Commit Graph

5686 Commits

Author SHA1 Message Date
Peter Barker f4be542169 Copter: autotune: raise priorities of autotune success and param saved
Closes #8734
2018-06-30 11:40:39 +09:00
Lucas De Marchi 1a45aa12f5 AP_Param: warn on last pass only about unknown parameters
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
Lucas De Marchi 7f0d5ddf21 AP_Param: stop panic()'ing on unknown parameters
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.

On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.

This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Peter Barker 81b731b214 Copter: move copter-specific AP_Arming code into Copter subclass 2018-06-28 12:48:31 +10:00
Andrew Tridgell 20dea6df45 Copter: moved OSD to top level params
this gives us plenty of param depth for a complex param tree
2018-06-27 14:55:00 +10:00
Alexander Malishev f63b3c044a Copter: added OSD support 2018-06-27 14:55:00 +10:00
Peter Barker 724f34c7e7 Copter: use MAV_SYS_STATUS_SENSOR_PROXIMITY for proximity sensor
Copter: correct laser sensor health bits
2018-06-26 10:25:28 +10:00
Peter Barker a7a6cfa99f Copter: correct comment 2018-06-26 10:25:28 +10:00
Peter Barker ff17c78c67 Copter: create Copter::Mode::_TakeOff subobject from takeoff_state 2018-06-26 09:11:21 +09:00
Peter Barker 7883582c65 Copter: move takeoff state into Mode class 2018-06-26 09:11:21 +09:00
Peter Barker 597e876953 Copter: clean up do_user_takeoff 2018-06-26 09:11:21 +09:00
Peter Barker cff1969a29 Copter: make do_user_takeoff a member of Mode 2018-06-26 09:11:21 +09:00
Peter Barker cb26ff64b3 Copter: current_mode_has_user_takeoff -> Mode::has_user_takeoff 2018-06-26 09:11:21 +09:00
Peter Barker 70d159cb38 Copter: raise EKF failure even if USB is connected
This will let EKF go bad if your PixHawk is connected to your laptop.
This doesn't seem to be a problem for the other vehicles.

This also allows the EKF to go bad in-flight if you happen to have
connected (against AP's recommendations) your companion computer to your
flight controller via USB.  Since people do this, it is better to have
the checks than not.
2018-06-26 10:07:55 +10:00
Pierre Kancir 2d5cbd2cf8 ArduCopter: report crosstrack_error 2018-06-26 08:42:14 +09:00
Peter Barker 291102360a Copter: use check_failed function 2018-06-23 15:33:19 +10:00
Andrew Tridgell b43316d743 Copter: added ESC_TELEMETRY to mavlink streams 2018-06-21 10:48:02 +10:00
Peter Barker ca8a1ae488 Copter: use magic force arm/disarm definitions 2018-06-20 11:43:38 +10:00
Peter Barker fd9ce90b8e Copter: option to force arm, bypassing checks 2018-06-20 11:43:38 +10:00
Peter Barker 4d6408857f Copter: return appropriate response to failed disarm 2018-06-20 11:43:38 +10:00
Peter Barker 485cafb343 Copter: use AP_FWVersion singleton 2018-06-18 19:10:37 +01:00
murata a970eacf49 Copter: Do not use the Delay method wrapper. 2018-06-16 09:40:47 +09:00
Peter Barker 078d90132c Copter: use AP_RTC
Co-authored-by: patrickelectric@gmail.com

Copter: AP_GPS now sets the system time directly

Copter: use AP_RTC for mission delays

Copter: Remove ap_t bits counter (Patrick José Pereira)

Change bits in ap_t to bool and add a static assert
2018-06-15 08:01:22 +10:00
Randy Mackay 2af8e673cc Copter: add cork-push to esc calibration
Also remove unnecessary duplicate call to motors::set_throttle_passthrough_for_esc_calibration
2018-06-13 13:20:08 +09:00
Randy Mackay 41767e0458 Copter: esc calibration fix 2018-06-13 13:20:08 +09:00
Peter Barker 955baa47c2 Copter: move handling of MAV_CMD_DO_GRIPPER up 2018-06-11 19:07:39 +01:00
apinxiko e440583a7c Copter: Beeping when first reaching waypoint while in holding there 2018-06-11 16:45:48 +09:00
apinxiko 5df4b9f6fd Beeping when first reaching waypoint even while in holding there 2018-06-11 16:45:48 +09:00
chobits 75c2a2b02a Copter: check for fence breaches when disarmed 2018-06-11 11:41:10 +09:00
bnsgeyer b4d2406062 Copter: Tradheli - fixes collective jump on rotor shutdown in althold and loiter 2018-06-11 08:39:27 +09:00
Randy Mackay a97e37be9f Copter: 3.6.0-rc2 release notes 2018-06-06 12:02:40 +09:00
Peter Barker 4e3bbe9311 Copter: move sanity check for rangefinder alt to within protected func
get_surface_tracking_climb_rate can do an additional check....
2018-06-06 08:33:56 +09:00
Peter Barker ab68e4fe8b Copter: log quiet-nan for rangefinder-desired-alt when not using it 2018-06-06 08:33:56 +09:00
Pierre Kancir b95fe2b8b1 Copter: rename SPRAYER-enabled-define to SPRAYER_ENABLED 2018-06-05 12:08:17 +09:00
Michael du Breuil 6c94811e00 Copter: Update to support new RC override conventions 2018-06-05 09:51:09 +10:00
Peter Barker 6d9a131a26 Copter: make VFR_HUD always return height above MSL 2018-06-05 09:38:20 +10:00
Michael du Breuil 749e0acd10 Copter: Remove software type param 2018-06-05 09:14:12 +10:00
Peter Barker 7015d42ab2 Copter: Location gets ahrs from singleton 2018-06-01 16:18:33 +01:00
Peter Barker 78d2c52a3f Copter: move try_send_message handling of EKF_STATUS_REPORT up 2018-06-01 16:12:45 +01:00
Peter Barker e3ddf7dadd Copter: rename SPRAYER-enabled-define to SPRAYER_ENABLED 2018-06-01 15:13:05 +09:00
Peter Barker 4b4e66e2bd Copter: correct comment about mode change 2018-06-01 15:01:46 +09:00
Peter Barker db60e93716 Copter: correct comment on deprecated switch option 2018-06-01 15:01:46 +09:00
Andrew Tridgell b8d47f346e Copter: fixed interlock check on helis
the motors check is always false when disarmed, so can't be used for
arming check
2018-06-01 10:14:20 +09:00
Randy Mackay 25961b6d13 Copter: flip mode format fix 2018-05-31 15:21:50 +09:00
Randy Mackay 0ba105f649 Copter: minor format fix to guided
no need to specify copter
non-functional change
2018-05-31 15:21:42 +09:00
Peter Barker c09ccf5b61 Copter: split home-set and home-locked state 2018-05-29 14:38:45 +10:00
Peter Barker 7c98082389 Copter: create persist_streamrates() callback to indicate persistence 2018-05-29 13:08:29 +10:00
Peter Barker 5f2221fe74 Copter: move handling of VFR_HUD into GCS_MAVLink_Copter 2018-05-29 13:00:40 +10:00
Andrew Tridgell 2425c65e74 Copter: implement 'air-mode' for copter
this implements what betaflight calls 'air-mode'. This gives attitude
control when throttle is at zero, allowing for zero-throttle maneuvers,
plus keeping the copter level on the ground.

This was already implemented if an interlock switch was setup, but it
should also work with an arming switch. If using an arming switch then
throttle should not be considered zero as long as the arming switch
hasn't gone low.
2018-05-29 10:27:14 +09:00
Andrew Tridgell 0d56526400 Copter: added de-bouncing of aux switches
this prevents a crash with a switch such as arm/disarm getting a
single frame RC glitch
2018-05-29 08:26:46 +09:00