Michael du Breuil
382cbb9b4d
AP_Airspeed: Sanity check DLVR raw data before accumulating it
...
This is intended to help with really bad RF interference flipping bits on the I2C bus which can lead to some intresting results
2022-02-09 09:00:22 +11:00
murata
629469acbf
AP_Airspeed: remove duplicated words from comments
2022-02-07 08:24:14 +09:00
Peter Barker
2d0d2a123d
AP_Airspeed: move Airspeed up to AP_Vehicle, use dummy class for Copter
2022-01-19 18:21:32 +11:00
Josh Henderson
1831a1a009
AP_Airspeed: NFC add note about TYPE 0 index
2022-01-19 18:21:32 +11:00
Josh Henderson
bf65b2eba8
AP_Airspeed: move default type for SITL to be for only Plane
2022-01-19 18:21:32 +11:00
Joshua Henderson
3cfbad0f4d
AP_Airspeed: add AP_AIRSPEED_ENABLED
2022-01-19 18:21:32 +11:00
Peter Barker
3969d6d56f
AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C
...
These are in celsius
2022-01-13 18:31:46 +11:00
Hwurzburg
7c6816ec70
AP_Airspeed: change UAVCAN in metadata to DroneCAN
2021-12-15 09:53:21 +11:00
Peter Barker
f9580c0dfe
AP_Airspeed: add date for parameter conversion code
2021-11-23 12:27:14 +00:00
Josh Henderson
ea4c3d68d6
AP_Airspeed: make MAV_SEVERITY levels higher
2021-11-03 18:06:48 -07:00
Iampete1
89c0a8ea04
AP_Airspeed: use floats for get/set output scaled
2021-10-20 18:29:58 +11:00
Hwurzburg
b327f80946
AP_Airspeed: do not cal if backend does not exist
2021-10-07 13:36:44 +11:00
Iampete1
0731af751a
AP_Airspeed: analog: check valid pin
2021-10-06 18:42:51 +11:00
Peter Barker
22e9ad4818
AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Andrew Tridgell
f65620f4f3
AP_Airspeed: allow for an AIRSPEED list in hwdef.dat
...
this saves a lot of flash by only including specific drivers
2021-09-21 13:51:40 +10:00
Josh Henderson
c454cea401
AP_Airspeed: fix MS5525 driver to allow copying driver to 64bit SITL
2021-09-21 09:30:58 +10:00
Peter Barker
16c11fc4fa
AP_Airspeed: allow zero offset if we are skipping calibration
2021-09-15 17:52:34 +10:00
Peter Barker
2be49cb42b
AP_Airspeed: fix examples for AP_AHRS_DCM becoming backend
2021-08-31 14:28:53 +10:00
Andrew Tridgell
3f67917c26
AP_Airspeed: check for baro baro data in SDP3X
...
this matters for SDP3X as AP_Periph sensor with no baro
2021-08-10 07:10:02 +10:00
Andrew Tridgell
cbf549b1eb
AP_Airspeed: fixed display of ARSPD_DEVID when ARSPD2_TYPE=0
2021-07-21 18:22:11 +10:00
Andrew Tridgell
5f87335325
AP_Airspeed: review updates
...
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2021-07-12 17:14:59 +10:00
Andrew Tridgell
70bb470eb0
AP_Airspeed: fixed AP_Periph build
2021-07-12 17:14:59 +10:00
Andrew Tridgell
0bdd8231cf
AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction
...
if the MS4525 has its own LDO then we are should disable the
correction
2021-07-12 17:14:59 +10:00
Andrew Tridgell
ca1508b02e
AP_Airspeed: added DEVID parameters for airspeed
...
this makes log analysis easier
2021-07-12 17:14:59 +10:00
Andrew Tridgell
7f85b413f2
AP_Airspeed: use GCS_SEND_TEXT instead of printf for sensor probe messages
2021-07-12 17:14:59 +10:00
Andrew Tridgell
e6c7970a19
AP_Airspeed: support 3 I2C addresses for MS4525
...
and if bus number is configured then use only that bus number,
otherwise probe all buses as per existing behaviour
2021-07-12 17:14:59 +10:00
Peter Barker
6da68e39f8
AP_Airspeed: add rc channel option to disable all airspeed sensors
2021-06-23 15:13:13 +10:00
Michael du Breuil
29d6900888
AP_Airspeed: Remove unneeded initilization
...
We pre zero all memory
2021-06-22 10:08:02 +10:00
Peter Barker
00002b78a4
AP_Airspeed: remove HIL support
2021-06-15 09:47:31 +10:00
QioTek
0190a42e47
AP_Airspeed: added ASP5033 driver
2021-03-28 07:50:34 +11:00
Andrew Tridgell
ea57b1982f
AP_Airspeed: cope with no temperature on MSP airspeed
2020-12-08 20:41:12 +11:00
Andrew Tridgell
2d75ef4f60
AP_Airspeed: handle INT16_MIN temperature for UAVCAN sensor
2020-12-08 20:41:12 +11:00
Andrew Tridgell
73fda4e6a7
AP_Airspeed: cope with zero ratio in SDP3X driver
...
needed for AP_Periph
2020-12-08 20:41:12 +11:00
Andrew Tridgell
857d905d9f
AP_Airspeed: added MSP backend
2020-12-08 20:41:12 +11:00
Peter Barker
de2802e322
AP_Airspeed: populate airspeed_raw for sensors returning airspeed reading
...
Without this ARSP[x].Airspeed isn't populated
2020-12-08 11:59:49 +11:00
Hwurzburg
615b8add8c
AP_Airspeed: add inflight airspeed cal rc switch
2020-11-25 21:30:15 +11:00
Peter Barker
8647dda8a9
AP_Airspeed: add and use instance number to ARSP message
2020-11-24 12:19:45 +11:00
Iampete1
7aad83ccca
AP_Airspeed: add MATLAB based NMEA sensor example
2020-10-27 11:24:49 +11:00
Iampete1
0e41b821e8
AP_Airspeed: defualt to type none on sub
2020-10-27 11:24:49 +11:00
Iampete1
2aff8787c1
AP_Airspeed: add NMEA water speed backend
2020-10-27 11:24:49 +11:00
Iampete1
662d4640ef
AP_Airspeed: add dedicated MAX_WIND param
2020-10-27 11:21:04 +11:00
Pierre Kancir
52898cfdbd
AP_Airspeed: remove size warning on SDP3X crc function.
...
Clang-Tidy: Loop variable has narrower type 'uint8_t' (aka 'unsigned char') than iteration's upper bound 'unsigned int'
2020-10-14 07:52:02 +11:00
Andrew Tridgell
505953bdb2
AP_Airspeed: added get_num_sensors()
2020-08-27 20:20:51 +10:00
Andrew Tridgell
a20d3fed94
AP_Airspeed: allow hwdef override of airspeed default type
2020-08-25 09:59:15 +10:00
Siddharth Purohit
d65b43795a
AP_Airspeed: move to using CANManager library
2020-08-19 17:31:09 +10:00
Josh Welsh
eb4b5fb720
AP_Airspeed: Add additional DLVR support 20inH2O 30inH2O 60inH2O
2020-08-12 08:02:49 +10:00
Henry Wurzburg
21940cea09
AP_Airspeed: fix airspeed messages for consistency
2020-07-21 09:41:05 +10:00
Michael du Breuil
ceb0a9c827
AP_Airspeed: Rearrange state to save memory
...
Saves 8 bytes per airspeed sensor (2 backends for 8 total), and removes
the unneeded width specifier, which has no impact on used memory, and
saves us 88 bytes of flash because we don't have to do work to shift the
bits around.
2020-05-06 18:15:08 +10:00
Andrew Tridgell
40f1b5f9ae
AP_Airspeed: use GCS_SEND_TEXT()
2020-04-29 07:36:55 +10:00
Peter Barker
6046aa3625
AP_Airspeed: rename APMrover2 to Rover
2020-04-14 09:50:34 +09:00