ardupilot/ArduCopter
Randy Mackay a5ea9420c0 Copter: landing gear position set less often
This change means no pwm output is sent to the landing gear servos until the pilot has moved the switch
2017-06-13 13:56:07 +09:00
..
.gitignore Improvements to cmake. 2011-09-29 21:23:26 -04:00
APM_Config.h Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
APM_Config_mavlink_hil.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
AP_Arming.cpp Copter: modify pre-arm check wording 2017-03-25 10:50:58 +09:00
AP_Arming.h Copter: AP_Arming calls parent's gps checks 2017-03-13 11:31:51 +11:00
AP_Rally.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
AP_Rally.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
AP_State.cpp Copter: Add SuperSimpleMode "2" to Simple Mode setting. 2017-05-08 09:31:23 +09:00
ArduCopter.cpp Copter: compass set-initial-location uses ahrs location 2017-06-07 13:01:38 +09:00
Attitude.cpp Copter: remove unused desired_climb_rate variable 2017-03-09 19:52:58 +11:00
Copter.cpp Copter: remove unused desired_climb_rate variable 2017-03-09 19:52:58 +11:00
Copter.h ArduCopter: change rangefinder msg for common one 2017-06-08 01:31:43 +01:00
GCS_Mavlink.cpp GCS_Common: rename send_rangefinder to send_rangefinder_downward 2017-06-08 01:32:04 +01:00
GCS_Mavlink.h Copter: update sensor status error flags independently of sending a sys_status message 2016-10-28 10:03:38 +11:00
Log.cpp Copter: StartUnstartedLogging replaces logging_started/start_logging 2017-06-11 20:34:12 +01:00
Makefile ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk) 2013-01-09 13:15:38 -08:00
Makefile.waf waf: use single entry point for make wrappers 2015-12-10 10:40:34 +09:00
Parameters.cpp Copter: Improve the PWM parameters descriptions 2017-06-06 11:06:26 +10:00
Parameters.h Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Parameters.pde Copter: added blank Parameters.pde for MissionPlanner 2015-05-30 15:21:31 +09:00
ReleaseNotes.txt Copter: update AC3.5.0-rc7 release notes 2017-05-25 13:29:35 +09:00
UserCode.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
UserVariables.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
afs_copter.cpp Copter: correct advance failsafe 2017-01-31 11:22:54 +09:00
afs_copter.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
avoidance_adsb.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
avoidance_adsb.h Copter: add new avoidance recovery modes 2016-08-17 22:38:54 -07:00
baro_ground_effect.cpp Copter: fix float warning; get_velocity_z() returns float 2017-01-17 09:41:37 -08:00
capabilities.cpp Copter: add compass cal capability bit 2016-12-04 19:17:01 -08:00
commands.cpp Copter: compass set-initial-location uses ahrs location 2017-06-07 13:01:38 +09:00
commands_logic.cpp Copter: consolidate set_home functions 2017-06-07 13:01:38 +09:00
compassmot.cpp Copter: fix compassmot for oneshot ESCs 2017-05-23 13:11:46 +09:00
compat.cpp Copter: use millis/micros/panic functions 2015-11-20 12:26:31 +09:00
config.h Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
control_acro.cpp Copter: sport and acro trainer limits based on target attitude 2017-05-23 19:44:52 +09:00
control_althold.cpp Copter: use avoidance adjusted climb rate in all modes 2017-01-18 09:35:47 +09:00
control_auto.cpp Copter: auto loiter initialisation simplified 2017-04-28 09:10:02 +09:00
control_autotune.cpp Copter: adjust autotune poshold 2017-05-23 09:41:11 +09:00
control_avoid_adsb.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
control_brake.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
control_circle.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
control_drift.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
control_flip.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
control_guided.cpp Copter: guided init uses vertical stopping point 2017-04-27 14:36:23 +09:00
control_guided_nogps.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
control_land.cpp Copter: remove unused desired_climb_rate variable 2017-03-09 19:52:58 +11:00
control_loiter.cpp Copter: remove const qualifier from do_precision_loiter 2017-03-29 14:06:12 +09:00
control_poshold.cpp Copter: use avoidance adjusted climb rate in all modes 2017-01-18 09:35:47 +09:00
control_rtl.cpp Copter: rtl initialises wp controller earlier 2017-04-28 09:10:02 +09:00
control_sport.cpp Copter: sport and acro trainer limits based on target attitude 2017-05-23 19:44:52 +09:00
control_stabilize.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
control_throw.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
crash_check.cpp Copter: landing gear position set less often 2017-06-13 13:56:07 +09:00
defines.h Copter: moved beacon logging to dataflash 2017-04-22 10:55:08 +09:00
ekf_check.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
esc_calibration.cpp Copter: fix esc calibration for one-shot 2017-05-23 07:57:17 +09:00
events.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
failsafe.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
fence.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
flight_mode.cpp Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
heli.cpp Copter: use only downward facing rangefinder 2017-02-27 15:18:16 +09:00
heli_control_acro.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
heli_control_stabilize.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
inertia.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
land_detector.cpp Copter: integrate attitude control's set-throttle-mix-manual 2017-01-17 14:19:16 +09:00
landing_gear.cpp Copter: landing gear position set less often 2017-06-13 13:56:07 +09:00
leds.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
make.inc Copter: removed AP_Airspeed from vehicle code 2017-05-04 22:59:02 -07:00
motor_test.cpp Copter: do not allow motor test before initialisation completes 2017-04-18 09:29:53 +09:00
motors.cpp Copter: eliminate calls to manipulate _writes_enabled 2017-06-11 20:34:12 +01:00
navigation.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
perf_info.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
position_vector.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
precision_landing.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
radio.cpp Copter: increase RC input deadzones for roll pitch and yaw 2017-06-01 10:10:57 +09:00
sensors.cpp Copter: compass set-initial-location uses ahrs location 2017-06-07 13:01:38 +09:00
setup.cpp Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
switches.cpp Copter: landing gear position set less often 2017-06-13 13:56:07 +09:00
system.cpp Copter: StartUnstartedLogging replaces logging_started/start_logging 2017-06-11 20:34:12 +01:00
takeoff.cpp Copter: combined tri, single, coax and multicopter into a single build 2017-01-12 17:39:37 +11:00
terrain.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
test.cpp Copter: use only downward facing rangefinder 2017-02-27 15:18:16 +09:00
tuning.cpp Copter: adjust for change to AC_PID 2017-01-12 17:39:37 +11:00
version.h Copter: version to 3.6-dev 2017-03-30 08:19:18 +09:00
wscript Copter: add AP_VisualOdom to build 2017-04-19 11:04:40 +09:00