Commit Graph

54 Commits

Author SHA1 Message Date
Pierre Kancir ee7355a301 SITL: Reduce some variables scope and include 2017-03-18 19:58:11 +11:00
Pierre Kancir 8054405521 SITL: Change interface port to a generic solution for external simulator 2017-03-18 19:58:11 +11:00
Pierre Kancir 63ea8c6f21 SITL: enable multi sitl for gazebo 2017-03-18 19:58:11 +11:00
jaxxzer b98573d55f SITL: Improved Sub simulation
-Constrain z axis movement between -100m (seafloor) and 0m (water
surface)
-More accurate thruster modelling
2017-03-07 09:35:41 +11:00
Andrew Tridgell 3c8020862c SITL: support a builtin tailsitter vehicle type 2017-02-18 17:26:43 +11:00
Pierre Kancir bf135aeff7 SITL: Aircraft correct some syntax, implicit cast, make some local variable const, remove tabs and whitespace 2016-12-19 14:53:17 +00:00
Peter Barker b751f836bb SITL: attach a string with a mass on the end to servo gripper 2016-12-02 12:04:05 +11:00
Peter Barker f8918d15b1 SITL: add a hagl method to aircraft 2016-12-02 12:04:05 +11:00
Peter Barker f1c23dc9be SITL: remove argument to on_ground
This was always the current position
2016-12-02 12:04:05 +11:00
Peter Barker e24f3f9419 SITL: correct on-ground correction
Using the cached ground_height_difference may mean
you end up at the wrong height if you were near
the edge of an SRTM square and had high horizontal
velocity
2016-12-02 12:04:05 +11:00
ori ganoni 631b5c3ebc adding turbulance to SITL 2016-11-17 20:06:35 -08:00
Peter Barker 1997a4e044 SITL: include mass of sprayer payload in vehicle mass 2016-10-29 15:02:56 +09:00
priseborough d830f68901 SITL: Add angular acceleration to simulator states
The calculation used is an approximation to work around the lack of angular acceleration in the interface with the flight dynamics model.
2016-10-27 14:54:44 +11:00
Andrew Tridgell 5e03358b0b SITL: added servo filtering
SIM_SERVO_SPEED is servo time constant in seconds
2016-10-25 20:39:38 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell c275e7c61d SITL: added SIM_SPEEDUP parameter
allows changing speed of simulation while running
2016-09-19 07:45:24 +10:00
Andrew Tridgell a1c759e491 SITL: added sensor smoothing
this adds smoothing of sensors for kinematic consistency when
interacting with the ground. It means when we land the EKF doesn't go
crazy
2016-07-19 21:38:16 +10:00
Andrew Tridgell e7a54c83d1 SITL: allow SITL to use terrain data for ground height 2016-07-19 14:42:31 +10:00
Andrew Tridgell 4f99c17aae SITL: added X-Plane 10 SITL backend 2016-06-19 13:59:15 +10:00
Paul Riseborough 55b0bbd3f1 SITL: Add simulation of 3D earth magnetic field
Use an independant method to the flight code using tables that that can updated.
Data taken from NOAA online calculator using WMM data at 2016-6-16 date
2016-06-19 12:51:34 +10:00
Paul Riseborough 078284e2e2 SITL: Add magnetic field environment to simulation
Includes parameters enabling a ground level magnetic anomaly to be modelled.
TODO - add automatic setting of declination, inclination and field strength using WGS-84 position.
2016-06-19 12:51:34 +10:00
Andrew Tridgell e360c6117e SITL: make SIM_* variables available to simulator backends directly 2016-06-17 08:36:13 +10:00
Gustavo Jose de Sousa ce8766e1cd SITL: remove set_yaw_degrees()
That function isn't being used anywhere.
2016-05-10 16:16:37 +10:00
Andrew Tridgell 3b0cd9f101 SITL: added RC input from FlightAxis
use the interlink controller for input for 6 channels
2016-05-04 12:51:27 +10:00
Andrew Tridgell 57aef8e1e9 SITL: added basic wind support in multicopter, plane and quadplane
this adds non-turbulent wind support for the built-in simulators. I
added it primarily for quadplane testing, but it should also be useful
for multicopter navigation testing.
2016-04-20 11:48:37 +10:00
Andrew Tridgell 7a7bd0607f SITL: first version of FlightAxis SITL support 2016-01-09 07:38:51 +11:00
Andrew Tridgell 62b2a2117d SITL: only report ground contact at most once per second 2016-01-05 09:47:58 +11:00
Andrew Tridgell d425965f6d SITL: expose home yaw to FDMs 2016-01-01 17:00:57 +11:00
Andrew Tridgell 8a98ce427c SITL: moved to common code for attitude/pos update 2016-01-01 15:12:33 +11:00
Andrew Tridgell 6f9e9d761f SITL: move calculations into multicopter frame class
this will enable a QuadPlane model
2016-01-01 14:35:15 +11:00
Tom Pittenger f88de986bc SITL: created ADSB simulator to generate additional ghost aircraft within SITL
The values are very aggressive, you'll come into contact with another aircraft very soon
Credit goes to Tridge for this work

This feature is enabled with the following command:
sim_vehicle -A --adsb
2015-11-23 19:45:40 +11:00
Andrew Tridgell 223ce2b6aa SITL: allow FDM models to provide voltage, current and RPM 2015-11-23 13:46:27 +11:00
Andrew Tridgell e1cb9beeef SITL: expose update rate to HAL_SITL
and fixed dataflash reference loop
2015-11-16 17:57:36 +11:00
Caio Marcelo de Oliveira Filho 11b599bcd0 SITL: use #pragma once
For the general case, pragma once is better replacement for of include
guards. One line instead of three, less scopes to close in the end of
the file, no chance to having the outdated names in the define symbol.
2015-10-22 13:36:19 -02:00
Caio Marcelo de Oliveira Filho 288dc2a385 SITL: clean up includes
Remove unnecessary includes, reorder them in blocks separated by a blank
line

   - Corresponding header file (if exists)
   - System headers
   - Other ArduPilot library headers
   - "Local" headers (from the same library)
2015-10-22 13:36:19 -02:00
Caio Marcelo de Oliveira Filho 5ddd802320 SITL: use coding style in class declarations 2015-10-22 11:15:34 -02:00
Caio Marcelo de Oliveira Filho 49a42dc985 SITL: use a SITL namespace 2015-10-22 11:04:42 -02:00
Fredrik Hedberg e2027a8414 SITL: Add HELI_DUAL_FRAME and HELI_COMPOUND_FRAME. 2015-08-13 18:23:30 +10:00
Gustavo Jose de Sousa a02e7730ea SITL: standardize inclusion of libaries headers
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
2015-08-11 16:38:25 +10:00
Andrew Tridgell 1f58e0080a SITL: fixed some build warnings 2015-07-06 09:21:49 +10:00
Andrew Tridgell ff88932091 SITL: setup turbulence in JSBSim 2015-06-29 11:25:59 +10:00
Andrew Tridgell 2b2259a6d7 SITL: use more granrular sleeps for windows 2015-05-25 17:05:44 +10:00
Andrew Tridgell c06d81a06a SITL: use autotest_dir
this allows for the aircraft directory for SITL to be packaged without
the source tree
2015-05-25 13:04:46 +10:00
Andrew Tridgell da5d5c9936 SITL: fixed airspeed pass-thru from simulators 2015-05-23 11:24:10 +10:00
Andrew Tridgell 091a1e7fe0 SITL: fixed wind support in JSBSim 2015-05-23 11:03:57 +10:00
Andrew Tridgell c136d65c25 SITL: added initial JSBSim simulator backend 2015-05-10 21:01:49 +10:00
Andrew Tridgell 93d5101bf9 SITL: added CRRCSim simulation connection 2015-05-05 21:42:45 +10:00
Andrew Tridgell 42c6801d61 SITL: reformat SITL code with astyle 2015-05-05 11:49:54 +10:00
Andrew Tridgell 64fa219c05 SITL: converted rover simulator from python to C++ 2015-05-05 09:45:53 +10:00
Andrew Tridgell 6ec6158b8b SITL: converted helicopter simulator from python 2015-05-05 09:45:53 +10:00