ArduPlane from ArduPilotMega svn	2011-09-09 11:29:39 +10:00
defines.h	Plane: removed extra log enum	2014-02-15 05:48:23 +11:00
events.pde	Plane: use AP_ServoRelayEvents library	2014-01-20 17:06:29 +11:00
failsafe.pde	Plane: allow FLAP_IN_CHANNEL to control k_flap and k_flap_auto too	2014-02-06 14:09:49 +11:00
GCS_Mavlink.pde	Plane: use ahrs.get_armed()	2014-02-19 10:53:26 +11:00
geofence.pde	Plane: use a const reference for home	2014-02-15 05:48:15 +11:00
Log.pde	Plane: removed duplicate log description	2014-02-15 05:48:24 +11:00
Makefile	Plane: cleanup cruft in Makefile	2013-10-13 21:41:01 +11:00
navigation.pde	Plane: use a const reference for home	2014-02-15 05:48:15 +11:00
nocore.inoflag	ArduPlane: Ported to AP_HAL	2012-12-20 14:51:36 +11:00
Parameters.h	Plane: reserve NavEKF slot in param list even when not used	2014-02-21 13:53:05 +09:00
Parameters.pde	Plane: fixed Log when disarmed value in docs	2014-02-19 19:01:48 +11:00
radio.pde	Plane: use new RC_Channels API	2014-02-06 10:17:16 +11:00
rally.pde	Plane: use a const reference for home	2014-02-15 05:48:15 +11:00
sensors.pde	Plane: updates for AHRS holding home position	2014-02-15 05:29:47 +11:00
setup.pde	Plane: replace APM with board in cli	2013-12-28 10:42:30 +09:00
system.pde	Plane: use ahrs.get_armed()	2014-02-19 10:53:26 +11:00
test.pde	Plane: change to Compass::learn_offsets	2014-02-16 13:22:06 +11:00