Commit Graph

258 Commits

Author SHA1 Message Date
James O'Shannessy bc38d8a78c AutoTest: Fix autotest from failing due to state from earlier test
Autotest was failing because there was an expectation that the plane would fly relatively north from the takeoff point.
This assumption may not be true. We work around it by using a tin can instead of an exclusion polygon so that we breach no matter the direction we fly.
2021-05-05 10:59:10 +10:00
James O'Shannessy 0e656c1504 AutoTest: Ensure Plane uses home as Fence Return Point if one is not present and no exclusion fence is present 2021-05-05 10:59:10 +10:00
Iampete1 aa72b7da46 Tools: autotest: Plane: add loiter terrain following test 2021-05-02 18:51:27 +10:00
Peter Barker 0ee0228883 autotest: fix flapping fly-home-land-and-disarm
One of the tests just happened to be within acceptance radius of
waypoint 8 - so when we set that as a waypoint we never saw it actually
be our waypoint so the set_waypoint failed
2021-04-20 23:04:24 +10:00
Peter Barker fff4aa8bde autotest: increase allowed time for climb_before_turn to get home 2021-04-01 19:11:31 +11:00
Peter Barker 30ebe6cde9 autotest: augment test DO_AUX_FUNCTIION test for FAILED AND DENIED 2021-03-31 11:36:09 +11:00
Peter Barker b55094fef4 autotest: Test triggering Auxillary Functions via mavlink 2021-03-31 11:36:09 +11:00
Peter Barker 462ac255a3 autotest: start MAVProxy only as needed for testing 2021-03-19 09:46:45 +11:00
Stavros Korokithakis f6fc6d22da autotest: Fix the climb-before-turn test 2021-03-18 07:37:21 +11:00
Peter Barker 0c7f3d20a4 autotest: fix attitude test
autotest: add a get_messages_frame method

Attempts to get a set of messages as close as reasonable in time.
2021-03-16 14:19:44 +11:00
Stavros Korokithakis 29043d62e9 Add FLIGHT_OPTION to climb before RTL 2021-03-16 11:58:47 +11:00
Hwurzburg d15e01d390 Plane: fix DO_CHANGE_SPEED airspeed to impact only AUTO and GUIDED modes 2021-03-16 10:09:34 +11:00
Peter Barker eb702b0f82 Tools: add support for ATTITUDE_QUATERNION 2021-03-13 09:44:12 +11:00
Peter Barker f78d7c3b25 autotest: add option to not check current wp after set_current_wp
Sometimes a waypoint is set which we'll never emit as our current
waypoint (e.g. a JUMP)
2021-03-10 09:12:39 +11:00
Peter Barker 4a251bebbd autotest: fix fly_home_land_and_disarm; wp 7 is never current wp
This is never a current waypoint, so we can't wait for it
2021-03-10 09:12:39 +11:00
Peter Barker bdeadce95b autotest: improve deadreckoning test
autotest: use location_offset rather than coordinates in Deadreckoning test
2021-03-05 21:34:58 +11:00
Peter Barker 425ab1358a autotest: tidy streamrate handling
Stop setting MAVProxy stream rates; these are neither here-nor-there now as MAVProxy will only modify its own connection's streamrates now

Stop doing the set-streamrate dance to work around MAVProxy's
set_streamrate algorithms.

Remove useless and misleading set of streamrate in Plane test; we reset
streamrates on the reboot immediately following this set.  Considering
the streamrate was never eset this was a good thing.
2021-03-05 21:34:58 +11:00
James O'Shannessy bcc0da9c47 AutoTest: Adds additional autotests to capture mode change while breached
AutoTest: Adds test for fence breach switching to guided mode when no fence return point is present. In upstream, this results in a vehicle fly-away.
2021-03-05 14:52:46 +11:00
James O'Shannessy dac5996d93 AutoTest: Fix autotest conflicts after rebase on upstream 2021-03-05 14:52:46 +11:00
James O'Shannessy fa7be629e5 AutoTest: Make fence tests flake8 compliant 2021-03-05 14:52:46 +11:00
James O'Shannessy 2353b55452 AutoTest: Address race conditions in changes to fence tests 2021-03-05 14:52:46 +11:00
James O'Shannessy 76a2a76b54 AutotTest: Adds autotests for Plane to test RetRally flag added to AC_Fence 2021-03-05 14:52:46 +11:00
James O'Shannessy 8545715837 AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence 2021-03-05 14:52:46 +11:00
James O'Shannessy 6f7ba3b037 AutoTest: Ensure fence is disabled at end of throttle_failsafe_fence test 2021-03-05 14:52:46 +11:00
James O'Shannessy bbd606b8b5 AutoTest: Corrections to autotests 2021-03-05 14:52:46 +11:00
James O'Shannessy 47e76a1807 AutoTest: Move fence enable/disable to common location 2021-03-05 14:52:46 +11:00
James O'Shannessy 215901be30 Autotest: Correct the logic for fence based autotest functions
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
James O'Shannessy 1a3e168ced Autotest: Fence is present, but test looking for not present
Autotest: Remove ties to mavlink FENCE_ACTION

Autotest: Add ArduPlane autotest to test ceiling and floor

Adds a test to ensure the vehicle reverts to RTL when breaching a ceiling or floor.

Autotest: Progress the test once we reach takeoff complete and fence enable

Autotest: Use RC_OPTION for Aux Switch functionality

Autotest: Enable fence last
2021-03-05 14:52:46 +11:00
Peter Barker a235246628 autotest: correct units in new AHRS2 test 2021-03-03 18:41:14 +11:00
Peter Barker b3ee5d5f59 autotest: increase verbosity in AHRS2 test 2021-03-03 16:29:33 +11:00
Peter Barker 317181922c autotest: ensure we're getting vaguely sane data in AHRS2 message 2021-03-02 20:48:36 +11:00
Peter Barker cc83562add autotest: tidy fence handling 2021-03-02 16:54:06 +11:00
Peter Barker 10007e2e42 autotest: load missions natively rather than using MAVProxy 2021-03-02 14:24:36 +11:00
Peter Barker 9120882e9e autotest: print name of open dataflash log when test exception caught
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.

Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker d4aef2dba8 autotest: stop using MAVProxy to change mode 2021-02-20 00:03:24 +11:00
Peter Barker c13d229877 autotest: use self.set_current_waypoint rather than "wp set" to set current wp 2021-02-19 12:25:40 +11:00
Peter Barker dcc04ccd09 autotest: stop using MAVProxy to change modes 2021-02-18 17:38:52 +11:00
Peter Barker 628a3843b2 autotest: flake8 compliance for arduplane.py 2021-02-18 10:43:05 +11:00
Peter Barker a292fe1b8b autotest: use wait_statustext rather than mavproxy.expect
This is important when running under Valgrind as the text can be
significantly delayed.  wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
2021-02-17 18:16:04 +11:00
Peter Barker c00a82868e autotest: make DLVR sole airspeed sensor in test
The test wasn't actually *using* the DLVR...
2021-02-17 14:23:07 +11:00
Peter Barker ca49f62b6d autotest: add test for Plane's RTL_CLIMB_MIN parameter 2021-02-13 19:34:52 +11:00
Peter Barker d60fa86026 autotest: use set_map_from_rc more 2021-02-13 19:34:52 +11:00
Andrew Tridgell 3add045924 autotest: fixed accel/gyro threshold consistency for tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell fe7d933976 autotest: use delay_sim_time() in tempcal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 58b9cd2c6e autotest: added assert_reach_imu_temperature() abstraction 2021-01-21 13:09:21 +11:00
Andrew Tridgell 4c315b57ca autotest: run gyro/accel cal at non-reference temperature 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2cf7e7945c autotest: make tempcal debug output clearer 2021-01-21 13:09:21 +11:00
Andrew Tridgell 84dda13b42 autotest: use new learn param setup 2021-01-21 13:09:21 +11:00
Andrew Tridgell 30385fb8cb autotest: use set_parameters() in IMU temp cal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 327db46c15 autotest: added automatic testing of IMU Temperature calibration 2021-01-21 13:09:21 +11:00