Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
3,070 Commits 71 Branches 509 Tags 789 MiB
Commit Graph

88 Commits

Author SHA1 Message Date
Jason Short 7e411f5fb6 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short 24b760d48f added update throttle cruise function 2012-01-13 16:48:05 -08:00
Jason Short 400d080d12 added notes 2012-01-12 22:28:58 -08:00
Jason Short 7933492fec Switched to set_next_WP for mode switches 2012-01-10 23:43:44 -08:00
Jason Short f240888b49 added #if to wind compensation code 2012-01-10 23:42:26 -08:00
Randy Mackay 7b9701fdd5 ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow) 
Removed optical flow from regular loiter for now until it's tested.
 2012-01-09 13:53:54 +09:00
Jason Short cf5e0b3a1b converted auto land to use the mission planner version 
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
 2012-01-07 22:27:26 -08:00
Jason Short 056a08d838 Forced Faildafe throttle mode to throttle Auto 2012-01-06 10:21:50 -08:00
Jason Short 9d9bef37a8 Clears Auto_land timer 2012-01-05 21:15:12 -08:00
Andrew Tridgell 600a5680f8 ACM: reset all I terms on gyro calibration 2012-01-05 10:15:14 +11:00
Jason Short 123ce533bb Added precalc for wind compensation when entering Stabilze mode 2012-01-04 09:28:37 -08:00
Jason Short a1c3ce88a0 calc_wind_compensation called when exiting AP modes 
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
 2012-01-04 09:28:37 -08:00
Andrew Tridgell 645eac6f38 I2c: default to 5ms timeout, and faster bus speed 
we will slow down the speed when we get a failure
 2012-01-04 16:36:47 +11:00
Randy Mackay ff66a3417c OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell c27277c7f1 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell ef1d8eaeac ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Andrew Tridgell da87622a5f removed "Please run setup" loop from ArduCopter 
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
 2011-12-24 18:12:51 +11:00
Jason Short a40a026220 added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Andrew Tridgell 1807585b98 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short 66c974a949 Added failsafe check 2011-12-14 22:08:41 -08:00
Andrew Tridgell c007fb49b8 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell dd4498d113 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Pat Hickey 067724b4f1 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey 6710cf5c5a Wire and SPI Init: move to sketch system.pde from libraries 
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
 2011-12-11 15:21:10 -08:00
Pat Hickey bd00b629e7 ArduCopter Init: different call to barometer.init based on CONFIG_BARO 
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
 2011-12-11 15:21:10 -08:00
Pat Hickey 273492bc66 ArduCopter: Revert "Switched to Gyro only startup" 
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.

I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.

It is no longer valid to call IMU::init_gyro() before IMU::init().
 2011-12-11 14:50:02 -08:00
Randy Mackay 26705111e1 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay 62a7b19600 Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short 146d52d650 Switched to Gyro only startup 2011-12-10 15:13:20 -08:00
Jason Short b659d35f18 Added Land FLight mode definition 2011-12-10 10:19:20 -08:00
Jason Short 11363a26cb Added new gain and clamp value for DCM 2011-12-03 17:55:11 -08:00
Andrew Tridgell 63126ece83 MAVLink: use the configured system ID for ArduCopter 2011-12-03 07:54:36 +11:00
Jason Short 8a1fcfd0f4 cleanup 2011-11-28 21:40:22 -08:00
Doug Weibel aa6c336479 Add DataFlash.Init before doing a forced log erase on eeprom reset. 
Add progress indication during log erase
 2011-11-28 19:42:27 -07:00
Jason Short d4a9808a61 Erasing Logs causing major havoc. Users getting infinite loop. 2011-11-28 10:33:05 -08:00
Jason Short afee053bac No longer resetting ch7 wp index with mode change, requires reboot 2011-11-27 22:23:02 -08:00
Jason Short a2857f9746 Erasing Logs at new FW version detection 2011-11-26 16:39:28 -08:00
Andrew Tridgell 1d66b075b0 ArduCopter: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell e297f0cb23 USB-MUX: enable USB MUX switching for ArduCopter 2011-11-25 20:00:19 -08:00
Andrew Tridgell c797794e3f ArduCopter-HIL: fixed HIL build 
Logging isn't always enabled
 2011-11-25 20:00:18 -08:00
Pat Hickey 8300e21a8c hil-sensors ArduCopter: fixes to make hil-sensors build work properly 
* requires new stub libraries for InertialSensor and PeriodicProcess.
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 01cfd64327 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell 8e9851c217 adc.Init() needs timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey d2f4fea58a remove BROKEN_SLIDER code 
use the new CLI_SLIDER_ENABLED option and the "hit ENTER 3 times"
method
 2011-11-25 20:00:17 -08:00
Pat Hickey 0f25ae0fd7 purple: fixed system init for purple sensor objects 2011-11-25 20:00:16 -08:00
Pat Hickey bc5a59e5fe purple: use the new LED_ON/LED_OFF macros for LED level 
this gets this right on both APM1 and purple for ArduCopter
 2011-11-25 20:00:16 -08:00
Andrew Tridgell 32073eaa51 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Jason Short 7f80649566 Added alternate alt hold, 
New ESC Calibration Routine
 2011-11-21 22:12:19 -08:00
Jason Short 180a851d2c removed the init_esc - reworking the method to avoid the use of the CLI. 2011-11-20 21:24:32 -08:00
Jason Short 5761b6b071 Logging stabilization KP to hunt bug 2011-11-19 16:59:54 -08:00