rmackay9
e32e0b03b4
DigitalWriteFast: added keywords for syntax colouring in Arduino IDE
2012-11-22 12:25:57 +09:00
rmackay9
eb6d8fca57
ArduCopter: added ReleaseNotes.txt
2012-11-22 09:51:04 +09:00
Robert Lefebvre
6ffc115236
Changes to get_throttle_rate()
...
Commented out a bit of code that is not used currently
Change the output constrains to #defines so they can be easily changed, particularly for use in TradHeli.
2012-11-21 17:11:38 -05:00
Andrew Tridgell
dbdb3e1194
ACM: allow fetch of parameters by index
...
this makes it more efficient to re-fetch parameters that are missing
2012-11-22 00:16:57 +11:00
Michael Oborne
3e0f4345e7
firmware build
2012-11-21 19:33:46 +08:00
Andrew Tridgell
f8a95e4084
APM: preparing for 2.67 release
2012-11-21 22:28:30 +11:00
Andrew Tridgell
0dc8dd5394
SITL: run the timer_scheduler() when there are no SITL packets
...
otherwise we can block in the ADC code
2012-11-21 22:20:14 +11:00
Andrew Tridgell
a71c7b336d
Revert "APM_RC: Modified get_last_update() to be more interrupt friendly"
...
This reverts commit 50ba0ce4fa41c6d4101dff8da17c267a65750522.
It didn't build, and I want to do a release based on tested code
2012-11-21 21:48:02 +11:00
Andrew Tridgell
24adc1aaa3
Rover: make it possible to run the CLI over a radio link
2012-11-21 21:41:34 +11:00
Andrew Tridgell
bcae83c4f6
ACM: make it possible to run CLI on radio port in ArduCopter
2012-11-21 21:41:34 +11:00
Andrew Tridgell
84300c85d6
APM: make it possible to run the CLI on any serial port
2012-11-21 21:41:34 +11:00
Andrew Tridgell
11141d0af0
INS: make it possible to do accel cal on a different serial port
2012-11-21 21:41:34 +11:00
Andrew Tridgell
d44ceb3fa5
FastSerial: added a vprintf_P() function
...
used by CLI on UART2
2012-11-21 21:41:34 +11:00
Andrew Tridgell
ba4b9b9961
AP_Menu: allow menus to work on ports other than UART0
2012-11-21 21:41:34 +11:00
John Arne Birkeland
e194c6c740
APM_RC: Modified get_last_update() to be more interrupt friendly
2012-11-21 10:34:04 +01:00
Andrew Tridgell
704da2a5d9
MAVLink: make it possible to enter the CLI over the radio
...
this only works on the APM2, where UART0 is also the radio port
2012-11-21 14:11:05 +11:00
Andrew Tridgell
8f108e2eb3
APM: added AMP_OFFSET option
...
thanks to Alexey Kozin!
2012-11-21 13:34:27 +11:00
Andrew Tridgell
61f2e18e2e
APM: allow ailerons to move fully during servo demo
2012-11-21 13:34:27 +11:00
Andrew Tridgell
fcbd3a823b
APM: added a new type of auxilary aileron, with rc input
...
a AileronWithInput assumes you have setup your RC transmitter to give
the right trim and input on the secondary aileron
2012-11-21 13:34:26 +11:00
Andrew Tridgell
d2170230f4
RC_Channel: added aileron_with_input aux function
2012-11-21 13:34:26 +11:00
Michael Oborne
a5e3ce4655
remove cli planner mode - no longer used
2012-11-21 07:45:45 +08:00
Michael Oborne
0c84b8abf1
fix unit max. and unit type
2012-11-21 07:42:53 +08:00
Andrew Tridgell
07f5baea9e
SITL: added in recursion check in timer_handler()
2012-11-21 09:10:10 +11:00
Andrew Tridgell
833d433caf
Semaphore: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:31:23 +11:00
Andrew Tridgell
6836a986f3
PeriodicProcess: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:31:23 +11:00
Andrew Tridgell
f843705da3
INS: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:31:23 +11:00
Andrew Tridgell
e331634bc5
AP_Baro: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:31:17 +11:00
Andrew Tridgell
fc63087cb8
AnalogSource: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:31:09 +11:00
Andrew Tridgell
c1a02e49a0
ADC: switch to SREG = oldSREG pattern for interrupt mask/restore
2012-11-20 22:30:03 +11:00
Andrew Tridgell
ccb1f1722e
SITL: fixed a interrupt recursion bug
...
this can be triggered by the timer scheduler re-enabling interrupts
2012-11-20 22:29:26 +11:00
Andrew Tridgell
3c88b0d204
AP_Param: fixed Vector3f elements with 16 character names
2012-11-20 22:27:11 +11:00
Andrew Tridgell
800d1e8020
VARTest: remove old NAME_LENGTH limit
2012-11-20 21:39:25 +11:00
Andrew Tridgell
39836eabb2
Rover: support 16 character parameter names
2012-11-20 21:39:11 +11:00
Andrew Tridgell
bcf740a82f
ACM: support 16 character parameter names
2012-11-20 21:38:58 +11:00
Andrew Tridgell
a600ccece5
APM: support 16 character parameter names
2012-11-20 21:36:13 +11:00
Andrew Tridgell
b0713ba412
AP_Param: support up to 16 character parameter names
...
MAVLink allows for 16 chars, with no null termination if all 16 are
used
2012-11-20 21:35:22 +11:00
Andrew Tridgell
58a0cfc0b3
params: fixed ordering of vehicle parsing
...
this keeps it consistent in the wiki
2012-11-20 20:37:02 +11:00
Andrew Tridgell
4683df4a21
params: fixed parsing of value lists with -1 elements
2012-11-20 20:27:00 +11:00
Andrew Tridgell
c008ca7560
ACM: fixed documentation of disabling voltage/current pins for ArduCopter
2012-11-20 20:26:14 +11:00
Andrew Tridgell
a7e537d6c0
INS: set the acceptable calibration error equal on all axes
2012-11-20 19:28:49 +11:00
Andrew Tridgell
40fc0feaf9
INS: show calibration values on failure
...
this will help debug bad calibrations
2012-11-20 19:28:15 +11:00
Andrew Tridgell
a5ed0de2cf
APM: set MANUAL_LEVEL to 1 on successful accel calibration
2012-11-20 19:27:52 +11:00
Andrew Tridgell
85e050f16c
INS: get check for send_msg the right way around!
...
I broke this in my previous commit
2012-11-20 19:10:30 +11:00
Andrew Tridgell
fd3993287d
INS: disable accel calibration on the 1280
...
this would put us well over 128k in sketch size
2012-11-20 18:41:04 +11:00
Andrew Tridgell
9c811671f1
INS: make calibrate_accel() return a bool
...
this will allow APM to auto set MANUAL_LEVEL to 1
2012-11-20 18:32:27 +11:00
Andrew Tridgell
152c12c283
INS: fixed raw accel offset for APM1
...
we now get reasonable offset values
2012-11-20 18:32:27 +11:00
Andrew Tridgell
3776e6108f
INS: use vector subtraction to make code clearer
2012-11-20 18:32:27 +11:00
Andrew Tridgell
2f287846b5
APM: don't use mavlink msgs for accel cal in cli
2012-11-20 18:32:27 +11:00
Andrew Tridgell
3aeaf2ece6
APM: k_param_imu is now unused
2012-11-20 18:32:27 +11:00
Andrew Tridgell
69fbcc8683
MAVLink: fixed accel and gyro sensor offsets in MAVLink
2012-11-20 18:32:26 +11:00