Robert Taylor
d82e82635f
hwdef: switch CAN port definiton on Nucleo-496 hwdef
...
The CAN port as it was is a valid CAN port for the nucleo, but on the development board the CAN silkscreen is actually on PD0 and PD1. This change makes it easier to get the example running on the Nucleo
2024-09-26 08:31:50 +10:00
Peter Barker
90b2a2acaa
hwdef: change HAL_NO_MONITOR_THREAD out for HAL_MONITOR_THREAD_ENABLED
...
... and use a default value for peripherals
2024-07-30 10:52:36 +10:00
Peter Barker
5fb4e1e285
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
2024-04-03 18:36:29 +11:00
Peter Barker
764f6863ea
hwdef: re-enable RCIN thread on some builds/boards
...
not because they need it, but to make a PR NFC
2024-04-03 18:36:29 +11:00
Andrew Tridgell
ea51aea2e5
hwdef: removed most CAN_APP_NODE_NAME defines
...
both bootloader and AP_Periph now default to
"org.ardupilot.BOARD_NAME". This makes it much easier to find the
right firmware for update
2023-09-06 11:21:51 +10:00
Peter Barker
b8978ad73a
hwdef: explicitly state no-bootloader-embedding on some boards
2023-08-17 08:37:31 +10:00
Peter Barker
10cb5d2151
hwdef: stop minimizing Nucleo-L496 - it's an AP_Periph
...
minimized builds and AP_Periph don't make sense together
2023-03-10 10:04:12 +11:00
Peter Barker
3f98e3aacb
hwdef: use an include file for boards requiring generic feature minimization
2022-10-11 10:23:19 +11:00
Andrew Tridgell
c9bbfd94c0
hwdef: set AUTOBUILD_TARGETS None on eval boards
2022-04-06 14:13:44 +10:00
Peter Barker
7abf07f233
hwdef: remove unused HAL_NO_GCS defines
...
This became HAL_GCS_ENABLED, off by default on Periph
2021-11-26 12:25:40 +11:00
Peter Barker
139c460fa5
hwdef: remove unused define NO_DATAFLASH
2021-11-24 18:18:06 +11:00
bugobliterator
8651d99de6
HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define
2021-10-30 19:24:57 +11:00
Andrew Tridgell
80836ca1d9
HAL_ChibiOS: simplify AP_Periph hwdef.dat
2021-10-26 15:56:53 +11:00
Andrew Tridgell
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
2021-10-26 15:56:53 +11:00
Andrew Tridgell
822e657a70
HAL_ChibiOS: increase PROCESS_STACK on several boards
...
use min of 0xA00 for AP_Periph. A larger stack is needed for parameter
fetching
2021-10-20 19:06:35 +11:00
Andrew Tridgell
6d093e56fb
HAL_ChibiOS: added Nucleo-L496 AP_Periph target
2021-09-24 18:08:00 +10:00