Peter Barker
|
a9621ed802
|
AP_Compass: remove HIL support
|
2021-06-15 09:47:31 +10:00 |
Peter Barker
|
304bc2bc13
|
AP_Baro: remove HIL support
|
2021-06-15 09:47:31 +10:00 |
Peter Barker
|
00002b78a4
|
AP_Airspeed: remove HIL support
|
2021-06-15 09:47:31 +10:00 |
Peter Barker
|
ee0a373b60
|
AP_AHRS: remove HIL support
|
2021-06-15 09:47:31 +10:00 |
Peter Barker
|
278dc4a09b
|
AP_BattMonitor: add cells 13 and 14 for SITL only
Allows for testing higher-cell-count scenarios
|
2021-06-15 09:46:26 +10:00 |
Peter Barker
|
bf10b454d1
|
AP_BattMonitor: add assertion to avoid memory over-read
|
2021-06-15 09:46:26 +10:00 |
Peter Barker
|
4a8f7d232a
|
SITL: add accessor for battery voltage
|
2021-06-15 09:46:26 +10:00 |
Peter Barker
|
cb8ff51b4d
|
SITL: add maxell to i2c bus and make it 14-cells
|
2021-06-15 09:46:26 +10:00 |
Peter Barker
|
bf9937489b
|
AP_BattMonitor: switch to Log_Write for BCL2
Just for the flash savings on smaller boards
|
2021-06-15 09:46:26 +10:00 |
Peter Barker
|
61fda691f2
|
autotest: add trivial test for smart battery logging
|
2021-06-15 09:46:26 +10:00 |
Dr.-Ing. Amilcar do Carmo Lucas
|
85666959ea
|
AP_BattMonitor: Increase the max. nr. of supported battery cells from 12 to 14
Uses a second message, because the original message does not support any more fields
|
2021-06-15 09:46:26 +10:00 |
Iampete1
|
6eab9b9c15
|
plane: quadplane: skip QPOS_POSITION1 on tailsitters
|
2021-06-15 09:25:58 +10:00 |
Peter Hall
|
85743be4f3
|
Revert "Plane: cope with Q pitch limit larger than fixed wing limit"
This reverts commit 74da3c74ac .
|
2021-06-15 09:25:58 +10:00 |
Iampete1
|
4df09360ab
|
AP_Scripting: add SN-GCJA5 particle sensor example
|
2021-06-15 09:04:32 +10:00 |
Peter Barker
|
c43965f32e
|
GCS_MAVLink: correct decimation of SENSOR_STATUS message
static infers shared between all backends
|
2021-06-15 07:07:39 +10:00 |
Hwurzburg
|
e958306343
|
Plane: Add options to USE_REVERSE_THRUST to cover all flight modes
|
2021-06-15 07:05:02 +10:00 |
Rishabh
|
08b8a43ab5
|
AC_PrecLand: Use rotate_xy instead of matrix multiplication
|
2021-06-14 15:59:52 +09:00 |
Rishabh
|
53bd545fac
|
AC_PrecLand: Account for vertical camera offset in alt calculations
|
2021-06-14 15:59:52 +09:00 |
Rishabh
|
f1e4f6dbc8
|
AC_PrecLand: Initialize EKF before using its output
|
2021-06-14 15:59:52 +09:00 |
murata
|
55c07e24c0
|
AP_Scheduler: Change the Task Performance Notification Level to Information
|
2021-06-13 22:47:24 -07:00 |
Josh Henderson
|
566621e2ba
|
AP_Math: SCurve check direction.length_squared is_zero
|
2021-06-14 13:26:44 +09:00 |
Peter Barker
|
e0284bb66a
|
mavlink: move submodule reference forward to master
|
2021-06-14 13:46:11 +10:00 |
nkruzan
|
9c3f99bb52
|
readme: change wiki discussion link from gitter to discord
|
2021-06-14 10:55:33 +09:00 |
Randy Mackay
|
602091bba6
|
Rover: 4.1.0-beta4 release notes
|
2021-06-14 10:11:57 +09:00 |
Randy Mackay
|
81e82f75c6
|
Copter: 4.1.0-beta4 release notes
|
2021-06-14 10:11:33 +09:00 |
Peter Barker
|
f780a5c358
|
AP_HAL_ChibiOS: fix infinite loop for large SPI transfers
len is 32 bits; i may integer-wrap back to zero at 65535+1
|
2021-06-14 09:13:49 +10:00 |
Hwurzburg
|
4f48233b43
|
ArduPlane: add QRTL always as Q_RTL_MODE option
|
2021-06-14 09:08:20 +10:00 |
Hwurzburg
|
cc0f850eb9
|
AP_Vehicle: add QRTL always as Q_RTL_MODE option
|
2021-06-14 09:08:20 +10:00 |
Andrew Tridgell
|
80afba3bd2
|
Plane: updated release notes for 4.1.0beta1
|
2021-06-14 08:25:05 +10:00 |
Andrew Tridgell
|
0c8e81964e
|
Plane: reset yaw controller on entry to POSITION1
this fixes a yaw change when we finish landing approach in
QRTL. Thanks to Henry for noticing this
|
2021-06-14 07:53:32 +10:00 |
Peter Barker
|
ce4ca0ac08
|
AP_InternalError: specify size for error_t
|
2021-06-13 08:41:25 +10:00 |
Andrew Tridgell
|
4307390820
|
Plane: fixed distance threshold for vtol land
|
2021-06-13 07:50:02 +10:00 |
Andrew Tridgell
|
f19b604a0c
|
AP_Math: added xy() method on Vector3
useful for getting xy length
|
2021-06-13 07:50:02 +10:00 |
Andrew Tridgell
|
f749c2c3ad
|
Plane: fixed issue with overspeed in QPOS_POSITIION1
this fixes the backflip issue on the convergence that Henry found
|
2021-06-13 07:50:02 +10:00 |
Peter Barker
|
d9e3526bd2
|
AP_HAL_SITL: correct compilation for mission pread/pwrite ret check
|
2021-06-12 16:02:51 +10:00 |
Rishabh
|
9a1a748348
|
AC_Avoid: Change ALT_MIN param to be copter only
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
b9fbf1a661
|
AP_Math: Update segment_to_segment_dis test
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
730cf0ad9b
|
AC_Avoid: Add deadzone param to avoidance backaway
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
b301bd0ca4
|
AC_Avoid: Use plane intersection in prox stop mode
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
547f0efd57
|
AP_Math: Add segment to plane intersection function
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
cb911a01e2
|
AP_Prox: Add plane intersection code to closest_point_from_segment_to_obstacle
|
2021-06-12 13:31:52 +09:00 |
Josh Henderson
|
206a414553
|
AP_Common: Location vec3 constructor zero out fields
|
2021-06-12 10:52:36 +09:00 |
Patrick José Pereira
|
9211f6d351
|
Tools: Add navigator board in common boards
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
|
2021-06-11 14:43:48 -04:00 |
Pierre Kancir
|
d2278fb525
|
AP_AHRS: NavEKF: make set_origin and get_origin WARN_IF_UNUSED as base class
|
2021-06-12 00:01:23 +10:00 |
Peter Barker
|
cea0d7c971
|
autotest: move autotest tlog files into buildlogs directory
|
2021-06-11 22:14:11 +10:00 |
Pierre Kancir
|
1fdef751ad
|
AP_Navigation: make crosstrack_error_integrator pure virtual as nobody use the base class
|
2021-06-11 04:59:06 -07:00 |
Peter Barker
|
e77512ba08
|
autotest: add method to create simple relative-to-home mission
|
2021-06-11 16:59:51 +10:00 |
Peter Barker
|
14b2af84ab
|
autotest: break out a home_relative_loc_ne for getting a home-rel loc
|
2021-06-11 16:59:51 +10:00 |
Peter Barker
|
96e14d470a
|
autotest: retry SITL connect many times while running under GDB
Allows for easier debugging under gdb when checking startup code
|
2021-06-11 11:15:58 +10:00 |
Peter Barker
|
0b517cfc57
|
autotest: start GDB in tui mode by default
|
2021-06-10 20:52:48 +10:00 |