Commit Graph

112 Commits

Author SHA1 Message Date
Michael du Breuil 69da4041ac Copter: Move logging battery logging code to AP_BattMonitor 2018-02-06 00:11:32 +00:00
Michael du Breuil 0ddcb0a6fb Copter: Support AP_BattMonitor_Params 2018-01-17 22:21:55 +00:00
Peter Barker 6bcdab55d0 Copter: rename sys_status methods from geofence_ to sys_status_ 2018-01-09 17:15:19 +00:00
Peter Barker 7222380598 Copter: populate system status bits for fence 2017-12-13 10:04:50 +09:00
Randy Mackay 9a03ba1bfb Copter: move barometer_accumulate to sensors.cpp
non-functional change
2017-11-22 17:13:14 +09:00
Randy Mackay 787954fa37 Copter: integrate winch library
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Michael du Breuil 516709fc72 Copter: Check GPS health 2017-09-27 19:29:32 +01:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 8df042f00c Copter: complete addition of SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Randy Mackay 34560fb1fb Copter: remove enabled check from optflow init 2017-08-23 11:19:14 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker f60389d4aa Copter: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
Randy Mackay cb76bd8f3d Copter: compass set-initial-location uses ahrs location
Previously it could attempt to use a gps location even if gps was not being used
Also compass-accumulate moved to sensors.cpp
2017-06-07 13:01:38 +09:00
Randy Mackay ec491d3c6b Copter: init_compass get g.compass_enabled check
No functional change
2017-06-07 10:34:13 +09:00
Leonard Hall 8def1d257e Copter: pass battery resistance estimate to motors 2017-06-06 14:57:04 +09:00
Randy Mackay 713c08672f Copter: integrate AP_VisualOdom 2017-04-19 11:04:40 +09:00
Randy Mackay 51c00f8144 Copter: use only downward facing rangefinder 2017-02-27 15:18:16 +09:00
murata 8f926bd177 Copter: Unify from print or println to printf. 2017-01-27 18:20:22 +11:00
Michael du Breuil 0fec4af54b Copter: Support the SYS_STATUS_SENSOR_BATTERY bit 2017-01-25 09:26:19 +09:00
Randy Mackay af514eb101 Copter: remove some comments 2017-01-23 15:07:20 -08:00
Dmitry Prokhorov 3e993f955e ArduCopter: Support for OLED display by Alexey Kozin 2017-01-23 15:07:20 -08:00
Andrew Tridgell 0f6d0c5ba9 Copter: combined tri, single, coax and multicopter into a single build
this allows copter to be just 2 builds, one for heli, and one for
everything else
2017-01-12 17:39:37 +11:00
Randy Mackay 21c7ea1df7 Copter: integrate AP_Beacon 2016-11-30 17:56:55 +09:00
Andrew Tridgell 2ed32a3ac0 Copter: added raw RFND logging 2016-11-21 10:30:12 +11:00
Peter Barker 236b8ab6b7 Copter: make EPM a subclass of AP_Gripper_Backend 2016-11-05 10:20:39 +09:00
Peter Barker 920868145c Copter: support for AP_Gripper 2016-11-05 10:20:33 +09:00
floaledm aa8cae82b0 Copter: redo of commit b24d850695 2016-10-30 11:46:39 -02:00
floaledm 34718b130a Copter: update sensor status error flags independently of sending a sys_status message
Without this, there is no update to the sensor status flags in the Frsky
lib unless there's an active Mavlink connection configured to send
extended_status1
2016-10-28 10:03:38 +11:00
Andrew Tridgell e8b9c815fc Copter: updates for EKF API changes 2016-10-27 17:09:06 +11:00
priseborough 209e364190 Copter: Add body position offset to optical flow interface 2016-10-27 14:54:42 +11:00
Michael du Breuil 790ddeb04e Copter: Use the compass calibrator autoreboot behaviour
(fixes a chance of not saving the second compass)
2016-10-27 14:04:33 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Randy Mackay 0aab175051 Copter: move proximity to g2 2016-10-14 14:02:29 +09:00
Randy Mackay fcc2a1b378 Copter: integrate AP_Proximity into main vehicle 2016-10-13 20:21:07 +09:00
Jonathan Challinger a393bd26d7 Copter: add stick gesture to begin compass calibration 2016-10-05 16:29:02 +09:00
Andrew Tridgell cb5ca713a9 Copter: added AP_Button support 2016-07-22 15:01:20 +10:00
Randy Mackay 5461002eea Copter: read rangefinder at 20hz 2016-05-21 10:36:53 +09:00
Randy Mackay e489c3184c Copter: rangefinder.enabled false if no range finders are configured 2016-05-21 10:36:53 +09:00
Randy Mackay 59070653cc Copter: provide filtered range finder altitude to AC_WPNav 2016-05-21 10:36:53 +09:00
Randy Mackay 5ac13c0355 Copter: move rangefinder variables into structure
moved in rangefinder_alt, rangefinder_alt_health and rangefinder_enabled
2016-05-21 10:36:53 +09:00
Randy Mackay c7f80324fa Copter: tilt correct rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay ba38b0234f Copter: use rangefinder class's valid_range_count
Also read_rangefinder directly updates rangefinder_alt variable instead of returning distance
No functional change
2016-05-21 10:36:53 +09:00
Randy Mackay 949d5f7109 Copter: add rangefinder_alt_ok
Reduces some duplicate code,no functional change.
2016-05-21 10:36:53 +09:00
Randy Mackay 7689315ba2 Copter: rename sonar to rangefinder 2016-05-21 10:36:53 +09:00
Randy Mackay 028946ae9e Copter: rename CONFIG_SONAR to RANGEFINDER_ENABLE 2016-05-21 10:36:53 +09:00
Jonathan Challinger d916413a15 Copter: add CAL_ALWAYS_REBOOT option 2016-01-08 11:58:41 +09:00
bugobliterator 9a976963aa Copter: support AP_AccelCal 2015-12-29 10:46:34 -08:00
Robert Lefebvre 9848d05a9d Copter: Always send RPM data when sensor is enabled 2015-12-08 08:25:18 +11:00
Lucas De Marchi 2591261af6 Global: rename min and max macros to uppercase
The problem with using min() and max() is that they conflict with some
C++ headers. Name the macros in uppercase instead. We may go case by
case later converting them to be typesafe.

Changes generated with:

	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)max(/\1MAX(/g'
	git ls-files '*.cpp' '*.h' -z | xargs -0 sed -i 's/\([^_[:alnum:]]\)min(/\1MIN(/g'
2015-12-01 16:28:09 -02:00
Luis Vale Gonçalves 3199829d45 Copter: revisions to text strings sent to GCS 2015-11-27 16:16:58 +09:00
lvale 549695181c Copter: revised and uniformization of severity messages 2015-11-05 12:20:49 +09:00
Lucas De Marchi 6f4904189b Replace use of println_P() with println() 2015-10-30 14:35:22 +09:00
Lucas De Marchi 84da1f5039 Rename gcs_send_text_P to gcs_send_text 2015-10-30 14:35:07 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Jonathan Challinger 7d67a00aa3 Copter: add compass_cal update function 2015-09-03 16:59:12 +10:00
Stewart Loving-Gibbard 7cb494d8e2 Copter: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more.
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
2015-08-29 08:05:59 +10:00
squilter 767b4da5b6 Copter: update send text severities 2015-08-25 14:05:25 +09:00
Andrew Tridgell 80ad9aa605 Copter: added RPM dataflash logging 2015-08-12 15:03:50 +10:00
Andrew Tridgell 1fdf7ec83f Copter: added RPM sensor support
send result via MAVLink
2015-08-12 15:03:50 +10:00
Randy Mackay 82ad454864 Copter: log sonar_alt even when disabled 2015-06-17 12:46:55 +10:00
Andrew Tridgell 278883c521 Copter: finished conversion to .cpp files
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2015-05-30 15:21:19 +09:00
Andrew Tridgell 356ece3402 Copter: rename .pde files to .cpp files 2015-05-30 15:21:15 +09:00