Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
12,719 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

3253 Commits

Author SHA1 Message Date
akdslr dc67058771 ArduCopter: Removed CONFIG_SONAR_SOURCE, SONAR_SOURCE_ADC, and SONAR_SOURCE_ANALOG_PIN since no longer used 2014-07-24 14:41:55 +10:00
akdslr 06fa2e3f60 ArduCopter test: Renamed the test from sonar to rangefinder and added info on all devices 2014-07-24 14:41:55 +10:00
akdslr 1354cd7120 ArduCopter Parameters: Changed the SONAR prefix to RNGFND, renamed SONAR_GAIN, and CH6-8 value descriptions 2014-07-24 14:41:54 +10:00
Supergoldfish 13563f4344 Copter: added Sonar Voltage reporting to GCS mavlink 
Rangefinder class will return 0 if not applicable.
 2014-07-23 20:57:36 +09:00
Randy Mackay e9861de2ac Copter: fix to drift's yaw rate 
The ACRO_P parameter needs to be multiplied by the roll and pitch
velocities to calculate the final yaw rate
 2014-07-23 17:13:08 +09:00
Randy Mackay 7bda6cbadf Copter: integrate EKF check 
Check runs at 10hz
Log ekf check failures and ekd failsafes
 2014-07-22 23:13:25 +09:00
Randy Mackay a4a4334b13 Copter: add EKFCHECK_COMPASS parameter 2014-07-22 23:13:22 +09:00
Randy Mackay 65bc498d4e Copter: add ekf check of compass 
Checks the EKF's compass variance or the inertial navigations x and y
acceleration corrections
 2014-07-22 23:13:20 +09:00
Randy Mackay eb696e247b Copter: CLI report_compass prints results for all compasses 2014-07-22 22:01:25 +09:00
Randy Mackay 3c702e5fc5 Copter: compass mot configures all compasses 2014-07-22 22:01:24 +09:00
Randy Mackay af28270669 Copter: bug fix for throttle failsafe 
Missing bracket could cause throttle failsafe to be triggered even when
disabled or motors disarmed
 2014-07-21 20:58:16 +09:00
lthall 9202149fb1 Copter: integrate pre-takeoff throttle feedback 
This feature slightly revs the motors in response to the pilot's input
before takeoff AltHold, Loiter, AutoTune, PosHold and Sport flight modes

pair-programmed with Randy Mackay
 2014-07-18 11:41:50 +09:00
Randy Mackay 11678ba936 Copter: remain landed until throttle output above 25 percent 2014-07-18 11:41:46 +09:00
lthall edd7334544 Copter: add pre_takeoff throttle feedback 
pair-programmed with Randy Mackay
 2014-07-18 11:41:28 +09:00
Randy Mackay e339149044 Copter: update AC3.2-rc3 ReleaseNotes yet again 2014-07-17 14:27:03 +09:00
Randy Mackay 73fcfbd174 Copter: add no-break to case to resolve compiler warning 
This also helps kick off the auto builder for AC3.2-rc3
 2014-07-17 12:10:45 +09:00
Randy Mackay eb762bc890 Copter: update AC3.2-rc3 Release Notes 2014-07-17 11:52:07 +09:00
Randy Mackay df28db1361 Copter: minor formatting update 2014-07-17 11:49:38 +09:00
Craig Elder 07d43534c1 Copter: Change Radio Failsafe Timeout 
Change Radio Failsafe Timeout from 2 seconds to 200ms
 2014-07-16 19:41:43 -07:00
Craig Elder 3c9c943b67 Copter: Change Radio Failsafe Timeout 
Change Radio Failsafe Timeout from 2 seconds to 200ms
 2014-07-16 11:03:29 -07:00
Craig Elder e85c9f078d Copter: Change Radio Failsafe Timeout 
Change Radio Failsafe Timeout from 2 seconds to 200ms
 2014-07-16 11:02:32 -07:00
Randy Mackay 34984cc2d1 Copter: update AC3.2-rc3 Release Notes 2014-07-16 17:55:04 +09:00
Jonathan Challinger fc34a2fed1 Copter: updated AttitudeControl ctor call to reflect changes 2014-07-16 14:40:58 +09:00
Randy Mackay b6ef3dc5d7 Copter: add parenthesis around ntun log bitmask 
Resolves one compiler warning
 2014-07-16 14:40:45 +09:00
bugobliterator 2fd165d023 Copter: Add esc_calib to as an app in cli 
Usage Notes:
- when in cli mode select setup
- inside setup use esc_calib <chan_mask> to launch esc calibration
  e.g. esc_calib 1010 : enable calibration for Motor 2 and Motor 4
 2014-07-14 09:44:36 +10:00
Andrew Tridgell 49954a3a61 Copter: use sensors from board subtypes 2014-07-14 09:44:35 +10:00
Andrew Tridgell fa4abdb0ae Copter: added support for MPU9250 2014-07-14 09:44:34 +10:00
Robert Lefebvre 022425584b TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM. 2014-07-13 17:11:30 +09:00
Robert Lefebvre 4b9aea2c55 Parameters: Update Tune Comments with new options 2014-07-13 17:11:27 +09:00
Robert Lefebvre aff98e34e5 TradHeli: Force recalc scalers after setting main loop time in MotorsHeli so that ramp scalers are right for 32-bit. 2014-07-13 17:11:25 +09:00
lthall f53181ec66 Copter: Acro balance fix 2014-07-13 15:51:49 +09:00
Andrew Tridgell 71d2333ea8 Copter: changes for more common mavlink code 2014-07-13 15:37:50 +10:00
Andrew Tridgell 28f251005b Copter: fixed typos in parameter markup 2014-07-12 11:26:15 +10:00
Randy Mackay 7f9cd20377 Copter: set UARTs non-blocking at end of initialisation 
Previously we were setting to non-block after arming but this reduce the
chance of bumping into a NuttX USB driver issue that can cause the uart
to become unresponsive and also makes Copter consistent with Plane
 2014-07-11 15:27:29 +09:00
Randy Mackay 34bc136a6c Copter: AC3.2-rc3 version and release notes 2014-07-11 14:18:48 +09:00
Randy Mackay 65e5367619 Copter: rename hybrid to poshold 2014-07-11 14:09:01 +09:00
Randy Mackay 0fc73a0a21 Copter: rename control_hybrid to poshold 2014-07-11 14:06:53 +09:00
Randy Mackay b565d43d5d Copter: PREFLIGHT_SET_SENSOR_OFFSETS used to set compass offsets 
remove deprecated ardupilot specific SET_MAG_OFFSETS
 2014-07-10 20:25:18 +09:00
Randy Mackay 2c085c300d Copter: only save compass offsets when learning is on 2014-07-10 20:25:16 +09:00
Randy Mackay b799020e25 Copter: pre-arm check uses compass configured method 2014-07-10 20:24:53 +09:00
svefro e892b4cd04 Copter: Ch7/8 option to retract mount 
-Define AUX_SWITCH_RETRACT_MOUNT in defines.h
-Added 27=Retract Mount to Parameters.pde CH7 and CH8
-added int on CH7/8opt AUX_SWITCH_RETRACT_MOUNT
-Added Case #if Mount == ENABLE to set mount mode
made set_mode public in AP_Mount.h lib
 2014-07-10 13:03:28 +09:00
Randy Mackay e1a6b07e60 Copter: setting ESC param to 2 skips high throttle check 
This allows the all-at-once ESC calibration to be performed on a setup
in which the RC input takes some time to come online.
 2014-07-09 13:25:08 +09:00
Robert Lefebvre 4b5167e529 TradHeli: Change behavior of Acro and Stabilize modes when disarmed. Servos should move realistically for testing when disarmed. 2014-07-08 20:18:32 +09:00
Robert Lefebvre 5b13b2b3da TradHeli: Stabilize mode should use get_pilot_desired_collective, not get_pilot_desired_throttle. 2014-07-08 20:18:29 +09:00
Robert Lefebvre 032f321348 TradHeli: Acro mode uses full collective range. 2014-07-08 20:18:27 +09:00
Robert Lefebvre c7ccd22d96 TradHeli: Set main loop rate time in motors class. 2014-07-08 20:18:24 +09:00
Robert Lefebvre 7ef4c11c92 TradHeli: Initialize Rate FF filters. 2014-07-08 20:18:16 +09:00
Robert Lefebvre 8eb557d1e0 TradHeli: Add Heli.h file 2014-07-08 20:18:10 +09:00
Robert Lefebvre 1f422c86c1 Arducopter: Add independent rate roll and pitch P, I, D tuning options. Add rate feedforward tuning options for tradheli. 2014-07-08 20:18:08 +09:00
Robert Lefebvre 08e135151a TradHeli: Add Mode Filter on RC8 input for RSC Controller. 2014-07-08 20:18:00 +09:00