Commit Graph

64 Commits

Author SHA1 Message Date
Iampete1 55e72a9848 Copter: auto yaw re-work 2022-11-01 08:21:50 +09:00
Leonard Hall 4b20a2d5f1 Copter: Add control over throttle ramp time during take-off 2022-08-31 19:19:04 -04:00
Leonard Hall 427c64eff0 Copter: Replace set_throttle_takeoff with init_z_controller 2022-08-29 13:35:32 +09:00
Randy Mackay 658298ed1d Copter: auto takeoff may trigger terrain failsafe 2022-08-19 19:51:26 -04:00
Randy Mackay 553ad877f6 Copter: fix takeoff to terrain alt 2022-03-11 18:12:27 +09:00
Randy Mackay 759e2b1b55 Copter: rename auto_take_off_xx to auto_takeoff_xx 2022-03-11 18:12:27 +09:00
Leonard Hall cf5565f17c Copter: tighten auto_takeoff_complete checks 2022-03-07 16:14:23 +09:00
Leonard Hall fb6c3ebb72 Copter: auto and guided takeoff use postion controller 2022-03-07 16:14:23 +09:00
Josh Henderson 3107c42fca Copter: INAV rename for neu & cm/cms 2021-11-30 10:08:07 +11:00
Randy Mackay 59d1af2716 Copter: guided takeoff supports autoyaw
allows both pilot controlled and externally controlled yaw control
2021-09-28 00:17:25 +09:00
Leonard Hall 5d5ccc8c78 Copter: Update ACRO to use rate parameters and update expo function 2021-09-23 20:03:53 +09:00
Tatsuya Yamaguchi 6d7ef8f436 Copter: ignore pilot yaw during takeoff with option 2021-09-09 07:54:59 +09:00
bnsgeyer ca007ee6f6 Copter: Allow Tradheli to spoolup in guided or auto mode 2021-08-23 12:26:00 +09:00
Andrew Tridgell d89388c4cc Copter: use cleaned up APIs 2021-06-24 20:28:45 +10:00
Leonard Hall 3b0a870504 Copter: Rename set_yaw_target_to_current_heading 2021-05-26 16:03:05 +09:00
Leonard Hall e294991b08 Copter: Fix before squash 2021-05-24 20:13:37 +10:00
Leonard Hall caeaf7c047 Copter: Fix take off altitude 2021-05-24 20:13:37 +10:00
Leonard Hall 4bae8f03a4 Copter: Use PosControl fixes 2021-05-24 20:13:37 +10:00
Leonard Hall a780759221 Copter: minor format fixes 2021-05-12 17:16:00 +10:00
chobits 7b60ace18b Copter: fix takeoff drift if vehicle is not in origin 2021-05-03 20:10:39 -04:00
Leonard Hall 726074be91 Copter: Support Thrust Vector based navigation 2021-04-27 17:13:55 +09:00
James O'Shannessy 2a9affe517 ArduCopter: Remove unused fence floor enable function 2021-03-05 14:52:46 +11:00
James O'Shannessy f228adfa75 ArduCopter: Improve auto-enable/disable of fence 2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 92122e5133 Copter: automatically enable and disable floor fence on automated takeoff and landing 2021-03-05 14:52:46 +11:00
Patrick José Pereira ffe356d597 ArduCopter: Simplify boolean expression
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-09 11:04:18 +09:00
Randy Mackay ed7580e83c Copter: takeoff relaxes wpnav and pos control during spool up 2020-11-06 08:24:03 +09:00
Peter Barker d87986ecdd Copter: move set_throttle_takeoff implementation into Mode
No callers except the mode objects, so move it.
2020-08-05 08:23:03 +09:00
Randy Mackay 90883624bc Copter: fix use of wp-navmin-alt 2020-03-11 10:39:18 +09:00
Bogdan Grigoruta 5183703243 Copter: move Mode::auto_takeoff_run to takeoff.cpp 2019-11-18 09:14:08 +09:00
Randy Mackay 5276e67cec Copter: minor format fix for takeoff.cpp 2019-11-11 17:19:28 +09:00
Peter Barker 676d75c391 Copter: correct namespacing of Copter modes
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.

This was done mechanically for the most part.

I've had to remove the convenience reference for ap as part of this.
2019-06-11 09:18:22 +09:00
Peter Barker 3c436b30f0 Copter: have takeoff.start() handle clearing i terms and setting land-complete 2019-05-15 18:24:26 +10:00
Pierre Kancir caf925eda5 Copter: factorize arm or land check 2019-04-16 10:17:47 +09:00
Peter Barker 46a6f45e4a Copter: adjust for desired spool state and spool state renames 2019-04-14 12:18:03 +09:00
bnsgeyer d949c80d54 Copter: tradheli replaces rotor_runup_complete with spool state 2019-04-08 09:42:21 +09:00
bnsgeyer 3869507839 Copter: Tradheli- removes suppression of hover_trim_roll on auto takeoff 2019-03-29 13:13:55 +11:00
Peter Barker 281dbfcef8 Copter: support send_extended_sys_state 2019-03-12 09:16:13 +09:00
Randy Mackay 717fb4d823 Copter: integrate AC_WPNav::get_speed rename to get_default_speed 2019-01-31 19:34:32 +09:00
Peter Barker 22f7f29045 Copter: move all of waypoint-takeoff into Mode namespace 2018-07-27 13:08:27 +10:00
Peter Barker ff17c78c67 Copter: create Copter::Mode::_TakeOff subobject from takeoff_state 2018-06-26 09:11:21 +09:00
Peter Barker 7883582c65 Copter: move takeoff state into Mode class 2018-06-26 09:11:21 +09:00
Peter Barker 597e876953 Copter: clean up do_user_takeoff 2018-06-26 09:11:21 +09:00
Peter Barker cff1969a29 Copter: make do_user_takeoff a member of Mode 2018-06-26 09:11:21 +09:00
Peter Barker cb26ff64b3 Copter: current_mode_has_user_takeoff -> Mode::has_user_takeoff 2018-06-26 09:11:21 +09:00
Leonard Hall 9544b1763b Copter: replace smoothing gain with AC_AttitudeControl::set_input_tc 2018-03-16 13:50:57 +09:00
Peter Barker b8c432b1a1 Copter: add option to disable GUIDED flight mode
Saves about 6kB of flash
2018-02-27 07:43:13 +09:00
Andrew Tridgell f442b91ea5 Copter: added FLOWHOLD flight mode
This flight mode allows for position hold with optical flow without
needing a rangefinder for height. It can estimate its height from the
flow data and IMU
2018-02-08 17:36:33 +11:00
Randy Mackay 2d23e1f7c7 Copter: rename flightmode_ objects to mode_ 2017-12-12 10:39:26 +09:00
Peter Barker 2db09ba0f7 Copter: FlightMode - convert GUIDED flight mode 2017-12-06 08:24:24 +09:00
ChrisBird caaeae3d0a Copter: Separate max ascent and descent speeds
Added equivalent parameters to WPNAV_SPEED_UP and WPNAV_SPEED_DN

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Flight Modes impacted:
ALTHOLD
AUTOTUNE
CIRCLE
LOITER
POSHOLD
SPORT
TAKEOFF

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.
2017-11-09 09:03:54 +09:00