.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: rename hybrid to poshold
|
2014-07-11 14:09:01 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
AP_State.pde
|
Copter: replace takeoff_complete with landed_complete
|
2014-02-15 05:27:43 +11:00 |
ArduCopter.pde
|
Copter: AC3.2-rc3 version and release notes
|
2014-07-11 14:18:48 +09:00 |
Attitude.pde
|
Copter: Improve surface tracking dynamics
|
2014-06-06 15:32:49 +09:00 |
GCS_Mavlink.pde
|
Copter: changes for more common mavlink code
|
2014-07-13 15:37:50 +10:00 |
Log.pde
|
Copter: remove log CLI code when CLI disabled
|
2014-07-08 14:28:19 +10:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: rename hybrid to poshold
|
2014-07-11 14:09:01 +09:00 |
Parameters.pde
|
Copter: fixed typos in parameter markup
|
2014-07-12 11:26:15 +10:00 |
ReleaseNotes.txt
|
Copter: AC3.2-rc3 version and release notes
|
2014-07-11 14:18:48 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
commands.pde
|
Copter: bug fix to remove home variable
|
2014-06-11 12:01:48 +09:00 |
commands_logic.pde
|
Copter: DO_SET_ROI accepted outside missions
|
2014-07-06 17:02:06 +09:00 |
compassmot.pde
|
Copter: consider health of primary compass in SYS_STATUS, pre-arm and compassmot
|
2014-03-24 19:52:08 +11:00 |
compat.h
|
Copter: remove unused HIGH, LOW definitions
|
2014-05-09 16:35:21 +09:00 |
compat.pde
|
Copter: remove unused compat.pde entries
|
2014-01-30 14:33:55 +09:00 |
config.h
|
Copter: rename hybrid to poshold
|
2014-07-11 14:09:01 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_acro.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_althold.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_auto.pde
|
Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents
|
2014-07-06 19:20:25 +09:00 |
control_autotune.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_circle.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_drift.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_flip.pde
|
Copter: flip records starting attitude
|
2014-06-10 20:02:32 +09:00 |
control_guided.pde
|
Copter: guided reset yaw only when initialised
|
2014-07-06 17:02:13 +09:00 |
control_land.pde
|
Copter: fixed apm1-hil build
|
2014-07-08 15:41:39 +10:00 |
control_loiter.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_modes.pde
|
Copter: Ch7/8 option to retract mount
|
2014-07-10 13:03:28 +09:00 |
control_ofloiter.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_poshold.pde
|
Copter: rename control_hybrid to poshold
|
2014-07-11 14:06:53 +09:00 |
control_rtl.pde
|
Copter: Add parameter LAND_REPOSITION to enable/disable user input during auto-mode landings and descents
|
2014-07-06 19:20:25 +09:00 |
control_sport.pde
|
Copter: integrate AttControl's set_yaw_target_to_current_heading
|
2014-06-10 20:02:51 +09:00 |
control_stabilize.pde
|
Copter: Don't use land detector to stop stabilizing in stabilize
|
2014-07-08 19:41:41 +09:00 |
crash_check.pde
|
Copter: check parachute is enabled before manual_release
|
2014-04-07 13:37:15 +09:00 |
defines.h
|
Copter: rename hybrid to poshold
|
2014-07-11 14:09:01 +09:00 |
events.pde
|
Copter: rename hybrid to poshold
|
2014-07-11 14:09:01 +09:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: remove unused variables from fence.pde
|
2014-04-27 11:11:12 +09:00 |
flight_mode.pde
|
Copter: rename hybrid to poshold
|
2014-07-11 14:09:01 +09:00 |
heli.h
|
TradHeli: Add Heli.h file
|
2014-07-08 20:18:10 +09:00 |
heli.pde
|
TradHeli: Set main loop rate time in motors class.
|
2014-07-08 20:18:24 +09:00 |
heli_control_acro.pde
|
TradHeli: Change behavior of Acro and Stabilize modes when disarmed. Servos should move realistically for testing when disarmed.
|
2014-07-08 20:18:32 +09:00 |
heli_control_stabilize.pde
|
TradHeli: Change behavior of Acro and Stabilize modes when disarmed. Servos should move realistically for testing when disarmed.
|
2014-07-08 20:18:32 +09:00 |
inertia.pde
|
Copter: flag current alt as relative
|
2014-06-17 14:11:42 +10:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motor_test.pde
|
Copter: remove meaningless check from motor_test
|
2014-05-09 13:48:44 +09:00 |
motors.pde
|
Copter: set UARTs non-blocking at end of initialisation
|
2014-07-11 15:27:29 +09:00 |
navigation.pde
|
Copter: bug fix for conditional_distance command
|
2014-04-17 22:23:28 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
Copter: bug fix display of PerfMon log's num long loops
|
2014-03-08 15:17:03 +09:00 |
position_vector.pde
|
Copter: restore pv_get_horizontal_distance_cm function
|
2014-07-06 17:01:05 +09:00 |
radio.pde
|
Copter: setting ESC param to 2 skips high throttle check
|
2014-07-09 13:25:08 +09:00 |
readme.txt
|
Copter: readme file renamed and directs to wiki
|
2014-02-12 21:03:45 +09:00 |
sensors.pde
|
Copter: convert to new AP_RangeFinder API
|
2014-07-08 15:08:18 +10:00 |
setup.pde
|
Copter: convert to new AP_RangeFinder API
|
2014-07-08 15:08:18 +10:00 |
system.pde
|
Copter: set UARTs non-blocking at end of initialisation
|
2014-07-11 15:27:29 +09:00 |
test.pde
|
Copter: convert to new AP_RangeFinder API
|
2014-07-08 15:08:18 +10:00 |