Andrew Tridgell
2ab3d2c080
OpticalFlow: fixed line endings
...
this library was a mixture of dos and unix line endings, which makes
for very messy editing
2012-03-11 15:37:07 +11:00
Andrew Tridgell
cb96dd975f
Compass: update the compass driver to use the new vector.rotate() method
2012-03-11 15:37:07 +11:00
Andrew Tridgell
55aa43a70d
Math: added a test suite for the new rotation methods
2012-03-11 15:37:07 +11:00
Andrew Tridgell
289c64c0b9
Math: added vector3.rotate() and matrix3.rotation() methods
...
these operate on a "enum Rotation" which defines a set of standard
rotations. These are much faster than our previous method, plus use
less memory
2012-03-11 15:37:07 +11:00
Jason Short
62c2aa4924
ACM: Added Loiter D tuning
2012-03-10 14:17:57 -08:00
Jason Short
cb8729109c
ACM: Added Loiter_D for tuning as #23
2012-03-10 14:17:16 -08:00
Jason Short
0671bb9168
ACM: Firmware rev
2012-03-10 12:45:03 -08:00
Jason Short
f9d0dc9daa
ACM: disabled auto_calibration until more testing can be done
2012-03-10 12:44:49 -08:00
Jason Short
5ad7320505
ACM: changed alt hold initialization of altitude to be immediate
2012-03-10 12:44:18 -08:00
Jason Short
450f89ec5d
ACM: Added note about scaling rates
2012-03-10 12:43:28 -08:00
Jason Short
eb53200179
ACM: Altered the scaling speed for altitude changes for faster rises.
2012-03-10 12:43:01 -08:00
Jason Short
204f9957b0
ACM: Added force_new_altitude call to do immediate changes in altitude and no gradual changes.
2012-03-10 12:42:22 -08:00
Jason Short
83729d0f75
ACM: decreased rate P for alt hold to remove bumpy repsonse
2012-03-10 12:41:06 -08:00
Jason Short
220d5a1c6e
ACM: Increased the altitude error P for smoother alt hold response
2012-03-10 12:40:44 -08:00
Jason Short
4b703e8842
decreased the loiter rate P for overshoot
2012-03-10 12:40:07 -08:00
Jason Short
fc32da0d2e
ACM: increased the available rate error constrain, it was too low
2012-03-10 12:39:16 -08:00
Jason Short
bd4835a1b2
ACM: removed the experiment for rate error.
2012-03-10 12:38:29 -08:00
Jason Short
29d6085bab
added Force_new_altitude call for alt hold
2012-03-10 12:37:54 -08:00
Jason Short
4ba600c0c5
upped throttle manual boost to 225
2012-03-10 12:37:28 -08:00
rmackay9
afc4aceb32
ArduCopter - fixed small compile warning about unused x_iterm and y_iterm in navigation.pde
2012-03-11 01:27:58 +09:00
rmackay9
c7480f2281
ArduCopter - fix to dataflash logging of Mag heading
2012-03-11 01:27:29 +09:00
Andrew Tridgell
ba8e764349
SITL: lower the noise and drift levels for general autotest usage
2012-03-10 10:34:34 +11:00
Andrew Tridgell
b02ca58901
InertialSensor: fixed HIL build
2012-03-10 10:34:34 +11:00
Andrew Tridgell
44ebb20329
MAVLink: bring the v1.0 MAVLink in sync with 0.9
2012-03-10 10:34:34 +11:00
Andrew Tridgell
87c463bcc7
DCM: after some experimentation, raise the ki values a bit
...
this tracks the max gyro drift more accurately
2012-03-10 10:34:34 +11:00
Andrew Tridgell
eff6778515
Quaternion: use gyro drift value from sensor driver
2012-03-10 10:34:34 +11:00
Andrew Tridgell
3989fe2c2c
Quaternion: go back to the full update_MARG()
...
the separate drift controller is too erratic on yaw hold to be usable
at the moment
2012-03-10 10:34:34 +11:00
Andrew Tridgell
c8189c80d4
SITL: cleanup the gyro drift calculations
...
use units that are more easily understood
2012-03-10 10:34:34 +11:00
Andrew Tridgell
b833190abb
Quaternion: make the quaternion test more generic
...
works with DCM too
2012-03-10 10:34:33 +11:00
Andrew Tridgell
2f9af05cfa
Quaternion: update to get_gyro_drift() interface
2012-03-10 10:34:33 +11:00
Andrew Tridgell
bf16b2926c
Quaternion: removed some unused variables
2012-03-10 10:34:33 +11:00
Andrew Tridgell
d75e883fe8
GCS: get_integrator() is now get_gyro_drift() in DCM
2012-03-10 10:34:33 +11:00
Andrew Tridgell
3b2609c441
DCM: separate out the omega_yaw_P from omega_P
...
this cleans up the separation of drift rates and proportional
correction from yaw source and accelerometers, allow the yaw
to run at a different rate to the accel correction
2012-03-10 10:34:33 +11:00
Andrew Tridgell
bcb7196680
IMU: added get_gyro_drift_rate() interface
...
this just calls down to the InertialSensor layer
2012-03-10 10:34:33 +11:00
Andrew Tridgell
9296ac494d
AP_InertialSensor: added a get_gyro_drift_rate() interface
...
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
Andrew Tridgell
882fa1818b
DCM: removed the limit on linear acceleration
...
we get linear accelerations of more than 1g when turning corners
2012-03-10 10:34:33 +11:00
Andrew Tridgell
9a06d35772
make 'ENABLE' and 'ENABLED' mean the same things
...
users get this wrong far too often!
2012-03-10 10:34:33 +11:00
Andrew Tridgell
801a442ffb
Quaternion: minor tuning
2012-03-10 10:34:33 +11:00
Andrew Tridgell
3344869285
DCM: minor tuning based on testing my quad
2012-03-10 10:34:33 +11:00
Andrew Tridgell
dffb435aac
SITL: make the yaw match the APM conventions
2012-03-10 10:34:33 +11:00
Andrew Tridgell
2673614f6d
SITL: fixed the pwm output on startup
2012-03-10 10:34:33 +11:00
Andrew Tridgell
982712d58f
Quaternion: code cleanups and added comments
2012-03-10 10:34:32 +11:00
Andrew Tridgell
f405477875
DCM: code cleanup and added more comments
2012-03-10 10:34:32 +11:00
Andrew Tridgell
9dc08b30cd
Quaternion: bumb up gyro drift limit to match DCM
2012-03-10 10:34:32 +11:00
Andrew Tridgell
828ad7625b
ACM: removed the ADC filtering code
2012-03-10 10:34:32 +11:00
Andrew Tridgell
f9394f8068
ADC: removed the ADC level accel smoothing
...
the quaternion code does a better job of handling this noise than this
filter does
2012-03-10 10:34:32 +11:00
Andrew Tridgell
8b40c44522
Quaternion: separate out drift correction from main updates
2012-03-10 10:34:32 +11:00
Andrew Tridgell
3e960f8ef9
InertionSensor: update for new Ch6() interface
2012-03-10 10:34:32 +11:00
Andrew Tridgell
919874f2a0
IMU: fixed a warning
2012-03-10 10:34:32 +11:00
Andrew Tridgell
4dff78b9c0
GPS: expose last_fix_time
2012-03-10 10:34:32 +11:00