Commit Graph

378 Commits

Author SHA1 Message Date
Andrew Tridgell 458e967d06 Plane: added RPM logging
useful for seeing if a petrol motor is still running
2015-09-24 20:58:18 +10:00
Tom Pittenger 25da4ec0ea Plane: added flight stage FLIGHT_LAND_ABORT and abort mechanism
- enabled via new param LAND_ABORT_THR default is 0 (disabled)
- Triggered via 95% throttle during landing, a landing abort will take place.
- This copies all takeoff params for right now, we can make this better later if needed
- added mission item command to NAV_LAND which is the abort takeoff altitude. If 0 then use last takeoff if available, else use 30m
- hold heading, just like takeoff, until altitude is reached
- pitch is constrained to takeoff pitch, or else 10deg if not available
- After abort altitude is reached, the normal landing restart happens (DO_LAND_START or decrement mission)
- restart landing by jumping to DO_LAND_START or decrement mission on mode change
2015-09-09 09:04:24 +10:00
Tom Pittenger 6e55b44b63 Plane: change NAV_CONTINUE_AND_CHANGE_ALT behavior
Use waypoint bearing if available, otherwise use gps projected ahead 1km else yaw
Perform update before making decision to finish cmd so it always executes
2015-09-08 17:05:54 +10:00
Siddharth Bharat Purohit aea1db7348 ArduPlane: implement on-board compass cal for arduplane 2015-09-03 16:59:14 +10:00
Peter Barker c2d61391ef Plane: DFMessageWriter; ability to trickle messages out to DF 2015-09-03 15:20:20 +10:00
Gustavo Jose de Sousa a6bdee076e ArduPlane: remove comments identifying task
We don't need those comments anymore, now that we log the task name. Also,
keeping the comments means that we need to fix them when tasks are added in the
middle, not to mention the problem with tasks that are added selectively (i.e.,
guarded by preprocessor directives).
2015-09-01 20:22:19 +10:00
Gustavo Jose de Sousa 36b457a536 ArduPlane: use function name for AP_Scheduler task name
That makes it easier to identify tasks when debug is enabled in AP_Scheduler.
2015-09-01 20:22:18 +10:00
Gustavo Jose de Sousa b0258d902c ArduPlane: use designated initializers for tasks structs
Makes code less prone to break build and semantics (e.g., when a new field is
added).
2015-09-01 20:22:18 +10:00
Stewart Loving-Gibbard 722dd29370 Plane: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more.
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
2015-08-29 08:05:59 +10:00
Randy Mackay 4bf36d787b Plane: use labs for int32 values 2015-08-28 13:14:50 +10:00
squilter 583c087eca Plane: update severities 2015-08-28 10:04:35 +10:00
Tom Pittenger 37336bbbe1 Plane: moved is_flying related code to its own file 2015-08-23 10:34:19 +10:00
Tom Pittenger 204ff7b158 Plane: move statics into new struct
removed default case statements
2015-08-23 10:34:18 +10:00
Tom Pittenger da8f4f9e95 Plane: reworked is_flying
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
Andrew Tridgell cc96f80f02 Plane: make TRAINING mode obey stall prevention roll limits
Fixes issue#2014
2015-08-14 13:36:21 +10:00
Andrew Tridgell 9f9080983b Plane: trim out some log msgs on APM2
save a bit more flash
2015-07-30 11:14:06 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Randy Mackay b670988e05 Plane: log IMUDT 2015-07-14 13:31:56 +09:00
Lucas De Marchi e97034f8e9 ArduPlane: use ARRAY_SIZE macro 2015-07-07 07:56:30 +10:00
Andrew Tridgell 4aac2c5c96 Plane: trigger OVERRIDE_CHAN in px4io
setup the MODESWITCH channel as our OVERRIDE_CHAN, allowing for
instant manual passthru in px4io when OVERRIDE_CHAN goes above 1750

This makes for faster switching, and avoids bugs where a still enabled
FMU channel disables override
2015-06-21 18:19:16 +10:00
Andrew Tridgell 358a13261c Plane: moved sink_rate calculation to update_alt()
this makes it available to non-landing code
2015-06-15 09:20:55 +10:00
Randy Mackay 814cb5ce18 Plane: add vibration DF logging and send to GCS 2015-06-12 21:36:47 +09:00
Lucas De Marchi 6bbf0e7770 Plane: stop using alias FUNCTOR_BIND_VOID 2015-06-04 13:37:38 +09:00
Andrew Tridgell db784c83dc Plane: removed unnecessary pragmas 2015-06-01 17:42:21 +10:00
Andrew Tridgell 964b8ed2f3 Plane: fix for scheduler API change 2015-05-26 14:33:52 +10:00
Lucas De Marchi 7c4cf41ebc ArduPlane: use functor macros
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:54 +10:00
Andrew Tridgell b92c2409e4 Plane: added local millis() and micros() to reduce code size a bit 2015-05-21 07:48:53 +10:00
Andrew Tridgell 18c37935c9 Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00