ssq870424
07d3f2a3c5
Copter: add support for singlecopter airframe
...
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
2013-11-12 23:40:27 +09:00
Andrew Tridgell
6b1f59372c
Copter: show git and firmware version in tlog
2013-11-09 10:09:20 +11:00
Andrew Tridgell
b41f4898e0
Copter: report INS health
2013-11-07 12:48:17 +11:00
Randy Mackay
65980ace68
Copter: remove some commented out send_text code
2013-10-30 13:44:56 +09:00
Andrew Tridgell
2016bf1f31
Copter: fixed HIL build
2013-10-28 18:35:39 +11:00
Andrew Tridgell
a44e3191df
Copter: fixed baro-only preflight cal
...
this was causing a full level, which mucked up the INS calibration
2013-10-28 16:54:32 +11:00
Tobias
7564cc02af
Copter: use const refs instead of unneeded copies
2013-10-27 13:41:06 +09:00
Randy Mackay
d86ac9041e
Copter: report RC receiver health to GCS
2013-10-24 16:32:55 +09:00
Andrew Tridgell
92bf4b9c89
Copter: added MAVLink SYSTEM_TIME message
2013-10-24 14:22:47 +11:00
Randy Mackay
8ea3e68620
Copter: bug fix for loading missions while armed
2013-10-23 14:12:03 +09:00
Michael Oborne
78c4e03fd5
sensor hil fix
2013-10-19 23:04:22 +09:00
Randy Mackay
32f53624d6
Copter: rename low_battery to failsafe.battery
2013-10-13 13:52:52 +09:00
Andrew Tridgell
3b9566bc09
Copter: support MAV_CMD_DO_SET_CAM_TRIGG_DIST
2013-10-11 21:40:57 +11:00
Randy Mackay
09de917b27
Copter: mavlink ext status to use abs pressure
2013-10-04 13:20:58 +09:00
Randy Mackay
a33060b66d
Copter: mavlink extended status gps bit not-healthy when glitching
...
add optflow health to extended status
mavlink heartbeat status to critical on any failsafe
extended status msg to use SYS_STATUS_SENSOR enum
2013-10-03 22:11:55 +09:00
Randy Mackay
3c5797c479
Copter: sent current as -1 to GCS when can't be monitored
2013-10-03 11:16:31 +09:00
Randy Mackay
dab4f032f9
Copter: integrate BattMonitor
2013-10-03 11:16:28 +09:00
Randy Mackay
e295d4555d
Copter: send frame type in mavlink heartbeat msg
2013-09-27 14:35:13 +09:00
Randy Mackay
7cc8a9038f
Copter: move failsafe flags into structure
2013-09-26 19:37:15 +09:00
Randy Mackay
284aa2217f
Copter: remove old comments
2013-09-24 21:45:43 +09:00
Andrew Tridgell
3ffeff04a7
Copter: removed logging of MAVLink parameter changes
...
not much point to this
2013-09-23 18:10:22 +10:00
Andrew Tridgell
35e3c887d2
Copter: use new baro API
2013-09-21 21:30:54 +10:00
Andrew Tridgell
b6a0577723
Copter: only send RC_CHANNELS_SCALED in HIL
...
saves a bit of telemetry bandwidth
2013-09-21 09:30:30 +10:00
Andrew Tridgell
46688454c4
Copter: removed flash_leds() calls
2013-09-19 18:38:28 +10:00
Andrew Tridgell
754bdbd25f
Copter: use new usb_connected() HAL function
2013-09-19 16:24:23 +10:00
Kevin Hester
240a9ccaf0
AC: if vehicle is !flying show hb state as MAV_STATE_STANDBY
...
This helps GCSes determine the appropriate UI for the current vehicle
mode.
2013-09-09 20:51:54 +09:00
Randy Mackay
1d55fa6818
Copter: add arm check of GPS hdop when in Loiter
2013-09-09 14:03:40 +09:00
Andrew Tridgell
979636936d
Copter: support reboot to bootloader
2013-09-04 11:59:02 +10:00
Andrew Tridgell
25d517f5d6
Copter: updates for new notify API
2013-08-30 13:01:35 +10:00
Andrew Tridgell
d5e28e72cc
Copter: support new RADIO_STATUS msg
2013-08-24 17:59:13 +10:00
Andrew Tridgell
01e19a32fe
Copter: use the new scheduler load_average() call
...
this also simplifies the main loop
2013-08-02 18:46:34 +10:00
Randy Mackay
7ea971d948
Copter: check set_mode for failure
...
Previously if set_mode failed it would return the copter to stabilize
mode. With this commit set_mode returns a true/false indicating whether
it succeeded or not so the caller can make the decision as to the
appropriate response which could be to stay in the current flight mode
or try another flight mode.
2013-07-20 11:01:10 +09:00
Randy Mackay
47ab02d686
Copter: bug fix to ROI to pull target from conditional command queue
2013-07-14 17:37:06 +09:00
Randy Mackay
5a40ee7a38
Copter: fix to gps present check in mavlink extended status 1 msg
2013-07-13 10:27:50 +09:00
Randy Mackay
66d7f7b026
Copter: GCS_mavlink only send waypoints to gcs3 if initialised
...
Also Load parameter defaults at initialisation (although defaults are
all zero anyway so should have no effect)
2013-07-13 10:12:01 +09:00
Andrew Tridgell
da4137b731
Copter: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Randy Mackay
0460147a15
Copter: guided mode yaw fix
...
Nose of copter now points at next guided point if it is more than 10m
away
2013-06-02 11:25:35 +09:00
Andrew Tridgell
30df8796ce
Copter: fixed loading of waypoints
...
copter code assumes that command_total includes the home waypoint
2013-05-29 21:44:08 +10:00
Andrew Tridgell
903d5636bb
Copter: added support for partial mission load
...
this allows individual waypoints to be updated in missions
2013-05-29 16:25:05 +10:00
Randy Mackay
1dbe98b566
Copter: display reason for pre-arm-check failures in GCS
2013-05-20 13:03:18 +09:00
Randy Mackay
d10e3bc75f
Copter: send_text_P bug fix for short messages
2013-05-20 12:52:20 +09:00
Randy Mackay
28c37dd798
Copter: do pre-arm checks when arming from GCS
2013-05-17 11:22:32 +09:00
Andrew Tridgell
9feb46c834
Copter: use new accel cal interact over MAVLink
2013-05-08 16:19:26 +10:00
Andrew Tridgell
b6e3e59bc3
Copter: simplify setHIL for baro
2013-05-02 15:26:54 +10:00
Andrew Tridgell
db57c8d7c5
Copter: removed the deprecated HIL sensors interface
...
must use the new HIL_STATE message now
2013-05-02 15:00:50 +10:00
Andrew Tridgell
172d9724df
Copter: use new HIL compass API
2013-05-02 15:00:07 +10:00
Andrew Tridgell
25c576cad7
Copter: replaced constrain() with constrain_float()
2013-05-02 10:26:49 +10:00
Randy Mackay
bab9fa25e5
Copter: add GCS failsafe
2013-04-29 21:30:22 +09:00
Randy Mackay
58d1da2d80
Copter: integrate AC_Fence in place of limits
...
Lesser functionality than limits but saves more than 150 bytes and it
works
2013-04-27 11:14:07 +09:00
Andrew Tridgell
a0708460a4
Copter: convert to new logging system
2013-04-20 13:52:37 +10:00