Jason Short
7fb641ab77
added note
2012-01-20 22:52:31 -08:00
Jason Short
127544b833
Added cast for comparison
2012-01-20 22:52:30 -08:00
Jason Short
5141534ea9
B3
2012-01-20 22:52:29 -08:00
Jason Short
db6db1ab91
set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units.
...
added the ability to force nav_throttle so we don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
2012-01-20 22:52:29 -08:00
Jason Short
6e94b21d67
Altitude no longer resets when moving loiter WP
2012-01-20 22:52:29 -08:00
Jason Short
017364fc5b
Lowered range to more sensible values
2012-01-20 22:52:29 -08:00
Michael Oborne
52a9bb3cd1
fix SITL attitude hil AC
2012-01-20 16:32:25 +08:00
Doug Weibel
ed9f7cb1b6
Update battery monitoring code for ArduCopter
...
Fixes compatibility for APM2. Also a significant update to the battery monitoring code: We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos. These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere). Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs. The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Doug Weibel
0306bf97a0
Just a little more commenting work on global variables
2012-01-15 16:11:02 -07:00
Jason Short
3ebed0b278
This allows users to test the Auto_throttle hold or cruise value
2012-01-14 11:43:52 -08:00
Jason Short
46ef246e67
b2
2012-01-14 11:37:00 -08:00
Jason Short
0ae82da0fd
Fix for SIMPLE mode
2012-01-14 11:32:48 -08:00
Jason Short
89343ae306
adjusted GPS watch dog not to be so aggressive,
...
removed unneeded flag clearing
2012-01-14 11:20:40 -08:00
Jason Short
ec9880f725
made resetting throttle cruise a function
2012-01-13 16:47:08 -08:00
Jason Short
8d909f6eed
fixed GPS bug - moved to fast loop location
2012-01-13 12:47:22 -08:00
Jason Short
b0810e054e
moved GPS routines to 50hz loop to avoid delay.
2012-01-12 22:59:47 -08:00
Jason Short
648a404ee1
Version 2.2
2012-01-12 22:37:33 -08:00
Jason Short
91e05834c8
removed wind comp code,
...
Added Landing boost code
2012-01-12 22:28:58 -08:00
Jason Short
a7bce15365
R10
2012-01-11 22:41:51 -08:00
Jason Short
f35411ac45
R9
2012-01-10 23:46:08 -08:00
Jason Short
5a91396f63
Added climb rate control
...
removed unused vars
2012-01-10 23:42:26 -08:00
Jason Short
351be7c305
Made timer unsigned
2012-01-10 23:42:26 -08:00
Pat Hickey
2f63c636ad
Rename ArduCopter/config_motors.h to config_channels.h
2012-01-09 21:57:02 -08:00
Pat Hickey
f5b6746ad7
ArduCopter: Change TRI_FRAME yaw servo output to CH_TRI_YAW define
2012-01-09 21:57:02 -08:00
Pat Hickey
0b40f55334
ArduCopter: include config_motors.h in sketch
2012-01-09 21:57:01 -08:00
Randy Mackay
f68d23d91e
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Jason Short
d45c0ce9f2
Added Acro to Rate_P
2012-01-08 14:52:10 -08:00
Jason Short
f4b530ebb1
R8
2012-01-07 22:28:03 -08:00
Jason Short
76dd79e7b5
Made RTL hold position until it reaches altitude
2012-01-07 22:27:26 -08:00
Jason Short
ee0551037e
Revved to R7
2012-01-06 10:22:53 -08:00
Jason Short
17873eb09c
Changed default throttle type for failsafe to avoid checking
...
changed timer to 20 seconds.
2012-01-06 10:20:31 -08:00
Jason Short
e116636fe9
Auto_land update
2012-01-05 21:57:34 -08:00
Jason Short
e3c16fc1b1
Added auto_land to RTL
2012-01-05 21:15:12 -08:00
Jason Short
20661e5020
timer set to unsigned
2012-01-04 17:31:20 -08:00
Andrew Tridgell
596a1f43f4
ACM-simple: don't use uninitialised simple trig values
2012-01-05 10:13:36 +11:00
Jason Short
ed1ff0b171
Upped Revision
2012-01-04 09:28:38 -08:00
Jason Short
76cfdca6cc
Cleaned up and documented each global vavriable
...
Added Wind compensation for Stability
Acro mode fixes
2012-01-04 09:28:37 -08:00
Jason Short
b3cea96970
Cosmetic
2011-12-31 10:54:31 -08:00
Jason Short
ea832c0818
upped to r5
2011-12-31 10:05:13 -08:00
Jason Short
1ef7f9fe62
Loiter I reset
2011-12-31 09:45:25 -08:00
Jason Short
0ace8474d7
R4
2011-12-30 23:54:02 -08:00
Jason Short
28984a72e4
no longer calling reset_nav
2011-12-30 23:48:04 -08:00
Jason Short
c7f93f8718
Updated Configs based on field testing.
2011-12-30 23:48:04 -08:00
Jason Short
84d3e3135f
Added Nav_bearing, just like APlane
...
added fix for LOITER in missions so we don't Yaw in circles
2011-12-30 23:48:04 -08:00
Jason Short
3ea49e1415
updated rev
2011-12-29 23:02:41 -08:00
Jason Short
95a70cf32e
lowered to nav_lat and nav_lon int16
...
added a version that didn't have I term added to get a better indication of velocity estimation
2011-12-29 23:02:03 -08:00
Jason Short
6f42442e57
Added 5 sec Takeoff Timer to clear i terms when lifting
...
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
2011-12-29 23:02:03 -08:00
Randy Mackay
bbe6dea980
OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
...
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell
955dfe0226
ACM: check compass health before using it
2011-12-28 20:41:53 +11:00
Andrew Tridgell
03a16c6e45
ACM: use new I2C library
2011-12-28 20:41:53 +11:00