Commit Graph

323 Commits

Author SHA1 Message Date
José Roberto de Souza 9889f826b3 AP_HAL_Linux: RCInput_UDP: Fix compiling warning
This warning happens because of the difference of datatypes between
32 and 64 bits processors.

%% libraries/AP_HAL_Linux/RCInput_UDP.o
/home/zehortigoza/dev/ardupilot/libraries/AP_HAL_Linux/RCInput_UDP.cpp: In member function 'virtual void Linux::LinuxRCInput_UDP::_timer_tick()':
/home/zehortigoza/dev/ardupilot/libraries/AP_HAL_Linux/RCInput_UDP.cpp:42:72: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 3 has type 'uint64_t {aka long unsigned int}' [-Wformat=]
             hal.console->printf("no rc cmds received for %llu\n", delay);
2015-10-16 10:28:07 +11:00
José Roberto de Souza e6f0ba6c8b AP_HAL_Linux: Compile RCInput_UDP in all Linux boards
This RCInput is generic enough to be used on every Linux board.
2015-10-16 10:28:06 +11:00
Julien BERAUD ffbb892a01 AP_HAL_Linux: add support for a pwm heater
It uses a heating resistor controlled by a pwm.
By changing the duty cycle of the pwm, we can control the temperature.
A simple PI algorithm is used in order to get to the correct temperature
fast enough and without too much overshoot
It is implemented as a member of the Util class in order not to make to much
modification to the current codebase
2015-10-06 15:21:39 +11:00
Lucas De Marchi 0dad58ae8b AP_HAL_Linux: RCOutput_Bebop: group writes
This allows to remove the hard limit of 4 motors in Bebop, allowing to
execute the motor test.
2015-10-06 11:03:30 +11:00
Lucas De Marchi 24f41538cb AP_HAL_Linux: RCOutput_PCA9685: group writes 2015-10-06 11:03:30 +11:00
Julien BERAUD 1c46205c2b AP_HAL_Linux: fix warning
Fix warning and use htole16 instead of trying to implement it.
The current code does nothing on little endian platforms.
Moreover, the status variable was unused.
2015-10-06 10:34:59 +11:00
raspilot aa4d16622e HAL_Linux_Class: Init spi before rcin & rcout, because raspilot rcin & rcout use spi. 2015-10-02 09:54:55 +10:00
raspilot 5dc18b9a54 HAL_Linux_Class: Fix the broken declare of "LinuxUtilRPI utilInstance" at building raspilot. 2015-10-02 09:47:18 +10:00
Lucas De Marchi 191ec10554 AP_HAL_Linux: remove unused write method 2015-09-29 11:53:46 +09:00
Lucas De Marchi fc2a1d27b4 AP_HAL_Linux: fix build for raspilot after Util change
Make sure raspilot also builds after making the Util class common for
RPI-based boards.
2015-09-24 15:31:32 +10:00
Lucas De Marchi 55e1d60b54 AP_HAL_Linux: Use from() method for downcast in Util class 2015-09-24 15:31:32 +10:00
dgrat 15b3717d89 AP_HAL_Linux: Move RPi version check to util class
- Moved the version check functions to util.
 - Removed a redundant version check.
 - Removed redundant version check functions from RCInput.
2015-09-24 13:04:18 +10:00
dgrat 2590db378a AP_HAL_Linux: remove extra spaces in RCInput_Navio 2015-09-24 13:04:18 +10:00
dgrat e96a1bae8a AP_HAL_Linux: cleanup pointer casts in RCInput_Navio
Although RPi is 32 bits, use uintptr_t and friends for casts.
2015-09-24 13:04:18 +10:00
Lucas De Marchi 54c2c5f682 AP_HAL_Linux: use method for downcast
Instead of just doing a static cast to the desired class, use a method
named "from". Pros:

  - When we have data shared on the parent class, the code is cleaner in
    child class when it needs to access this data. Almost all the data
    we use in AP_HAL benefits from this

  - There's a minimal type checking because now we are using a method
    that can only receive the type of the parent class
2015-09-23 09:01:29 +10:00
mirkix 93941c3349 AP_HAL_Linux: Add support for using SPI devices of the same type. 2015-09-18 09:15:09 +10:00
Andrew Tridgell 61441ab35d HAL_Linux: fixed apm2 build 2015-09-14 14:22:16 +10:00
Andrew Tridgell bf001f19ff HAL_Linux: don't panic on runtime failures 2015-09-14 14:22:16 +10:00
raspilot 9f91eb020e AP_HAL_Linux: new files for raspilot 2015-09-14 14:22:16 +10:00
raspilot 30a2fe0857 AP_HAL_Linux: added scheduler hooks for raspilot 2015-09-14 14:22:16 +10:00
raspilot 25cddbcbaa AP_HAL_Linux: added SPI support for raspilot 2015-09-14 14:22:16 +10:00
raspilot 7d329205ec AP_HAL_Linux: added tonealarm support for raspilot 2015-09-14 14:22:16 +10:00
raspilot a6736d8e61 AP_HAL_Linux: fixed ublox debug message 2015-09-14 14:22:16 +10:00
raspilot 444081d38d AP_HAL_Linux: added support for raspilot objects 2015-09-14 14:22:16 +10:00
raspilot f057fe3d02 AP_HAL_Linux: added support for raspilot GPIO 2015-09-14 14:22:15 +10:00
raspilot 9a73df1bea AP_HAL_Linux: added support for raspilot RCInput 2015-09-14 14:22:15 +10:00
Víctor Mayoral Vilches 728921f7c5 AP_HAL_Linux: ERLEBOARD legacy support
This config referred to the legacy Erle-Board
https://erlerobotics.com/blog/product/erle-board/
The configuration is preserved to support the
existing boards.
2015-09-09 10:31:55 +10:00
Fredrik Hedberg d9a4b6b089 AP_HAL_Linux: Allow PCA9685 to be used on non-default I2C addresses. 2015-09-09 08:43:22 +10:00
Fredrik Hedberg 9d9e6d0b34 AP_HAL_Linux: Only use enable pin for PCA9685 if we need to. 2015-09-09 08:43:22 +10:00
Fredrik Hedberg 21b9f96ce3 AP_HAL_Linux: Enable use of all 16 channels for non-Navio PCA9685. 2015-09-09 08:43:22 +10:00
Julien BERAUD a057a8a009 AP_HAL_Linux: Add Support for RCInput_UDP
very simple protocol to receive RC cmds via UDP
Add support for it on the bebop
2015-09-07 12:10:08 +10:00
Lucas De Marchi 0000ff45cb AP_HAL_Linux: RCOutput_PCA9685: remove trailing whitespace 2015-09-03 18:43:21 +10:00
Lucas De Marchi 18321a77c4 AP_HAL_Linux: rename RCOutput_Navio to RCOutput_PCA9685
The RCOutput_Navio is now generic enough to be used by other boards.
Rename it to use the name of the chip, PCA9685.
2015-09-03 18:43:21 +10:00
Lucas De Marchi e1f0284df2 AP_HAL_Linux: PCA9685: build on all Linux boards 2015-09-03 18:43:21 +10:00
Fabio Mello c0caed1b64 AP_HAL_Linux: RCOutput_Navio: allow to use internal clock
It's possible to use the internal clock in PCA96895 if we account for
the drift it contains. This is a bit different from solutions in other
projects like the Adafruit library and the PX4 firmware: instead of
applying a correction to the final frequency we apply the correction to
the clock since this is the source of the error.

With this fix we arrived to much better results across different lots of
sensors.

The Navio board continues to use the external clock and should have no
difference behavior.
2015-09-03 18:43:21 +10:00
Lucas De Marchi 6c042b6666 AP_HAL_Linux: RCOutput_Navio: allow to have other offset 2015-09-03 18:43:21 +10:00
Lucas De Marchi 3beaf34aa1 AP_HAL_Linux: RCOutput_Navio: allow to have other OE pin
While at it also rename enable_pin to follow the convention of starting
with underscore for private members.
2015-09-03 18:43:21 +10:00
Gustavo Jose de Sousa 4af2a9a9cc AP_HAL_Linux: SPI: adapt to the new signature of transaction() 2015-09-01 20:26:05 +10:00
Lucas De Marchi dabfeff440 AP_HAL_Linux: standardize inclusion of libaries headers
Do the missing header changes due to changing the code before the pr
getting accepted.
2015-08-18 17:12:51 +10:00
Gustavo Jose de Sousa 124b750c10 AP_HAL_Linux: standardize inclusion of libaries headers
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
2015-08-11 16:28:43 +10:00
Andrew Tridgell 45a7c37734 HAL_Linux: added bcast flag for udp broadcast 2015-07-29 16:46:53 +10:00
Andrew Tridgell b99740cb93 HAL_Linux: sped up UDP transfers by about 25x
allow more than 1 packetised transfer per tick
2015-07-29 14:19:46 +10:00
Andrew Tridgell a5c7aa1b19 HAL_Linux: allow startup before network bringup
this makes it possible to bootup ardupilot before the desired network
interface is available. This is very useful for when using 3G dongles
in aircraft
2015-07-29 09:55:47 +10:00
Andrew Tridgell 55fc66ec65 HAL_Linux: implemented TCP server as a single driver
the wait flag just changes startup behaviour. The TCP server should
always be a server with listen and accept. We don't need two drivers
2015-07-29 09:37:57 +10:00
Andrew Tridgell f72d9c6393 HAL_Linux: replace recvfrom with recv 2015-07-29 08:39:29 +10:00
Andrew Tridgell 3f3aaa3c50 HAL_Linux: removed 0 timeout from sendto call 2015-07-29 08:36:50 +10:00
Staroselskii Georgii aa3efecef3 AP_HAL_Linux: fixed _parseDevicePath() in LinuxUARTDRiver
The current implementation doesn't throw an error on a malformed path string.

i.e. udp:192.168.1.1.14550 instead of udp:192.168.1.1:14550 may result in a memory leak or whatsoever.

The commit fixes the issue and outputs a nice error message if anything's wrong.
2015-07-29 08:36:09 +10:00
Staroselskii Georgii 0362128265 AP_HAL_Linux: renamed TCPClientDevice 2015-07-29 08:36:09 +10:00
Staroselskii Georgii 211acbec9c AP_HAL_Linux: renamed TCPServerDevice
A more appropriate name for the class.
2015-07-29 08:36:08 +10:00
Staroselskii Georgii a3f47878a2 AP_HAL_Linux: made UARTDriver use TCPServerDevice 2015-07-29 08:36:08 +10:00