Commit Graph

134 Commits

Author SHA1 Message Date
Michael du Breuil 2843e266b5 Plane: Return RESULT_FAILED for GET_CMD_HOME if home is unset 2016-09-03 16:54:14 +09:00
Andrew Tridgell a0fb426a34 Plane: fixes for Fraky_Telem API changes 2016-08-25 10:16:20 +10:00
Tom Pittenger b187e1f9a6 Plane: add reason to set_mode() 2016-08-17 22:38:54 -07:00
Tom Pittenger ca32bcc58d Plane: add new flight mode AVOID_ADSB to mimic GUIDED 2016-08-17 22:38:54 -07:00
Tom Pittenger fa326de7fa Plane: add adsb to failsafe structure and report in heartbeat to GCS 2016-08-17 22:38:54 -07:00
Tom Pittenger b564616db0 Plane: GCS_MAVLink passes packets to AP_Avoidance
This allows treating GLOBAL_POSITION_INT packets from other vehicles in the same way as ADSB packets
2016-08-17 22:38:54 -07:00
Tom Pittenger 7445fac577 Plane: move mavlink msg handling into library 2016-08-16 16:33:36 -07:00
Andrew Tridgell d482c7f4b7 Plane: decode correct ADSB packet 2016-08-16 16:33:36 -07:00
Andrew Tridgell b29b609bcc Plane: added AFS support for quadplanes 2016-08-16 12:56:12 +10:00
Andrew Tridgell 76b6cbbda1 Plane: prevent motor startup on reboot in quadplanes
we need to prevent RC overrides within px4io from running
2016-08-16 12:53:34 +10:00
Peter Barker cb7686001f Plane: add dataflash as a bit for the mavlink SYS_STATUS message 2016-08-11 17:48:44 -03:00
Tom Pittenger 5fd3c79202 Plane: Fix typos 2016-08-04 11:42:41 -07:00
Lucas De Marchi c27ebd10c2 ArduPlane: Remove i2c lockup count
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
2016-07-28 18:03:09 -03:00
Andrew Tridgell 327a057ee0 Plane: added internal combustion engine support
this allows for automatic engine start and restart
2016-07-25 10:06:03 +10:00
Andrew Tridgell 02babb71b3 ArduPlane: adjust for 16 channels in SERVO_OUTPUT_RAW 2016-07-25 10:06:02 +10:00
Tom Pittenger 3f195df9f0 Plane: handle ADSB-Out packets 2016-07-22 13:38:58 -07:00
Tom Pittenger 5c3cca7911 Plane: handle incoming ADSB transceiver packet 2016-07-22 12:20:39 -07:00
Andrew Tridgell 7b147e3941 Plane: handle PLAY_TUNE message 2016-07-22 15:00:17 +10:00
Andrew Tridgell 569cc1c108 Plane: support the LED_CONTROL MAVLink message 2016-07-19 13:37:14 +10:00
Allan Matthew c479fcab39 Plane: support GPS_INPUT mavlink message 2016-07-12 15:35:09 +09:00
Andrew Tridgell e8976d3a89 Plane: check for optflow enable in more places 2016-07-12 09:05:52 +10:00
Tom Pittenger 0597dbd033 Plane: allow SET_ATTITUDE_TARGET to set rpy and throttle 2016-07-01 08:28:53 -07:00
Tom Pittenger 85afd9e245 Plane: remove guided roll flag, handle it with timer=0 2016-06-30 07:48:37 -07:00
Michael Day 8ac433f991 Plane: Can now command roll from a companion computer. 2016-06-30 10:27:44 -04:00
Tom Pittenger 9b973fb899 Plane: add ADSB_streamrate 2016-06-19 11:24:31 -07:00
Tom Pittenger 204abfd45e Plane: set heartbeat.system_status to Critical for low-battery failsafe events 2016-06-07 17:14:51 -07:00
Tom Pittenger 3140ce6ab6 Plane: change MAVLINK_MSG_ID_SET_POSITION_TARGET_GLOBAL_INT gcs msg to remove abbreviations. Hope it fits! 2016-06-07 08:28:35 -07:00
Tom Pittenger bd270720da Plane: whitespace formatting 2016-06-07 08:27:40 -07:00
Michael Day 429e348824 Plane: Can now change current WP alt via mavlink.
Uses the mavlink msg SET_POSITION_TARGET_GLOBAL_INT
2016-06-07 08:16:39 -07:00
Tom Pittenger 01e636065d Plane: non-functional: mostly whitespace and removed extra set result statement 2016-06-07 08:11:05 -07:00
Michael Day 2c0f0a04d8 Plane: Only allow speed changes in GUIDED and AUTO modes. 2016-06-07 08:22:44 -04:00
Andrew Tridgell eae2bf54ca Plane: fixed gcc 6.1 build error 2016-06-06 07:43:45 +10:00
Peter Barker ee5290c178 Plane: avoid switch statement for enabling fence if no fence present 2016-06-02 14:37:21 +10:00
Tom Pittenger 954c987075 Plane: do not parse GEOFENCE packets when geofence is disabled via compile option 2016-06-01 17:38:52 -07:00
Tom Pittenger ea9e39212f Plane: use new check_latlng helper 2016-06-01 17:38:51 -07:00
Peter Barker 28361afc2a Plane: move telemetry_delayed up into base class 2016-05-31 08:46:09 +10:00
Peter Barker 9ee62aac30 Plane: move adjust_rate_for_stream up 2016-05-29 19:38:50 +10:00
Peter Barker af5a52e2aa Plane: subclass GCS_MAVLink in place of defining its functions for it 2016-05-29 16:21:21 +10:00
Andrew Tridgell 6e4c0dd3d7 Plane: allow non-blocking calibrations while armed 2016-05-24 17:10:41 +10:00
Andrew Tridgell d3494d1369 Plane: don't stall EKF during baro cal 2016-05-24 17:00:56 +10:00
Andrew Tridgell 5b4bbf08fd Plane: use send_heartbeat wrapper 2016-05-21 15:25:18 +10:00
Andrew Tridgell 9f47e6417b Plane: always build with MAVLink2 headers 2016-05-21 15:25:16 +10:00
Andrew Tridgell eee06da1b5 Plane: use HAVE_PAYLOAD_SPACE() 2016-05-21 15:25:14 +10:00
Andrew Tridgell a103e70460 ArduPlane: handle SETUP_SIGNING message 2016-05-21 15:25:13 +10:00
Don Gagne 151686ce9d ArduPlane: SET_SENSORS_OFFSETS support for third compass 2016-05-19 18:51:17 -03:00
Andrew Tridgell e3b2e90a27 Plane: cleanup unnecessarily complex gcs[] usage 2016-05-17 08:27:39 +10:00
Tom Pittenger 8a58f5a5eb Plane: convert airspeed_error_cmd to airspeed_error (in meters) 2016-05-13 17:21:59 -07:00
skyscraper 7f29903287 ArduPlane: Fix up after refactoring RC_Channel class
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
2016-05-10 16:21:16 +10:00
Leandro Pereira f23bd7e09d GCS_MAVLink: Use a single stream_trigger() implementation
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
2016-05-07 23:49:35 -03:00
Andrew Tridgell 3853aa0fe3 Plane: fix for changed API 2016-05-07 18:27:22 +10:00