Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
57,763 Commits 71 Branches 508 Tags 635 MiB
Commit Graph

270 Commits

Author SHA1 Message Date
Jonathan Challinger 9871b95586 AC_PosControl: fix dt sanity checking 2015-03-10 22:10:30 +09:00
Leonard Hall 7de5bccc93 AC_PosControl: remove THR_HOVER parameter 
Parameter is set by main code so no need to store to eeprom
 2015-03-06 14:02:46 +09:00
Leonard Hall 9866eaded1 AC_PosControl: rename p_alt_pos to p_pos_z 
Also pid_alt_accel to pid_accel_z
 2015-03-06 14:02:44 +09:00
Leonard Hall 349f1aeceb AC_PosControl: use 2-axis PI controller 2015-03-06 14:02:42 +09:00
Leonard Hall 8d4f0ec80c AC_PosControl: integrate PID input filter 2015-03-06 14:02:39 +09:00
Jonathan Challinger e9bbe062f3 AC_PosControl: modify accel_to_lean_angles to apply filters before yaw rotation 2015-02-24 16:41:03 +09:00
Randy Mackay 186337f18e AC_PosControl: rename xy_mode enum values 
Also added a few comments and fixed formatting
 2015-02-06 17:00:55 +09:00
Jonathan Challinger 3faca88423 AC_PosControl: allow control of xy rate constraint behavior 2015-02-06 17:00:48 +09:00
Robert Lefebvre 14d76d158a AC_AttitudeControl: Correct comment. 2015-02-03 14:55:30 +09:00
Randy Mackay 07a0388f25 AC_PosControl: move alt limit to set_alt_target_from_climb_rate 
The alt limit is instead enforced when the target is set using the
set_alt_target_from_climb_rate function
Also updated comments
 2015-01-30 14:13:52 +09:00
Robert Lefebvre 02f3f96310 AC_PosControl: Enable altitude limit checking. 2015-01-30 14:13:45 +09:00
Randy Mackay aeecc46f7b AC_PosControl: remove unnecessary set of desired_accel 
The desired_accel is set again 11 lines lower so this line did nothing.
 2015-01-14 16:23:26 +09:00
Jonathan Challinger 9ebd0e9960 AC_PosControl: reincarnate dead block of code 2015-01-14 16:20:17 +09:00
Jonathan Challinger a580cd83e8 AC_PosControl: Fill _vel_desired.z for reporting 2015-01-14 16:08:48 +09:00
Randy Mackay 2a5a133bbf AC_AttControl: remove deprecated trigger_xy method 2015-01-07 14:03:49 +09:00
Jonathan Challinger 557d339cf1 AC_PosControl: remove various unnecessary timing hacks 2014-12-31 14:03:18 +09:00
Jonathan Challinger d6e455417f AC_PosControl: change keep_xy_I_terms to a parameter of init_xy_controller 2014-12-31 14:03:13 +09:00
priseborough 12ea1d6e85 AC_AttitudeControl: Scale angle demand noise filter 
Scales filter frequency using EKF nav gain scaler to take advantage of the reduced nav frequency whichcan tolerate a slower angle response.
This is required to reduce the effect of EKF optical flow noise increase with height.
 2014-12-06 18:16:51 +11:00
priseborough e80b1c67cd AC_AttitudeControl: Add EKF optical flow noise gain scaler 
Allows gains to be adjusted to compensate for optical flow noise
 2014-12-06 18:16:50 +11:00
priseborough 2dff76394d AC_PosControl: Add spike and noise filter to demanded angles 
This has been done to provide a smooth psotion hold when using an optical flow aided EKF which can be noisy.

Signed-off-by: priseborough <p_riseborough@live.com.au>
 2014-12-06 18:16:49 +11:00
Jonathan Challinger bfe71fea82 AC_PosControl: Use blended accelerometer measurement in altitude control 2014-12-05 19:40:10 +09:00
Jonathan Challinger e81c1dd5a1 AC_PosControl: add force_descend option to set_alt_target_from_climb_rate 2014-11-13 18:40:38 -08:00
Randy Mackay ac7ea2a12c AC_PosControl: use AttControl's sqrt_controller 2014-10-27 15:20:48 +09:00
Jonathan Challinger 779baa006d AC_PosControl: Use sqrt_controller function 2014-10-27 15:20:44 +09:00
Randy Mackay a1cfd03c9b AC_PosControl: bug fix dt calculation 
fixes issue in which now could be earlier than _last_update_xy_ms
leading to a large dt value and a sudden lean on takeoff
 2014-10-21 11:40:47 +09:00
Jonathan Challinger 4a397a8d67 AC_PosControl: Protect from divide-by-zero in get_stopping_point_xy 2014-10-10 21:17:12 +09:00
Randy Mackay 1754cacf3c AC_PosControl: remove completed to-do comments 2014-10-04 23:49:24 +09:00
Randy Mackay cf3b2be99c AC_PosControl: 4hz filter on z-axis velocity error 2014-09-22 13:40:01 +09:00
Randy Mackay 665f353416 AC_PosControl: 2hz filter on accel error 
Replaced hard-coded filter with LowPassFilter class allowing the
filter's to be 2hz on both APM and Pixhawk
 2014-09-21 17:53:55 +09:00
Randy Mackay 1362bdc338 AC_PosControl: smooth take-off with accel PID's I term 
This avoids an instantaneous jump in throttle during take-off by loading
the accel PID's I term with the expected change in throttle level
 2014-08-04 21:04:09 +09:00
Randy Mackay 70568225a6 AC_PosControl: init members to resolve compiler warnings 2014-07-16 14:38:40 +09:00
Randy Mackay 9233bbab14 AC_PosControl: cast fabs to float to resolve compiler warnings 2014-07-16 14:38:38 +09:00
Jonathan Challinger 762bb3e6e8 AC_AttitudeControl: Limit _pos_target.z to below alt_max before computing error 2014-07-13 21:14:34 +09:00
Jonathan Challinger 5f66027ba3 AC_AttitudeControl: Fixup some minor mistakes in AC_PosControl 2014-07-13 17:17:31 +09:00
Randy Mackay 82ed70b25e AC_PosControl: add xyz velocity controller 
Velocity controller interpretsthe velocity requests as
desired velocities (i.e. feed forward).  These are then used to update
the target position and also added to the target velocity.
Also renamed the set_desired_velocity() function to
set_desired_velocity_xy() to make clear only lat and lon axis are
updated.
 2014-07-06 17:01:02 +09:00
Randy Mackay 4d4c7a2118 AC_AttControl: move freeze_ff to flags structure 2014-06-10 20:02:46 +09:00
lthall 8bbce7e658 AC_PosControl: freeze feed forward for alt control in Auto 2014-06-10 20:02:36 +09:00
lthall 0d87298221 AC_PosControl: freeze feed forward and vector fixes 2014-06-10 20:02:33 +09:00
Randy Mackay 2b0f142a17 AC_PosControl: fix typo in D-filter definition 2014-05-29 17:50:48 +09:00
Randy Mackay 29ca7a10df AC_PosControl: set alt hold accel control D term filter 2014-05-29 17:40:23 +09:00
Randy Mackay c13db680b7 AC_PosControl: remove reset_I_xy 
lean_angles_to_accel is now used to load the position rate I terms based
on vehicle's initial roll and pitch angle
 2014-05-08 16:15:48 +09:00
Randy Mackay cd8b1f278c AC_PosControl: remove unused _cos_yaw variable 
Also removed _sin_yaw, _cos_pitch, _step saving a total of 17bytes of
RAM
Also made get_speed_up, get_speed_down, lean_angles_to_accel functions
const
 2014-05-08 16:15:46 +09:00
Randy Mackay 0819e05896 AC_PosControl: lean_angles_to_accel added for smooth initialisation 
init_xy_controller also added to capture initialisation all in one place
 2014-05-08 16:15:41 +09:00
lthall 21c93e48ab AC_PosControl: include vel error when get_stopping_point_z 
Pair programmed with Randy
 2014-05-08 16:15:24 +09:00
Randy Mackay a1f1dd8059 AC_PosControl: add is_active_z method 
Consolidated z-axis timeout checks to save 4bytes of RAM
Added POS_CONTROL_ACTIVE_TIMEOUT_MS to make timeout consistent
 2014-05-08 16:15:22 +09:00
Randy Mackay 937e9ea687 AC_PosControl: add set_target_to_stopping_point_xy method 
Fixed bug in get_stopping_point_xy in which it would update Z-axis
target if vehicle was moving less than 10cm/s horizontally
 2014-04-30 21:46:20 +09:00
Randy Mackay 9f63de9b59 AC_PosControl: set_speed_z accepts positive descent speeds 2014-04-30 21:46:09 +09:00
Randy Mackay 098f8169b0 AC_PosControl: add keep_xy_I_terms method 
Stops horizontal PID's I terms from being reset when the controller is
next updated
 2014-04-23 15:00:12 +09:00
Ju1ien 6c71569775 AC_PosControl: update_xy_controller allows not resetting I term 2014-04-23 14:59:49 +09:00
Randy Mackay 09a35cf90f AC_PosControl: bugfix for freezing I-term build-up 2014-04-23 11:33:53 +09:00
Randy Mackay e565ee6d33 AC_PosControl: stop I term build-up when motors at max 2014-04-22 23:05:06 +09:00
Randy Mackay 6f6c9e2585 AC_PosControl: bug fix to vertical speed limit 
Vehicle was not reaching target climb or descent rate because of
incorrectly defaulted acceleration
 2014-04-21 21:36:02 +09:00
Randy Mackay 7e376bc517 PosControl: update_pos_controller renamed to update_xy_controller 2014-04-21 13:31:55 +09:00
Randy Mackay 90e205c905 AC_PosControl: replace safe_sqrt with pythagorous2 2014-04-01 20:43:51 +09:00
Randy Mackay dd45647626 AC_PosControl: update some comments re leash lengths 2014-03-17 10:13:02 +09:00
Holger Steinhaus 345115fddd AC_PosControl: fixed leash length calc for descent speed 2014-03-17 10:12:47 +09:00
jschall 024855014f AC_PosControl: update _pos_error if it is being limited 
This fixes a bug that causes 10hz throttle noise.
 2014-02-17 22:33:06 +09:00
Randy Mackay 9130c88f15 AC_PosControl: throttle rate to simple P controller 2014-02-16 13:35:44 +11:00
Randy Mackay 94fb9c4274 AC_PosControl: replace APM_PI with AC_P 2014-02-15 06:09:08 +11:00
Randy Mackay 8b8d6a8e01 AC_PosControl: use trig values from ahrs 2014-02-15 05:27:48 +11:00
Randy Mackay 551836c49d AC_PosControl: make some methods const 2014-02-15 05:27:40 +11:00
Randy Mackay 26b257c8ba AC_AttControl: alternative get_stopping_point_z 2014-02-15 05:27:39 +11:00
Randy Mackay 1b8791a142 AC_PosControl: remove debug 2014-02-15 05:27:39 +11:00
Randy Mackay de34359808 AC_PosControl: recalculate leash when speed or accel modified 2014-02-15 05:27:37 +11:00
Randy Mackay 80ae3dca2e AC_PosControl: remove debug 2014-02-15 05:27:36 +11:00
Randy Mackay bbcf8cc84c AC_PosControl: add horizontal pos control 2014-02-15 05:27:35 +11:00
Randy Mackay 3ce1c0a9d5 AC_PosControl: add get_alt_error method 2014-02-15 05:27:34 +11:00
Randy Mackay 8988b48ad8 AC_PosControl: add init take-off 2014-02-15 05:27:34 +11:00
Randy Mackay dcac124105 AC_PosControl: add throttle controller 2014-02-15 05:27:33 +11:00
Randy Mackay 05bb943a69 AC_AttControl: first draft of PosControl class 2014-02-15 05:27:33 +11:00